|
|
Road Course & Autocross Post info about SCCA and Road Course Racing. |
|
Thread Tools | Display Modes |
04-07-2016, 09:52 AM | #1 |
Registered User
Join Date: Mar 2008
Location: Jersey Shore
Posts: 1,349
|
SCCA/ AutoX
So after building the motoring Ive been trying to figure out what I want to do with the car. The initial plan was to twin turbo the car but I might be putting those plans on the back burner or a fox body! After doing research it looks like Id be in the CAM SCCA class. I dont expect to be good in the beginning but I want to build a car thats going to let me be competitive in the future. The mod to the car currently are :
Aluminum DS MM HD adjustable LCA Tokicko Dspec shocks MM PH, TA and rear TA springs FLSFC Aluminum FW KN Intake Forge motor 10.7 compression 294/323 Plans for the near future are MM kmember , forward offset arms and Coil overs and koni DA struts and all the rest of the goodies up front. I dont want to demod but I would possibly do a coyote swap. but Im leaning more toward a all out NA build. Cams stage 3 ported heads, intake etc . Or should I just put a turbo or 2 on it? |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|