Do I have it covered? - 2003-04 Mach 1 Registry Owners Club

Hpstang · 08-31-2016, 01:43 PM

This is not my first nitrous set up as I ran one for years on a carbed fox. This is however my first go around with Efi and this is going to be more of a safe street set up. Ok here is my list of parts I'm ordering. Let me know if there is something else I need to keep it as reliable and safe as possible.

1.nitrous outlet Mach 1 hard line plate kit.
2. Nitrous outlet Stage 3 accessories kit (bottle heater,purge,filter,pressure gauge,blow down tube,etc) that comes in the kit
3. Nos window switch/tps
4. Kenne bell 40a boost a pump
5.Aem wideband gauge
6.speed of sound arm consol switch panel with auto meter sport comp 2 elect nitrous gauge
7. Sct x4 dyno tune for 100 shot

DSG2003Mach1 · 08-31-2016, 02:41 PM

I'm not a nitrous guru but I believe innovate has a gauge for nitrous that's also a wideband and can cut it off if it goes lean while spraying. Might be worth looking into

08-31-2016, 01:43 PM	#1
Hpstang Registered User Join Date: Apr 2015 Location: Kingsland ga Posts: 398	Do I have it covered? This is not my first nitrous set up as I ran one for years on a carbed fox. This is however my first go around with Efi and this is going to be more of a safe street set up. Ok here is my list of parts I'm ordering. Let me know if there is something else I need to keep it as reliable and safe as possible. 1.nitrous outlet Mach 1 hard line plate kit. 2. Nitrous outlet Stage 3 accessories kit (bottle heater,purge,filter,pressure gauge,blow down tube,etc) that comes in the kit 3. Nos window switch/tps 4. Kenne bell 40a boost a pump 5.Aem wideband gauge 6.speed of sound arm consol switch panel with auto meter sport comp 2 elect nitrous gauge 7. Sct x4 dyno tune for 100 shot __________________ 2004 Mach 1 torch red, 5 speed, Borla stingers, off road Mac ss pro chamber, k&n drop in,sct x4 with custom dyno tune 308 rwhp 324 rwtq upr delete puck, MM flsfc, wild rides upper and lower torque box reinforcement kit. MGW shifter with standard handle, speed of sound pillar with dual aeroforce gauges,Bullitts black polished lip 17x8 front 17x10.50 nitto 555r's 315/35/17, smoked tail lights,smoked 3rd brake light. Engine dress up parts. It's only just the beginning procharger coming soon

08-31-2016, 02:41 PM	#2
DSG2003Mach1 700 HP Mach Join Date: Nov 2003 Location: Orlando, FL Posts: 8,384	Re: Do I have it covered? I'm not a nitrous guru but I believe innovate has a gauge for nitrous that's also a wideband and can cut it off if it goes lean while spraying. Might be worth looking into __________________ 03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)