2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > Buying & Selling > 2003-04 Mach 1 - For Sale/Wanted

2003-04 Mach 1 - For Sale/Wanted Post ONLY 03-04 Mach 1s For sale or wanted. Please Put Year, Color & Location in title!

Reply
 
Thread Tools Display Modes
Old 11-09-2018, 12:10 PM   #1
riverwabbit703
Registered User
 
Join Date: Apr 2018
Location: Clifton, VA
Posts: 4
2003 Mach 1 Torch Red, 45K miles Clifton, VA FS $12500

Hello,

Sadly I've decided to sell my Mach1. Will use to sell proceeds for down payment on a daily driver. It's a technically and cosmetically 9.5/10. Show car, show room condition. It has over 18K in modification including Ford Racing Aluminator all forged motor. Motor has about 10K miles on it. It's garaged kept and rarely driven since I am busy with kids and work and I'm at a age it's time to move on. Below is the modification list. Recently I've installed complete NX Express kit with remote bottle opener, heater and dual purge only to find out local Pepboys closed their speed shop and no longer sells nitrous. Next closest refill station is like 90 minutes from my house. Really wanted to the dual purge spewing nitrous but oh well. I have idle, walkaround and short drive around video. No oil leaks ANYWHERE. Only issue with the car is infamous bellhousing steel cover rattle when cold but goes away in few minutes. Since noise went away after few minutes, I never bothered to fix it. It's a beautiful car and everything is professionally installed. If I was to keep it, I was planning on a blower. It has everything you need. No need to spend money trying to buy a stock mach 1 and spend $$$$. No sloppy work anywhere. PM or email me (riverwabbit703@yahoo.com) if you;re interested. More pictures are available on request. Thanks. Ryan

Ford Racing Aluminator 4.6 4V motor with all forged internals (Original Receipt available)
Not one leak of oil from Motor or Transmission or rear.
NEW MSD COP Coil
NEW NGK TR6 Plugs
C&L 82MM Cold Air Intake
PHP 3/8 inch Intake Spacers
Steeda Underdrive pulleys
NX Express Nitrous System
Dynatune Bottle heater
NX Remote bottle opener
NX Nitrous Dual Purge
Ford SVT Focus 255LP Fuel pump with upgraded lines
Billet lock Fuel Door
Aluminum Flywheel
TR3650 5 Speed Transmission
Autometer 2.5 exterior fuel pressure gauge
All braided steel fuel line hoses
Centerforce Duel Friction HD Clutch
MGW Short Throw Shifter with button shifter knob (you can wire nitrous to this button)
Grant Steering wheel and poly wrap
Autometer 5inch ProComp Programmable/feedback Tachnometer with shift light for every gear.
Firewall Clutch Cable Adjuster
PA Mini Starter
Pacesetter Longtube headers
Kooks High Flow Cats
Pacestter XPipe
Flowmaster 44 Catback
Moroso Aluminum Battery Box and Push/Pull handle Moroso 74111
Optima Red Top Battery in the trunk
Maximum Motor Sports 6 point cage (Swing out ready)
Corbeau Forza Racing Seats
GForce 5 point harness
Maximum Motor Sports Subframe connectors
Maximum Motor Sports Lower Control Arms
Maximum Morot Sports Driveshaft Safely loop
FRPP Aluminum Drive Shaft
Superior 31 Spine Axels
FRPP built 4.30 gears
Steeda Drag Spring bags for rear
UPR springs in the rear, Tokico Drag Shocks
UPR Tublar K member with UPR Adjustable Coilovers
UPR Caster Camber plates
Steeda Tublar 35mm Anti Sway Bar
Swarr Automotive rear axle brace
17X7 Billet Alumimum racing wheels - Front
17x11 Billet Aluminum racing wheels - Back (315x35x17 MT has less than 1000 miles on them)
New Front A-Arm Ball Joints
New rear slotted rotors and brakes
New Oil Change Synthetic
New Transmission fluid change
Complete interior Billet control knobs
Aluminum Coolant flow tank
Blue Silicone hoses
Aluminum Radiator
One stock tune, 93 Octane Tune, NOS Tune, Tip in Retard Dyno Tune by John Lund on SCT tuner.
Airbag Simulator because of aftermarket steering wheel
Aftermarket Horn button
Attached Thumbnails
IMG_2184.jpg   IMG_2447.jpg   IMG_2455.jpg   IMG_2223.jpg   IMG_2010.JPG  

riverwabbit703 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:20 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<