2003-04 Mach 1 Registry Owners Club  


Go Back   2003-04 Mach 1 Registry Owners Club > General Discussions > Surveys & POLLS

Surveys & POLLS Post Registry-wide gerneral surveys and polls here.

View Poll Results: Which item first
Replacement headlights (OEM style) 7 63.64%
Center cap 2 18.18%
Exhaust tips corrected 2 18.18%
Hood struts 0 0%
Voters: 11. You may not vote on this poll

Reply
 
Thread Tools Display Modes
Old 09-18-2020, 04:09 PM   #26
ASH302
Soldier for Christ
 
ASH302's Avatar
 
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
Re: Next item to be done.

Well i'm sure happy I found the trim part and believe it got ran over a few times, because of where it dropped out. either way just happy it is on instead of without. Got it glued on and should be good to go. I did notice the driver headlight had build up in it, but still better than how the other ones were. I guess down the road i'll just have to buy some news and pick from the ones that were suggested before. Either way a am much more happy with these than the other ones.

ASh
Attached Thumbnails
119752401_868271440244719_5775157057660363302_n.jpg   119708595_354038662400021_9119560328883107938_n.jpg  
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006
2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012
2013 grey 6 speed coupe GT Mustang Sold in Feb 2014
2013 RED Dodge Charger R/T Sold Nov 2014
2002 custom Blue 02 Auto Trans AM Sold June 2015
1998 Cobra Black Sold summer 2016

Current
2009 Ford F350 FX4 March 2017 (work truck)
2003 OW 5.0 Mach 1 Aug 2020

ASh
ASH302 is offline   Reply With Quote
Old 09-24-2020, 04:34 PM   #27
ASH302
Soldier for Christ
 
ASH302's Avatar
 
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
Re: Next item to be done.

Well looks like some MRT Hood struts will be sent my way soon.
So I guess everything on my list is checked off and now on to the next items.

Nice thing is that some of these are just fixing up what needs to be corrected so it isn't anything crazy.
I still need to get a center cap, which will happen very soon.

ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006
2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012
2013 grey 6 speed coupe GT Mustang Sold in Feb 2014
2013 RED Dodge Charger R/T Sold Nov 2014
2002 custom Blue 02 Auto Trans AM Sold June 2015
1998 Cobra Black Sold summer 2016

Current
2009 Ford F350 FX4 March 2017 (work truck)
2003 OW 5.0 Mach 1 Aug 2020

ASh
ASH302 is offline   Reply With Quote
Old 09-27-2020, 02:15 PM   #28
311-420
Can't be bridled
 
311-420's Avatar
 
Join Date: Sep 2007
Location: Texas
Posts: 7,005
Re: Next item to be done.

Quote:
Originally Posted by ab_mach1 View Post
I have these...
https://lmr.com/item/LRS-13008V/blac...-mustang-99-04

They fit really good and look excellent. Only drawback was that I needed to seal them with silicone so they wouldn't fog up inside on the damp days etc.

https://youtu.be/s9F8bLuV_j8

If you don't plan to drive it in crappy weather, these should work good.
That sucks they fog up. Did you ever get that issue resolved? Did you do switch backs too? Those clear corners look pretty good on most colors. Azure is one of them.
__________________
2004 Mach 1 #6956 5spd w/IUP
Eaton swap, longtubes, built 3.73 SRA
452hp/409tq dynojet🏁
311-420 is offline   Reply With Quote
Old 09-28-2020, 01:08 PM   #29
ab_mach1
Lorraine's driver
 
ab_mach1's Avatar
 
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
Re: Next item to be done.

Quote:
Originally Posted by 311-420 View Post
That sucks they fog up. Did you ever get that issue resolved? Did you do switch backs too? Those clear corners look pretty good on most colors. Azure is one of them.
Yup, sealing them up with silicone fixed the moisture problem. I originally just had them send another set to replace them, but they were worse lol. I was told by others to heat them up in an oven, take them apart and re-seal them that way, but I thought that sounded stupid. I almost just gave up and bought an OEM set and figured it wouldn't hurt to try putting silicone along the seam and it ended up working.

I like the idea of the switchbacks, but I didn't care too much for the look at night. Too much of a white head-light look for me. I like the amber color on the corners at night.
__________________
  • Instagram: @azurblumach1
  • SCT X3 with LaSota Racing tune
  • Borla Stingers w/JBA off road H pipe
  • MGW short shifter w/comfort handle
  • Eibach Sportlines w/Koni STR.T's and Maximum Motorsports CC plates
ab_mach1 is offline   Reply With Quote
Old 09-28-2020, 01:21 PM   #30
ASH302
Soldier for Christ
 
ASH302's Avatar
 
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
Re: Next item to be done.

Well these d@mn exhaust tips are moving on me, lol. I guess they are just moving from all the bumping going on.
May need to have them tac welded to get them from moving any more.
Just frustrating is all.

ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006
2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012
2013 grey 6 speed coupe GT Mustang Sold in Feb 2014
2013 RED Dodge Charger R/T Sold Nov 2014
2002 custom Blue 02 Auto Trans AM Sold June 2015
1998 Cobra Black Sold summer 2016

Current
2009 Ford F350 FX4 March 2017 (work truck)
2003 OW 5.0 Mach 1 Aug 2020

ASh
ASH302 is offline   Reply With Quote
Old 09-30-2020, 08:03 PM   #31
311-420
Can't be bridled
 
311-420's Avatar
 
Join Date: Sep 2007
Location: Texas
Posts: 7,005
Re: Next item to be done.

Quote:
Originally Posted by ab_mach1 View Post
Yup, sealing them up with silicone fixed the moisture problem. I originally just had them send another set to replace them, but they were worse lol. I was told by others to heat them up in an oven, take them apart and re-seal them that way, but I thought that sounded stupid. I almost just gave up and bought an OEM set and figured it wouldn't hurt to try putting silicone along the seam and it ended up working.

I like the idea of the switchbacks, but I didn't care too much for the look at night. Too much of a white head-light look for me. I like the amber color on the corners at night.
Gotcha. I like the amber too. Glad the silicone got it for you.
__________________
2004 Mach 1 #6956 5spd w/IUP
Eaton swap, longtubes, built 3.73 SRA
452hp/409tq dynojet🏁
311-420 is offline   Reply With Quote
Old 09-30-2020, 08:09 PM   #32
311-420
Can't be bridled
 
311-420's Avatar
 
Join Date: Sep 2007
Location: Texas
Posts: 7,005
Re: Next item to be done.

Quote:
Originally Posted by ASH302 View Post
Well these d@mn exhaust tips are moving on me, lol. I guess they are just moving from all the bumping going on.
May need to have them tac welded to get them from moving any more.
Just frustrating is all.

ASh
Been there...one small tack on the bottom will solve that issue. Not sure why some clamps do that. Definitely frustrating though.
__________________
2004 Mach 1 #6956 5spd w/IUP
Eaton swap, longtubes, built 3.73 SRA
452hp/409tq dynojet🏁
311-420 is offline   Reply With Quote
Old 10-02-2020, 09:56 AM   #33
ASH302
Soldier for Christ
 
ASH302's Avatar
 
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
Re: Next item to be done.

Quote:
Originally Posted by 311-420 View Post
Been there...one small tack on the bottom will solve that issue. Not sure why some clamps do that. Definitely frustrating though.
Probably just do not clamp down as good as other types.

ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006
2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012
2013 grey 6 speed coupe GT Mustang Sold in Feb 2014
2013 RED Dodge Charger R/T Sold Nov 2014
2002 custom Blue 02 Auto Trans AM Sold June 2015
1998 Cobra Black Sold summer 2016

Current
2009 Ford F350 FX4 March 2017 (work truck)
2003 OW 5.0 Mach 1 Aug 2020

ASh
ASH302 is offline   Reply With Quote
Old 10-09-2020, 03:11 PM   #34
ASH302
Soldier for Christ
 
ASH302's Avatar
 
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
Re: Next item to be done.

Alright, so MRT hood struts came in yesterday and got them on today.
For some reason the driver side fender bolt did not like the bracket and was a pain to get it to screw back in, but got it done.
Check that off.

The quadrant and fwa came in, but do not know when those will go on.

ASh

Sorry the engine bay is so dirty
Attached Thumbnails
120303003_949561332202773_1558012721976577578_n.jpg   121154766_781597139306795_7182836243661469729_n.jpg   121157613_676820263215184_456175547116288409_n.jpg   121093625_384998849357369_5481269678444481609_n.jpg   121164707_381725979627206_2270824381637373883_n.jpg  

__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006
2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012
2013 grey 6 speed coupe GT Mustang Sold in Feb 2014
2013 RED Dodge Charger R/T Sold Nov 2014
2002 custom Blue 02 Auto Trans AM Sold June 2015
1998 Cobra Black Sold summer 2016

Current
2009 Ford F350 FX4 March 2017 (work truck)
2003 OW 5.0 Mach 1 Aug 2020

ASh
ASH302 is offline   Reply With Quote
Old 10-09-2020, 11:58 PM   #35
ASH302
Soldier for Christ
 
ASH302's Avatar
 
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
Re: Next item to be done.

Since I'm messing with these MRT hood struts, I thought I go ahead and pull out the C&L air filter and clean it so it is fresh.
After having that out, I thought about pulling the intake piping off and spraying it, so that is what I did.
It is all sprayed black now and back on, will put the air filter on tomorrow and get pictures sometime.

ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006
2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012
2013 grey 6 speed coupe GT Mustang Sold in Feb 2014
2013 RED Dodge Charger R/T Sold Nov 2014
2002 custom Blue 02 Auto Trans AM Sold June 2015
1998 Cobra Black Sold summer 2016

Current
2009 Ford F350 FX4 March 2017 (work truck)
2003 OW 5.0 Mach 1 Aug 2020

ASh
ASH302 is offline   Reply With Quote
Old 10-10-2020, 09:05 AM   #36
ASH302
Soldier for Christ
 
ASH302's Avatar
 
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
Re: Next item to be done.

Air filter is recharged and intake tube sprayed and back on, really happy with the black.

ASh
Attached Thumbnails
121253642_2707367702862516_6266911555295154932_n.jpg   121170563_3323982457720154_8269631717446085839_n.jpg  
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006
2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012
2013 grey 6 speed coupe GT Mustang Sold in Feb 2014
2013 RED Dodge Charger R/T Sold Nov 2014
2002 custom Blue 02 Auto Trans AM Sold June 2015
1998 Cobra Black Sold summer 2016

Current
2009 Ford F350 FX4 March 2017 (work truck)
2003 OW 5.0 Mach 1 Aug 2020

ASh
ASH302 is offline   Reply With Quote
Old 11-17-2020, 10:04 PM   #37
ASH302
Soldier for Christ
 
ASH302's Avatar
 
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
Re: Next item to be done.

ordered the center cap, had to get a new set of 4, but they cost only $15 shipped so all good.

ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006
2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012
2013 grey 6 speed coupe GT Mustang Sold in Feb 2014
2013 RED Dodge Charger R/T Sold Nov 2014
2002 custom Blue 02 Auto Trans AM Sold June 2015
1998 Cobra Black Sold summer 2016

Current
2009 Ford F350 FX4 March 2017 (work truck)
2003 OW 5.0 Mach 1 Aug 2020

ASh
ASH302 is offline   Reply With Quote
Old 11-23-2020, 02:55 PM   #38
ASH302
Soldier for Christ
 
ASH302's Avatar
 
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
Re: Next item to be done.

Well exhaust tips were still moving over.
Come to find out and do not know if true, but the exhaust guy said that stainless steel has an issue with moving over time, because how heat and stainless steel react to one another with clamps.

Either way, figure I have them tach weld them in place and call it good. Guy was so nice, he got me right in and wasn't going to charge me, but I gave him a tip for his work.

ASh
Attached Thumbnails
126873354_415156769864702_4360410302330025636_n.jpg  
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006
2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012
2013 grey 6 speed coupe GT Mustang Sold in Feb 2014
2013 RED Dodge Charger R/T Sold Nov 2014
2002 custom Blue 02 Auto Trans AM Sold June 2015
1998 Cobra Black Sold summer 2016

Current
2009 Ford F350 FX4 March 2017 (work truck)
2003 OW 5.0 Mach 1 Aug 2020

ASh
ASH302 is offline   Reply With Quote
Old 11-24-2020, 10:23 PM   #39
ASH302
Soldier for Christ
 
ASH302's Avatar
 
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
Re: Next item to be done.

Center caps came in today, but I learned a good lesson of making sure they are a 2.5" and not 2.25". so now on the search again for some cheap 2.5".
Live and learn

ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006
2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012
2013 grey 6 speed coupe GT Mustang Sold in Feb 2014
2013 RED Dodge Charger R/T Sold Nov 2014
2002 custom Blue 02 Auto Trans AM Sold June 2015
1998 Cobra Black Sold summer 2016

Current
2009 Ford F350 FX4 March 2017 (work truck)
2003 OW 5.0 Mach 1 Aug 2020

ASh
ASH302 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:04 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com

<