2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > "GO" Discussions > Power Adders

Power Adders Superchargers, Turbos, Nitrous, etc...

Reply
 
Thread Tools Display Modes
Old 11-05-2013, 10:31 PM   #1
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Starting my Build

So I've been gathering parts for the past 6 months and now it's time to get things moving.

Parts I have so far:
Used Mach block with crank
Manley .020 over flat tops w/ rings
2013 Boss Rods
ARP hardware
98 Cobra Cams
A set of Ported C Heads (supposedly stage 2 livernois heads but can't confirm)

Once I get my Billet oil pump I will be sending the block to the builder.
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 11-05-2013, 10:54 PM   #2
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Pic of a couple parts.
Attached Images
File Type: jpg DSC_0167.jpg (69.0 KB, 225 views)
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 11-06-2013, 01:49 AM   #3
machdude
Registered User
 
machdude's Avatar
 
Join Date: Dec 2012
Location: so cal
Posts: 389
Re: Starting my Build

Drool... Looks sweet! whats the final goal for the car?
__________________
1st Mach 2nd mustang

Mods: K&N drop filter, Full Mac exhaust with Lt headers, 4:10 gears, eibach sport line springs, tubular cross member, steeda short throw
machdude is offline   Reply With Quote
Old 11-06-2013, 01:44 PM   #4
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

My goal is to have a mid or low 10 second street car.
It will be making around 450 at first. Then once I get a return style fuel system and bigger blower I will be expecting 600-650hp on E-85.
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.

Last edited by SuperMach1; 05-01-2014 at 03:50 PM.
SuperMach1 is offline   Reply With Quote
Old 11-06-2013, 01:58 PM   #5
TKat13
Mach-T
 
TKat13's Avatar
 
Join Date: Jun 2004
Location: DFW
Posts: 2,865
Re: Starting my Build

good luck and have fun.
__________________
Darrell
Black '04 Mach 1
Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67
(100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88
New build - 750rwhp; not track tested (yet)
Mods: Build Log
Paint&Body
Tuned by Manny @ HPP
TKat13 is offline   Reply With Quote
Old 11-07-2013, 10:29 AM   #6
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Thanks man. Can't wait to turn up the boost.
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 11-07-2013, 07:49 PM   #7
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

These just came in today.

Attached Images
File Type: jpg DSC_0171.jpg (157 Bytes, 554 views)
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.

Last edited by SuperMach1; 11-26-2013 at 02:55 PM.
SuperMach1 is offline   Reply With Quote
Old 12-13-2013, 09:28 AM   #8
Mach828
Dark Knight
 
Mach828's Avatar
 
Join Date: Nov 2009
Location: Albuquerque, NM
Posts: 5,759
I'd pay to have the heads looked at. A friend of mine trusted a used set of heads that ended up costing him a motor and eventually had to sell his car because of the added expense.

Sent with a shot of DROID go fast
__________________

Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods.

Tuned by me with SCT Advantage
Mach828 is offline   Reply With Quote
Old 12-13-2013, 02:02 PM   #9
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

[QUO TE =Mach828;1568135]I'd pay to have the heads looked at. A friend of mine trusted a used set of heads that ended up costing him a motor and eventually had to sell his car because of the added expense.

Sent with a shot of DROID go fast[/QUOTE]

the heads are at the shop right now getting freshened up. when I showed him the heads I asked if he thought they're Livernois and he said there's a Good chance they could be. He really liked the ports and since they were used we went ahead and ordered oversize SS valves, did a 4 angle valve job, and new seals.
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 12-04-2014, 09:42 PM   #10
01yellerCobra
Registered User
 
Join Date: Jan 2013
Location: San Diego, CA
Posts: 1,104
Quote:
Originally Posted by 66gam View Post
What is the advantage of e85?
Race gas power at pump gas prices. But you need a big fuel system for it.
__________________
New Ride:
2004 Mystichrome Cobra-Accufab SBTB and plenum, Steeda 2.8" upper, Bassani X, Borla Stingers, Mcleod RXT, MGW shifter, Level 5 halfshafts, chrome FR500's, Stiffler's FIT system and DS safety loop, GT pumps, BA3000, tuned by owner
01yellerCobra is offline   Reply With Quote
Old 12-06-2014, 04:23 PM   #11
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Quote:
Originally Posted by 01yellerCobra View Post
Race gas power at pump gas prices.

Oohh yeeea....
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 01-01-2015, 07:20 PM   #12
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Happy New Year's guys and gals!!! I'm in the process of making a head cooling mod for the back of the heads. Besides that the engine should be going in very soon.
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 01-21-2015, 07:13 PM   #13
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Upr k member is on with new oem motor mounts and the engine is in. I Went by the shop last night and saw them installing the ProCharger back up. My buddy said he'll give me a call when its time to do the first start up, cant wait!!! Other than that I can't find my d@mn tuner

Quick question though. Do you guys think I'll be able to run 93 with my compression and about 10 psi? Or should I stay out of boost till I go return style?
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 01-22-2015, 09:54 AM   #14
Mach828
Dark Knight
 
Mach828's Avatar
 
Join Date: Nov 2009
Location: Albuquerque, NM
Posts: 5,759
What is your current fuel setup?
__________________

Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods.

Tuned by me with SCT Advantage
Mach828 is offline   Reply With Quote
Old 01-22-2015, 02:05 PM   #15
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Svt focus pump, 42lb injectors, aeromotive fuel rails is what I have right now. I already have 80lb injectors, 2 465 pumps, aeromotive fuel regulator, and the fuel rails. I think I just need the fuel hat, lines and fittings to got return style but I wanted to wait on income tax.
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 01-22-2015, 02:29 PM   #16
Mach828
Dark Knight
 
Mach828's Avatar
 
Join Date: Nov 2009
Location: Albuquerque, NM
Posts: 5,759
Re: Starting my Build

Focus pump ain't going to cut it. You should be over 500. I think it will hit high 500s with e85 and an aggressive tune.
__________________

Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods.

Tuned by me with SCT Advantage
Mach828 is offline   Reply With Quote
Old 01-22-2015, 04:17 PM   #17
SHAKN' 04
Registered User
 
SHAKN' 04's Avatar
 
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
Talking Re: Starting my Build

Looks like I'm gonna need a kill setup to run this guy
__________________
**SOLD**04' Mach 1
-Comp Cams 106100's (deg 106/110)
-Eatonswap with 3.4 Pulley
-Full Exhaust (mac lts & xpipe, sss terminator c/b)
-Built Rear w/ 3.55 gears

[B]-Tuned by Lethal Performance of San Antonio
-510hp/478tq
SHAKN' 04 is offline   Reply With Quote
Old 01-22-2015, 05:22 PM   #18
Mach828
Dark Knight
 
Mach828's Avatar
 
Join Date: Nov 2009
Location: Albuquerque, NM
Posts: 5,759
Re: Starting my Build

Get your tuner to run a lot of timing under 4k on e85. Like 22 degrees. Then you can taper it off if you'd like up top. It will run strong.

If my little S trim can run 118 trap times with a 6,500 DA, yours should be able to take down a mid 120 trap CJ coyote in San Antonio. I ran mine at 18 degrees with a little leaded 110 mixed with 91. With e85 you should be good with 18+ and 10lbs. I'd do 22 degrees under 4k and taper it off to 18 at 7k.

Did you swap the snap ring on your auto so you can rev it to 7k?

I'm betting on you vs the ported CJ coyote
__________________

Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods.

Tuned by me with SCT Advantage
Mach828 is offline   Reply With Quote
Old 01-22-2015, 05:38 PM   #19
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Quote:
Originally Posted by SHAKN' 04 View Post
Looks like I'm gonna need a kill setup to run this guy
I think it would a perfect match up if I could use 93. But idk might have to switch to e85 now
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 01-22-2015, 05:33 PM   #20
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Quote:
Originally Posted by Mach828 View Post
Focus pump ain't going to cut it. You should be over 500. I think it will hit high 500s with e85 and an aggressive tune.
I was thinking 475-485 with the auto, but yea I was thinking the pump wasn't enough. For now I just wanna break it in 5,000 miles without doing any wide open throttles. Would that be ok on 93? Or should I just say fuggit and switch the the corn now?
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Old 01-22-2015, 05:47 PM   #21
Mach828
Dark Knight
 
Mach828's Avatar
 
Join Date: Nov 2009
Location: Albuquerque, NM
Posts: 5,759
Break it in WOT on the dyno!
__________________

Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods.

Tuned by me with SCT Advantage
Mach828 is offline   Reply With Quote
Old 01-22-2015, 07:04 PM   #22
SHAKN' 04
Registered User
 
SHAKN' 04's Avatar
 
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
Re: Starting my Build

Haha I'm gonna order a drag setup next month after the tune on 93/E85
__________________
**SOLD**04' Mach 1
-Comp Cams 106100's (deg 106/110)
-Eatonswap with 3.4 Pulley
-Full Exhaust (mac lts & xpipe, sss terminator c/b)
-Built Rear w/ 3.55 gears

[B]-Tuned by Lethal Performance of San Antonio
-510hp/478tq
SHAKN' 04 is offline   Reply With Quote
Old 01-22-2015, 10:45 PM   #23
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Quote:
Originally Posted by SHAKN' 04 View Post
Haha I'm gonna order a drag setup next month after the tune on 93/E85
Your car is going to be a beast bro!!! Idk what im going to do when they tell me it's time for a cage. I don't see myself putting a cage in my car.
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.

Last edited by SuperMach1; 12-20-2015 at 08:40 PM.
SuperMach1 is offline   Reply With Quote
Old 01-22-2015, 10:55 PM   #24
SHAKN' 04
Registered User
 
SHAKN' 04's Avatar
 
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
Re: Starting my Build

Quote:
Originally Posted by SuperMach1 View Post
Your car is gonna be a beast my dude!!! Idk what ima do when they tell me it's time for a cage. I don't see myself putting a cage in my car.
No cage allowed lol. You gonna track the car pretty often? If not then screw it. SAR is closed anyway lol
__________________
**SOLD**04' Mach 1
-Comp Cams 106100's (deg 106/110)
-Eatonswap with 3.4 Pulley
-Full Exhaust (mac lts & xpipe, sss terminator c/b)
-Built Rear w/ 3.55 gears

[B]-Tuned by Lethal Performance of San Antonio
-510hp/478tq
SHAKN' 04 is offline   Reply With Quote
Old 01-22-2015, 11:44 PM   #25
SuperMach1
Never Satisfied
 
SuperMach1's Avatar
 
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
Re: Starting my Build

Quote:
Originally Posted by SHAKN' 04 View Post
No cage allowed lol. You gonna track the car pretty often? If not then screw it. SAR is closed anyway lol
I really want a 10 second slip. But ill wait till I go e85 on 14 psi make a 10 second pass and than get booted. Yea I heard they close down, sucks @ss. I heard rumors about Tim Duncan buying it and another rumor about Valero buying it and turning it into a truck station. But who knows...
__________________
P1 8psi @ 6k
PA Transmission
DD 3,600 Stall
BBK LT's w/ 3in Collector
Custom 3in X-Pipe
Custom 3in CB w/ Pypes 3in M-80's
Built Rear w/ 4:10
415/383
PB 11.80, @ 119 with a 1.71 60ft
Tuned by http://www.southtexasperformance.com/

Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.
SuperMach1 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:49 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<