|
01-28-2020, 07:52 PM | #1 |
Registered User
Join Date: Sep 2019
Location: Fresno, CA
Posts: 11
|
MRT StreetSmart CAI help
I recently purchased an 03 AB Mach and it came with a C&L ram air. I also acquired an mrt ss cai but I am missing some parts. The car did not come with the stock MAF housing and the mrt is missing the filter and the nipple that connects the PCV valve hose to the air intake by the TB. I did some research and found the RF-1015 to be the filter and also seen that there was an option for the pro-m maf with the IAT sensor. I also seen that UPR sells a filter that looks to bolt straight on to the air box, is that worth it? Also since my airbox has the hole for the IAT, is that still a relevant add on to get so I can continue to scout those parts? Finally where can I get that air intake to PCV valve nipple or if someone has it can they get me dimensions so I can get something close to it?
I am in the process of restoring the car since it is my daily driver and the previous owner(s) cut the stock springs and it bounces like crazy. The shocks & struts are shot so those are next and I have some tubular A-arms and coilover sleeves currently waiting for the strut funds to be finalized. Also going to replace most front bushings while I am down there since this car just hit 127k miles. This car will mostly see street driving since I plan to preserve it, probably almost no strip trips. Thanks for the help! |
01-28-2020, 08:14 PM | #2 |
Registered User
Join Date: Sep 2019
Location: Fresno, CA
Posts: 11
|
Re: MRT StreetSmart CAI help
This is how she sits as of now. I have AFS 10.5" rears waiting for grip. Also have an h-pipe waiting till after CA smog since she passed when I transferred her. Oh and MM CC plates also waiting for strut funds.
|
01-29-2020, 10:59 AM | #3 | |
Heppasketties
Join Date: Aug 2003
Location: Mercer County, NJ
Posts: 4,760
|
Re: MRT StreetSmart CAI help
Quote:
Scott
__________________
M1R Member #1829 2011 Shelby GT-500 Grabber Blue W/SVT Performance Package Born on Friday, 6-25-2010 Purchased 8-19-2010 2003 Zinc Yellow Auto I/UP (Build #8280 of 9652) Born on Thursday, 7/17/03 Purchased 8-18-2003 first owner Sold 8-19-2010 bought GT500 Purchased again 3-3-2017 fifth owner Purchased for my wife to drive (but she knows I love the car) |
|
01-29-2020, 12:19 PM | #4 |
Registered User
Join Date: Sep 2019
Location: Fresno, CA
Posts: 11
|
Re: MRT StreetSmart CAI help
I circled the PCV nipple I was talking about, and it looks like it has a plug on the bottom of it.
|
01-30-2020, 12:04 PM | #5 |
Heppasketties
Join Date: Aug 2003
Location: Mercer County, NJ
Posts: 4,760
|
Re: MRT StreetSmart CAI help
Ok I'll need to check mine out, you are looking for dimensions. I'll measure what i can and get back to you. I think that its just a connection point to be honest. I've never checked the PCV either so I'll have to look at that too for my own piece of mind. My Mach had about 117,000 miles on it.
__________________
M1R Member #1829 2011 Shelby GT-500 Grabber Blue W/SVT Performance Package Born on Friday, 6-25-2010 Purchased 8-19-2010 2003 Zinc Yellow Auto I/UP (Build #8280 of 9652) Born on Thursday, 7/17/03 Purchased 8-18-2003 first owner Sold 8-19-2010 bought GT500 Purchased again 3-3-2017 fifth owner Purchased for my wife to drive (but she knows I love the car) |
01-30-2020, 12:13 PM | #6 |
Registered User
Join Date: Sep 2019
Location: Fresno, CA
Posts: 11
|
Re: MRT StreetSmart CAI help
Sounds good thank you! As far as your filter are you using the K&N? Also do you have the Pro-M set up with the IAT?
|
01-30-2020, 12:21 PM | #7 |
Heppasketties
Join Date: Aug 2003
Location: Mercer County, NJ
Posts: 4,760
|
Re: MRT StreetSmart CAI help
I do not use any IAT gauges/devices so I would say no on a Pro-M model. I purchased the kit several years ago when the car was petty new like maybe 2004 but don't recall the Pro-M option. I know of a few who made there owns holes for different items in the chrome inlet pipe. Also keep an eye out for people selling MRT parts.. I'd like to pick up one for spares at some point. I still have the original which worked fine. I believe I replaced the filter once with another I bought separately from K & N.
__________________
M1R Member #1829 2011 Shelby GT-500 Grabber Blue W/SVT Performance Package Born on Friday, 6-25-2010 Purchased 8-19-2010 2003 Zinc Yellow Auto I/UP (Build #8280 of 9652) Born on Thursday, 7/17/03 Purchased 8-18-2003 first owner Sold 8-19-2010 bought GT500 Purchased again 3-3-2017 fifth owner Purchased for my wife to drive (but she knows I love the car) |
01-30-2020, 12:29 PM | #8 | |
Registered User
Join Date: Sep 2019
Location: Fresno, CA
Posts: 11
|
Re: MRT StreetSmart CAI help
Quote:
|
|
01-30-2020, 01:06 PM | #9 |
Can't be bridled
Join Date: Sep 2007
Location: Texas
Posts: 7,006
|
Re: MRT StreetSmart CAI help
The Mach uses an integrated IAT sensor. It's in the MAF already.
Toss the pro m idea and stay with stock stuff. It's a stock car. Don't overthink it. Measure the opening of the filter that's on there and use that dimension to order the next filter. My .02
__________________
2004 Mach 1 #6956 5spd w/IUP Eaton swap, longtubes, built 3.73 SRA 452hp/409tq dynojet🏁 |
01-30-2020, 02:41 PM | #10 | |
Registered User
Join Date: Sep 2019
Location: Fresno, CA
Posts: 11
|
Re: MRT StreetSmart CAI help
Quote:
You make sense. I will stick to the stock MAF. Thanks |
|
02-05-2020, 10:26 PM | #11 |
Registered User
Join Date: Sep 2019
Location: Fresno, CA
Posts: 11
|
Re: MRT StreetSmart CAI help
Well I got some pvc pipe from the hardware store for the PCV valve hose and it’s not that bad. Also got some bolts to mount the MAF to the air box.
Excuse the dirty engine as she’s a daily and my 3 kids don’t give me time for the Mach. By the way how do you add pics straight from a phone? Keeps telling me error uploading. |
02-06-2020, 12:18 PM | #12 |
Registered User
Join Date: Sep 2019
Location: Fresno, CA
Posts: 11
|
Re: MRT StreetSmart CAI help
Here is the pic
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|