|
03-09-2013, 11:55 PM | #1 |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Stock rear height
Hello, can anyone tell me what is the stock rear ride height from ground to top of fender well lip with stock tires and suspension? Thanks!!!
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
03-10-2013, 05:20 AM | #2 |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: Stock rear height
Any reply will be appreciated, forgot to measure stock ride height before coil over install and want to get it close to stock height, not trying to lower. Thanks Registry!!!
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
03-10-2013, 09:13 AM | #3 |
Registered User
Join Date: Oct 2006
Location: Poughkeepsie, NY
Posts: 446
|
Re: Stock rear height
I forget what it is was before lowering my Mach with Sportlines...... You could always adjust them upward until it begins to look like it's 4 wheel drive and then you'd be about stock height. ;o)
__________________
2003 Mach 1 (Black) ATI PSC1 9# 3-Core Intercooler 62mm BBK TB K&N Airfilter FR 42# Injectors Focus Fuel Pump KB Boost-A-Pump Full SS Bassani Ex. Diablo MAFia Steeda TriAx Shifter Stewart Gauges AEM Air/Fuel Gauge Eibach Sportlines MM Panhardbar SLP Linelock AFS 17x10.5 Mach1 315/35/17 BFG Drag Radials Stock Internals Conservative Tune 438hp/405tq |
03-10-2013, 06:46 PM | #4 |
Original 03 TR Owner
Join Date: Apr 2004
Location: Waco, TX
Posts: 2,860
|
Re: Stock rear height
Mine sitting in the garage is 27 3/4 inches.
Big Ron |
04-08-2013, 08:34 PM | #5 |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: Stock rear height
Reviving with a question. I need to adjust my ride height and my shop has been blowing me off, so... where exactly do I want to place my floor jack in order to adjust the collar on the spring? All I can find is some things about weight off wheels, you guys that may have adjusted the height of your rear coilovers, how did you do it in your driveway without a lift??? Thanks, as well I still have the new pinion snubber to put in, can this be done without the car up on a lift?
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
04-08-2013, 08:37 PM | #6 |
MECHANIC
Join Date: Jun 2012
Location: Morgantown, WV
Posts: 916
|
Re: Stock rear height
jack it up and put the jack stands under the frame members and lower jack so that the suspension just hangs
|
04-08-2013, 08:58 PM | #7 |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: Stock rear height
Mike you are always the one I can count on, what exactly do you mean by frame members? You mean just jack up as if I was changing a flat?? Can you believe I am STILL messing with this, my mechanic would rather have his own s*** in the bay so no lift and I got fed up, sorry about the vent, I have a good floor jack and stands, also do I need that spanner wrench? Once again mechanic said they could be turned by hand, think I will be adjusting up to raise, I feel like a dumba**, should have left it alone
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
04-09-2013, 08:49 AM | #8 |
Parking Lot Racer
Join Date: May 2008
Location: Cherry Hill, NJ
Posts: 790
|
Re: Stock rear height
You can use the rear torque boxes I believe. Or the frame rails/subframe connectors.
__________________
2004 Mach 1 Maximum Motorsports Equipped |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|