Grabber Blue Stripes? - 2003-04 Mach 1 Registry Owners Club

iudelt89 · 04-01-2012, 12:13 AM

Does anyone have a picture of what this would look like? Just ordered black fr500's and I think it could look great in combo with grabber blue striping. I saw a picture somewhere of the new gt500 in black with the grabber blue stripes. It looked fantastic. Just wondering how it would look on my black mach. Anyone know where you could even get grabber blue striping for the mach?

04Mach1Blurr · 04-01-2012, 02:48 PM

Most likely would need it painted on as I don't think the color would come out well on a vinyl. But I'd say the best option is to have someone photo shop or use paint to see how it would look on your car. It may look decent if the side markers were done as well, but in my opinion it wouldn't look right if it was just the hood stripe itself, and at that in a vinyl

iudelt89 · 04-01-2012, 03:25 PM

I wouldn't just do the hood. I agree that would look very off. I might throw the idea of getting the stripes painted on if I ever decide to get the front bumper / hood repainted. Not enough rock chips yet though haha

NastyNate · 04-01-2012, 03:59 PM

I thought I seen a pic of a black mach on here with grabber bluestripes. It looked pretty sweet!

semperfimrn1 · 04-01-2012, 06:20 PM

omg YES do it!! if i had a black mach thats the very first mod i would do!!! the hood and side stripes in grabber blue and the mustang lettering the grabber blue as well.

it will look very good!!! how could those two colors go wrong? just think of the new cobras with that color style. itll look siiiiiick!!

iudelt89 · 04-01-2012, 08:45 PM

Quote:

Originally Posted by semperfimrn1

omg YES do it!! if i had a black mach thats the very first mod i would do!!! the hood and side stripes in grabber blue and the mustang lettering the grabber blue as well.

it will look very good!!! how could those two colors go wrong? just think of the new cobras with that color style. itll look siiiiiick!!

Ya thats what I was thinking. How much do you think it would cost to have something like that done?

Bouttime09 · 04-01-2012, 09:13 PM

Aren't the stripes on the Shelby vinyl? I'm sure vinyl could be done no problem.

Mach828 · 04-01-2012, 10:52 PM

They could just sand the clear on your hood and roof, tape it off for the stripe, spray the grabber blue, then clear over the whole thing. If you don't buy stupid expensive paint, I bet you could get it done for $500.

SuperMach1 · 04-01-2012, 10:57 PM

Ive seen a black one with grabber blue stripe and side stickers here in San Antonio. Looked Baaaad Azzz! Imo

iudelt89 · 04-03-2012, 01:08 AM

Quote:

Originally Posted by SuperMach1

Ive seen a black one with grabber blue stripe and side stickers here in San Antonio. Looked Baaaad Azzz! Imo

I would love to see how that looks. If you see him around town again be sure to stop and take a couple pics of his car

iudelt89 · 04-03-2012, 01:17 AM

Went ahead and attached some pics of the GT500 I mentioned earlier at the top of this thread. Looks sick, so I'm sure it would look sick on my mach. Funny thing is, my father ordered a grabber blue 2013 with black stripes a few weeks back. If I went this route we would have reverse paint combinations.

semperfimrn1 · 04-03-2012, 02:05 AM

you shouldn't even have to second guess this. it would look awesome

iudelt89 · 04-03-2012, 04:36 AM

Quote:

Originally Posted by semperfimrn1

you shouldn't even have to second guess this. it would look awesome

All a matter of money and priorities. Suspension and exhaust first

ASMACH · 04-03-2012, 11:04 AM

Someone needs to photoshop pics asap!

4valve 4tw? · 04-03-2012, 02:36 PM

I vote azure blue strips honestly. I like grabber blue, but its just too Easter egg-ish/kinda a chick color in some light situations. Azure blue seems to have less variations in different lighting. Plus the whole azure blue being exclusive to mach 1's I think carries some weight.

StangFever2846 · 04-06-2012, 04:15 AM

Very quick pic of black with grabber blue.

Tommy Z · 04-08-2012, 03:04 PM

Quote:

Originally Posted by StangFever2846

Very quick pic of black with grabber blue.

I think that looks awesome.

ASH302 · 04-08-2012, 09:08 PM

do it will look sick with the grabber blue
i do Screaming yellow to be honest on a black mach, but the blue will still look great, for sure go for it

ASh

ASH302 · 04-08-2012, 09:08 PM

Quote:

Originally Posted by StangFever2846

Very quick pic of black with grabber blue.

that looks amazing

ASh

ASH302 · 04-08-2012, 09:09 PM

Quote:

Originally Posted by iudelt89

Went ahead and attached some pics of the GT500 I mentioned earlier at the top of this thread. Looks sick, so I'm sure it would look sick on my mach. Funny thing is, my father ordered a grabber blue 2013 with black stripes a few weeks back. If I went this route we would have reverse paint combinations.

i member the first time i saw the GT500 with that color combo i was in love, its just sexy

ASh

StangFever2846 · 04-09-2012, 11:02 PM

Quote:

Originally Posted by txmach302

that looks amazing

ASh

Yeah it does look good, but I think something a little darker like sonic blue would look even better against the black.

ASH302 · 04-10-2012, 12:03 AM

Quote:

Originally Posted by StangFever2846

Yeah it does look good, but I think something a little darker like sonic blue would look even better against the black.

either color will look good its a win/win for sure

ASh

04-01-2012, 12:13 AM	#1
iudelt89 United We Stang Join Date: Jun 2011 Location: Libertyvile, IL Posts: 985	Grabber Blue Stripes? Does anyone have a picture of what this would look like? Just ordered black fr500's and I think it could look great in combo with grabber blue striping. I saw a picture somewhere of the new gt500 in black with the grabber blue stripes. It looked fantastic. Just wondering how it would look on my black mach. Anyone know where you could even get grabber blue striping for the mach? __________________ Black Staggered FR500's, SSS Adrenaline Cat-Back, JBA o/r h-pipe, MGW Short Throw Shifter, H&R SS Springs, Bilstein HD's, MM Bumpsteer, MM CC Plates, Kenny Brown Extreme Subframe Matrix, FRPP Alum Driveshaft, 2000 Cobra R front brake kit, MM pan hard bar, MM LCA's, K&N FIPK Intake, Bama Tune, Shaker Diverter, FRPP 3.73s, Moser 31 spline axles, FRPP diff cover, FRPP Traction-Lok diff, Kenny Brown Brake Ducts '04 Black 5-Speed Mach 1, 2000 Jeep Grand Cherokee

04-01-2012, 02:48 PM	#2
04Mach1Blurr Machinator Join Date: Jul 2008 Location: Leesburg, VA Posts: 2,294	Re: Grabber Blue Stripes? Most likely would need it painted on as I don't think the color would come out well on a vinyl. But I'd say the best option is to have someone photo shop or use paint to see how it would look on your car. It may look decent if the side markers were done as well, but in my opinion it wouldn't look right if it was just the hood stripe itself, and at that in a vinyl __________________ 2004 D.S.G. Mach 1 Mustang I.U.P.(01/22/2004)-04 Cobra Longblock- Posi Ported M122 GT500 Blower - BF 2.93 Upper - 4lb Lower -MGW STS-Bassani cattless X pipe- Borla Stinger Catback-Steeda Bump Steer kit-MM CCs- MM Coilovers 350lb spring- LFP Heat-exchanger- 1inch Shaker Spacer-03 Cobra IRS with FTBR's Full Bushings kit-BF Diff Brace-3:55 gears -T56 Tranzilla- cut 04 coupe rear springs-Viper Remote Start/Alarm system-Ipod Auxilary-SLP LL-Tune coming soon

04-01-2012, 03:25 PM	#3
iudelt89 United We Stang Join Date: Jun 2011 Location: Libertyvile, IL Posts: 985	Re: Grabber Blue Stripes? I wouldn't just do the hood. I agree that would look very off. I might throw the idea of getting the stripes painted on if I ever decide to get the front bumper / hood repainted. Not enough rock chips yet though haha __________________ Black Staggered FR500's, SSS Adrenaline Cat-Back, JBA o/r h-pipe, MGW Short Throw Shifter, H&R SS Springs, Bilstein HD's, MM Bumpsteer, MM CC Plates, Kenny Brown Extreme Subframe Matrix, FRPP Alum Driveshaft, 2000 Cobra R front brake kit, MM pan hard bar, MM LCA's, K&N FIPK Intake, Bama Tune, Shaker Diverter, FRPP 3.73s, Moser 31 spline axles, FRPP diff cover, FRPP Traction-Lok diff, Kenny Brown Brake Ducts '04 Black 5-Speed Mach 1, 2000 Jeep Grand Cherokee

04-01-2012, 03:59 PM	#4
NastyNate Registered User Join Date: Mar 2008 Location: Jersey Shore Posts: 1,349	Re: Grabber Blue Stripes? I thought I seen a pic of a black mach on here with grabber bluestripes. It looked pretty sweet!

04-01-2012, 06:20 PM	#5
semperfimrn1 Registered User Join Date: Dec 2009 Location: Austin, Tx Posts: 130	Re: Grabber Blue Stripes? omg YES do it!! if i had a black mach thats the very first mod i would do!!! the hood and side stripes in grabber blue and the mustang lettering the grabber blue as well. it will look very good!!! how could those two colors go wrong? just think of the new cobras with that color style. itll look siiiiiick!!

04-01-2012, 09:13 PM	#7
Bouttime09 Registered User Join Date: Aug 2011 Location: Hampton, VA Posts: 206	Re: Grabber Blue Stripes? Aren't the stripes on the Shelby vinyl? I'm sure vinyl could be done no problem.

04-01-2012, 10:52 PM	#8
Mach828 Dark Knight Join Date: Nov 2009 Location: Albuquerque, NM Posts: 5,759	Re: Grabber Blue Stripes? They could just sand the clear on your hood and roof, tape it off for the stripe, spray the grabber blue, then clear over the whole thing. If you don't buy stupid expensive paint, I bet you could get it done for $500. __________________ Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods. Tuned by me with SCT Advantage

04-01-2012, 10:57 PM	#9
SuperMach1 Never Satisfied Join Date: Sep 2007 Location: San Antonio, TX Posts: 1,134	Re: Grabber Blue Stripes? Ive seen a black one with grabber blue stripe and side stickers here in San Antonio. Looked Baaaad Azzz! Imo __________________ P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon.

04-03-2012, 01:17 AM	#11
iudelt89 United We Stang Join Date: Jun 2011 Location: Libertyvile, IL Posts: 985	Re: Grabber Blue Stripes? Went ahead and attached some pics of the GT500 I mentioned earlier at the top of this thread. Looks sick, so I'm sure it would look sick on my mach. Funny thing is, my father ordered a grabber blue 2013 with black stripes a few weeks back. If I went this route we would have reverse paint combinations. Attached Thumbnails __________________ Black Staggered FR500's, SSS Adrenaline Cat-Back, JBA o/r h-pipe, MGW Short Throw Shifter, H&R SS Springs, Bilstein HD's, MM Bumpsteer, MM CC Plates, Kenny Brown Extreme Subframe Matrix, FRPP Alum Driveshaft, 2000 Cobra R front brake kit, MM pan hard bar, MM LCA's, K&N FIPK Intake, Bama Tune, Shaker Diverter, FRPP 3.73s, Moser 31 spline axles, FRPP diff cover, FRPP Traction-Lok diff, Kenny Brown Brake Ducts '04 Black 5-Speed Mach 1, 2000 Jeep Grand Cherokee

04-03-2012, 02:05 AM	#12
semperfimrn1 Registered User Join Date: Dec 2009 Location: Austin, Tx Posts: 130	Re: Grabber Blue Stripes? you shouldn't even have to second guess this. it would look awesome

04-03-2012, 11:04 AM	#14
ASMACH Registered User Join Date: Feb 2008 Location: Carbondale IL Posts: 478	Re: Grabber Blue Stripes? Someone needs to photoshop pics asap! __________________ Black 03 Mach 1 IUP. MMR 900sb 8.5:1 Eaton swapped JLT RAI, MAC Prochamber, SSS Terminator catback, MGW Shifter, MM Coilovers & Panhard Bar, 4.10's, X3 tune by Amazonracing, Pro Motion 3650, 04 Cobra Clutch, and SPEC Alum Flywheel

04-03-2012, 02:36 PM	#15
4valve 4tw? Registered User Join Date: Aug 2011 Location: Parkesburg, PA Posts: 1,084	Re: Grabber Blue Stripes? I vote azure blue strips honestly. I like grabber blue, but its just too Easter egg-ish/kinda a chick color in some light situations. Azure blue seems to have less variations in different lighting. Plus the whole azure blue being exclusive to mach 1's I think carries some weight.

04-06-2012, 04:15 AM	#16
StangFever2846 MMM, SHAKER!!! Join Date: Aug 2008 Location: Texas Posts: 539	Re: Grabber Blue Stripes? Very quick pic of black with grabber blue. Attached Thumbnails __________________ 2003 TR Mach 1 5-Spd Non-IUP #108 of 9652 Dyno tuned, C&L 85mm CAI, MRT Catted H, Mac SS Catback, JLT Oil Separator, MGW Short Throw/Orange handle, Rich1's Shaker Air Diverter, Fiore Clutch Quad/FWA, AFS Mach 1 MAC Black Replicas 17X9/10.5, Nitto NT555 G2's in 275/315, Steeda (Sport Springs, Bumpsteer Kit and X2's), Tokico Blues, 2003 Cobra Clutch, Explicit Auto's Aluminum Finish Retro Rings, IUP upgrades, Craig's No Drill LP Bracket, MGW Satin Finish Interior Bling, Web Electric Sequentials

04-08-2012, 09:08 PM	#18
ASH302 Soldier for Christ Join Date: May 2009 Location: Willis, TX at The Daddy ASh Ranch Posts: 30,596	Re: Grabber Blue Stripes? do it will look sick with the grabber blue i do Screaming yellow to be honest on a black mach, but the blue will still look great, for sure go for it ASh __________________ 2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode