Nitrous Install help - 2003-04 Mach 1 Registry Owners Club

02vortec · 10-09-2007, 11:55 AM

hi im new sorry for no intro but i need some help quick

im putting a nitrous kit + msd window switch on a 2004 mach1. I need to know what wires to tap to get the rpm for the window switch.

also what wire can i tap under the dash to get the 12volt key'd ignition.

and also whats the best way to run wires through the fire wall.

Thank you very much.

mach1z · 10-09-2007, 01:11 PM

Go to raptorperformance.com and follow their instruction in what and where to tap into:
http://www.mustanghowto.com/interior...ft%20Light.htm

04azuremach · 10-09-2007, 01:29 PM

Gotta go through the panel on the passenger side, it's the green wire with the white stripe and it's all the way in a corner. Use that for the RPM's. I forgot already which wire I used for the ignition...

02vortec · 10-09-2007, 01:43 PM

that green and white wire also runs down on the driver side of the intake manifold in the big wire loom as well right. i looks like the dyno guys pulled it out of the loom to get @ it.

04azuremach · 10-09-2007, 01:50 PM

Quote:

Originally Posted by 02vortec

that green and white wire also runs down on the driver side of the intake manifold in the big wire loom as well right. i looks like the dyno guys pulled it out of the loom to get @ it.

I believe so yes.. I guess it depends on where you're putting your WS as to where you'd want to splice into it.

02vortec · 10-09-2007, 02:05 PM

gotcha. i will post pictures of the install later 2night.

3150Mach1 · 10-09-2007, 07:33 PM

If you have time, look here. Should have everything you need.
http://www.mach1registry.org/forums/...hlight=nitrous

02vortec · 10-09-2007, 11:53 PM

this is how i wired it. could oyu please check it over and make sure its correct.

thanks

10-09-2007, 11:55 AM	#1
02vortec Guest Join Date: Oct 2007 Location: SW FL Posts: 5	Nitrous Install help hi im new sorry for no intro but i need some help quick im putting a nitrous kit + msd window switch on a 2004 mach1. I need to know what wires to tap to get the rpm for the window switch. also what wire can i tap under the dash to get the 12volt key'd ignition. and also whats the best way to run wires through the fire wall. Thank you very much.

10-09-2007, 01:11 PM	#2
mach1z Registered User Join Date: May 2005 Location: Woodstock,GA Posts: 544	Re: Nitrous Install help Go to raptorperformance.com and follow their instruction in what and where to tap into: http://www.mustanghowto.com/interior...ft%20Light.htm

10-09-2007, 01:29 PM	#3
04azuremach Loud, fast and fun Join Date: Apr 2004 Location: Owning Ricers at MIR Posts: 7,864	Re: Nitrous Install help Gotta go through the panel on the passenger side, it's the green wire with the white stripe and it's all the way in a corner. Use that for the RPM's. I forgot already which wire I used for the ignition...

10-09-2007, 01:43 PM	#4
02vortec Guest Join Date: Oct 2007 Location: SW FL Posts: 5	Re: Nitrous Install help that green and white wire also runs down on the driver side of the intake manifold in the big wire loom as well right. i looks like the dyno guys pulled it out of the loom to get @ it.

10-09-2007, 02:05 PM	#6
02vortec Guest Join Date: Oct 2007 Location: SW FL Posts: 5	Re: Nitrous Install help gotcha. i will post pictures of the install later 2night.

10-09-2007, 07:33 PM	#7
3150Mach1 Love my Mach Join Date: Apr 2005 Location: Charlottesville, VA Posts: 13,678	Re: Nitrous Install help If you have time, look here. Should have everything you need. http://www.mach1registry.org/forums/...hlight=nitrous __________________ 2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt

10-09-2007, 11:53 PM	#8
02vortec Guest Join Date: Oct 2007 Location: SW FL Posts: 5	Re: Nitrous Install help this is how i wired it. could oyu please check it over and make sure its correct. thanks

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)