turbo nitrous hollefy dominator build - 2003-04 Mach 1 Registry Owners Club

iggster · 04-10-2016, 01:46 PM

First and foremost the mod list.

Follow me on instagram or facebook

https://www.facebook.com/smp.sergio

https://www.instagram.com/smptuning/

Just need a driveshaft and engine diaper and steering linkage and car will be racing

4.6 4 valve
built to much to list lol

efi by holley dominator with ls coils

fuel system
160lb injectors
magnafuel pro star 750 fuel pump

mikes vasco ringless powerglide with reid case
shifted by an air shifter from precision air shifter
shifter controlled via the holley
ice tank for the trans

s480 billet by IRT
water to air intercooler

8.8 diff
33 spline axles
5/8 studs
spool

Team z rear suspension, upper and lower contorl arms and anti sway bar

iggster · 04-10-2016, 01:51 PM

now time for some pics

PY6A0528_1

iggster · 04-10-2016, 01:55 PM

The rear end

strange axles 33 spline 5/8 studs and spool team z suspension

iggster · 04-10-2016, 01:57 PM

ice tank for the water to air with rule 2200 pump? I dont remember what pump it has exactly lol

nitrous bottle (100 shot wet on top of 28lbs)
battery in the trunk oddyssey

iggster · 04-10-2016, 02:00 PM

Precision air shifter with some interior shots (you can see the water to air and the ice tank for the trans

iggster · 04-10-2016, 02:04 PM

Here is the trans

mikes vasco powerglide with dump valve (for cars making over 1200rwhp to help with trust bearing issues)

Ultimate converter concepts converter

iggster · 04-10-2016, 02:05 PM

Picture of the nrg wheel with the transbrake button and the bump button on the left

behind it is the holley digital toushcreen dash, raptor dual mode shift light

DSG2003Mach1 · 04-10-2016, 02:17 PM

Looks like a bad *****!

slojunk91 · 04-10-2016, 02:39 PM

Wow!!! Very nice.

311-420 · 04-11-2016, 09:24 AM

Dayum.

Roy · 04-11-2016, 11:59 AM

Your tuner is pretty hot!

sutyak · 04-11-2016, 12:06 PM

Very nice

iggster · 04-11-2016, 08:49 PM

Quote:

Originally Posted by Roy

Your tuner is pretty hot!

I do all the tuning but she is their to give me a hand when needed

iggster · 07-04-2016, 11:02 PM

so finally got it all wrapped up and made 2 videos, will be testing it soon.

https://www.youtube.com/watch?v=Ai6X62T07Ww

https://www.youtube.com/watch?v=Fml2cUFflKI

sutyak · 07-05-2016, 08:47 AM

Looking great!

iggster · 07-16-2016, 05:36 PM

changed the vr cam sensor over to a hall affect to clean up the signal, no missfires at high rpm, also got the holley digital dash mount installed

32VALVR · 07-16-2016, 08:41 PM

Hey Sergio, I thought you sold that car and were done with racing?

littlemags · 07-16-2016, 09:25 PM

Link for that Hall effect can sensor ??

iggster · 07-17-2016, 01:32 AM

Quote:

Originally Posted by 32VALVR

Hey Sergio, I thought you sold that car and were done with racing?

buyer backed out the day he was suppose to send me the cash, he hit me up the other day saying he regrets it, I wont sell it for the price I was going to sell it to him anymore lol

iggster · 07-17-2016, 01:34 AM

Quote:

Originally Posted by littlemags

Link for that Hall effect can sensor ??

You will need these two pieces for the cam sensor, and another 2 if you also wanted to do the crank sensor. I only did the cam, its where everyone gets the problems but some people do both sensors.

http://redline-motorsports-inc.mysho...-4-6-5-4-fords

https://www.holley.com/products/fuel.../parts/554-124

iggster · 07-17-2016, 01:41 AM

with the hall affect cam sensor car goes from cranking to running in .998 seconds.

Before with the vr sensor it would take 1.4 seconds, I knew it would start up faster but I just want to make sure it doesnt do anything funny at high rpms

iggster · 01-22-2017, 11:33 AM

Car is finally done!

I registered to race it at a local event in fontana, February 4th the small tire shootout. It will be competing against high 4 second low 5 second cars.

Here is a video of me playing around with it

https://youtu.be/1FFqRZpqzY0

sutyak · 01-22-2017, 03:54 PM

Looking forward to the results!

iggster · 10-20-2017, 09:32 PM

Took the car out, best has been a 5.6 with a 1.47 60 foot, so I upgraded the suspension recently and added traction control (still on the stock 03 cobra motor with head studs and manley valve springs)

Here is a video it went 5.x at 100mph and some pics of some of hte progress, I plan on taking it out again very soon to see if i can manage a 5.30 or better

https://www.youtube.com/watch?v=Duxpk3ebLow

iggster · 10-20-2017, 09:35 PM

esides the upgraded suspension and traction control I have also added a 300 shot progressive kit and its about 70lbs lighter.

https://www.facebook.com/photo.php?f...size=960%2C720

https://www.facebook.com/photo.php?f...type=3&theater

04-10-2016, 01:46 PM	#1
iggster Registered User Join Date: May 2010 Location: lbc Posts: 56	turbo nitrous hollefy dominator build First and foremost the mod list. Follow me on instagram or facebook https://www.facebook.com/smp.sergio https://www.instagram.com/smptuning/ Just need a driveshaft and engine diaper and steering linkage and car will be racing 4.6 4 valve built to much to list lol efi by holley dominator with ls coils fuel system 160lb injectors magnafuel pro star 750 fuel pump mikes vasco ringless powerglide with reid case shifted by an air shifter from precision air shifter shifter controlled via the holley ice tank for the trans s480 billet by IRT water to air intercooler 8.8 diff 33 spline axles 5/8 studs spool Team z rear suspension, upper and lower contorl arms and anti sway bar Last edited by iggster; 04-10-2016 at 02:02 PM.

04-10-2016, 01:51 PM	#2
iggster Registered User Join Date: May 2010 Location: lbc Posts: 56	Re: turbo nitrous hollefy dominator build now time for some pics PY6A0528_1

04-10-2016, 01:55 PM	#3
iggster Registered User Join Date: May 2010 Location: lbc Posts: 56	Re: turbo nitrous hollefy dominator build The rear end strange axles 33 spline 5/8 studs and spool team z suspension

04-10-2016, 01:57 PM	#4
iggster Registered User Join Date: May 2010 Location: lbc Posts: 56	Re: turbo nitrous hollefy dominator build ice tank for the water to air with rule 2200 pump? I dont remember what pump it has exactly lol nitrous bottle (100 shot wet on top of 28lbs) battery in the trunk oddyssey

04-10-2016, 02:00 PM	#5
iggster Registered User Join Date: May 2010 Location: lbc Posts: 56	Re: turbo nitrous hollefy dominator build Precision air shifter with some interior shots (you can see the water to air and the ice tank for the trans

04-10-2016, 02:04 PM	#6
iggster Registered User Join Date: May 2010 Location: lbc Posts: 56	Re: turbo nitrous hollefy dominator build Here is the trans mikes vasco powerglide with dump valve (for cars making over 1200rwhp to help with trust bearing issues) Ultimate converter concepts converter

04-10-2016, 02:05 PM	#7
iggster Registered User Join Date: May 2010 Location: lbc Posts: 56	Re: turbo nitrous hollefy dominator build Picture of the nrg wheel with the transbrake button and the bump button on the left behind it is the holley digital toushcreen dash, raptor dual mode shift light

04-10-2016, 02:17 PM	#8
DSG2003Mach1 700 HP Mach Join Date: Nov 2003 Location: Orlando, FL Posts: 8,384	Re: turbo nitrous hollefy dominator build Looks like a bad *****! __________________ 03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater

04-10-2016, 02:39 PM	#9
slojunk91 Registered User Join Date: Feb 2013 Location: NEW YORK HIGHEST TAXES IN AMERICA Posts: 603	Re: turbo nitrous hollefy dominator build Wow!!! Very nice.

04-11-2016, 09:24 AM	#10
311-420 Can't be bridled Join Date: Sep 2007 Location: Texas Posts: 7,006	Re: turbo nitrous hollefy dominator build Dayum. __________________ 2004 Mach 1 #6956 5spd w/IUP Eaton swap, longtubes, built 3.73 SRA 452hp/409tq dynojet🏁

04-11-2016, 11:59 AM	#11
Roy Registered User Join Date: Jul 2005 Location: S.E. Mich. Posts: 3,446	Re: turbo nitrous hollefy dominator build Your tuner is pretty hot! __________________ https://m.youtube.com/watch?v=xHkA5tBV1RE

04-11-2016, 12:06 PM	#12
sutyak it's soo-tack Join Date: Nov 2002 Location: Fairmont, WV Posts: 2,082	Re: turbo nitrous hollefy dominator build Very nice __________________ mark 2004 DSG Mach 1. Built motor. Turbo. 667whp 2006 Sonic Blue Focus. Built motor. Turbo. 12.4 @ 115mph (sold) 2003 DSG Mach 1. 12.65 @ 106 (sold)

07-04-2016, 11:02 PM	#14
iggster Registered User Join Date: May 2010 Location: lbc Posts: 56	Re: turbo nitrous hollefy dominator build so finally got it all wrapped up and made 2 videos, will be testing it soon. https://www.youtube.com/watch?v=Ai6X62T07Ww https://www.youtube.com/watch?v=Fml2cUFflKI

07-05-2016, 08:47 AM	#15
sutyak it's soo-tack Join Date: Nov 2002 Location: Fairmont, WV Posts: 2,082	Re: turbo nitrous hollefy dominator build Looking great! __________________ mark 2004 DSG Mach 1. Built motor. Turbo. 667whp 2006 Sonic Blue Focus. Built motor. Turbo. 12.4 @ 115mph (sold) 2003 DSG Mach 1. 12.65 @ 106 (sold)

07-16-2016, 05:36 PM	#16
iggster Registered User Join Date: May 2010 Location: lbc Posts: 56	Re: turbo nitrous hollefy dominator build changed the vr cam sensor over to a hall affect to clean up the signal, no missfires at high rpm, also got the holley digital dash mount installed

07-16-2016, 08:41 PM	#17
32VALVR Registered Mach Abuser Join Date: Apr 2006 Location: SoCal Posts: 1,695	Re: turbo nitrous hollefy dominator build Hey Sergio, I thought you sold that car and were done with racing? __________________ 04 O/W 5sp with Kenne Bell 2.1 intercooled kit@ 10lbs.

07-16-2016, 09:25 PM	#18
littlemags finally paid for Join Date: Nov 2004 Location: Ypsilanti Twp, Mi Posts: 4,077	Re: turbo nitrous hollefy dominator build Link for that Hall effect can sensor ?? __________________ 2004 mach 1-turbo build in progress.. Fast xfi 2.0 OLD combo- 826rwhp/720 trq -100 shot NX 9.13@154 on 100 shot NEW- in progress...

07-17-2016, 01:41 AM	#21
iggster Registered User Join Date: May 2010 Location: lbc Posts: 56	Re: turbo nitrous hollefy dominator build with the hall affect cam sensor car goes from cranking to running in .998 seconds. Before with the vr sensor it would take 1.4 seconds, I knew it would start up faster but I just want to make sure it doesnt do anything funny at high rpms

01-22-2017, 11:33 AM	#22
iggster Registered User Join Date: May 2010 Location: lbc Posts: 56	Re: turbo nitrous hollefy dominator build Car is finally done! I registered to race it at a local event in fontana, February 4th the small tire shootout. It will be competing against high 4 second low 5 second cars. Here is a video of me playing around with it https://youtu.be/1FFqRZpqzY0

01-22-2017, 03:54 PM	#23
sutyak it's soo-tack Join Date: Nov 2002 Location: Fairmont, WV Posts: 2,082	Re: turbo nitrous hollefy dominator build Looking forward to the results! __________________ mark 2004 DSG Mach 1. Built motor. Turbo. 667whp 2006 Sonic Blue Focus. Built motor. Turbo. 12.4 @ 115mph (sold) 2003 DSG Mach 1. 12.65 @ 106 (sold)

10-20-2017, 09:32 PM	#24
iggster Registered User Join Date: May 2010 Location: lbc Posts: 56	Re: turbo nitrous hollefy dominator build Took the car out, best has been a 5.6 with a 1.47 60 foot, so I upgraded the suspension recently and added traction control (still on the stock 03 cobra motor with head studs and manley valve springs) Here is a video it went 5.x at 100mph and some pics of some of hte progress, I plan on taking it out again very soon to see if i can manage a 5.30 or better https://www.youtube.com/watch?v=Duxpk3ebLow

10-20-2017, 09:35 PM	#25
iggster Registered User Join Date: May 2010 Location: lbc Posts: 56	Re: turbo nitrous hollefy dominator build esides the upgraded suspension and traction control I have also added a 300 shot progressive kit and its about 70lbs lighter. https://www.facebook.com/photo.php?f...size=960%2C720 https://www.facebook.com/photo.php?f...type=3&theater

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode