|
01-27-2015, 09:43 PM | #151 | |
Never Satisfied
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
|
Re: Starting my Build
Quote:
Yes, snap ring has been swapped. Highest I ever spinned it to was 6,800 rpm so far.
__________________
P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon. |
|
01-27-2015, 10:22 PM | #152 |
Registered User
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
|
Re: Starting my Build
Haha then we'll have to see how it plays out when both cars are done.
__________________
**SOLD**04' Mach 1 -Comp Cams 106100's (deg 106/110) -Eatonswap with 3.4 Pulley -Full Exhaust (mac lts & xpipe, sss terminator c/b) -Built Rear w/ 3.55 gears [B]-Tuned by Lethal Performance of San Antonio -510hp/478tq |
02-13-2015, 10:06 AM | #153 |
Never Satisfied
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
|
Re: Starting my Build
I didn't want drop to much on the fuel system so i ordered lethals budget return system. Should be here today or Monday. I guess I can turn up the boost now
__________________
P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon. |
05-19-2015, 06:13 PM | #154 |
Never Satisfied
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
|
Re: Starting my Build
__________________
P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon. Last edited by SuperMach1; 05-20-2015 at 05:11 PM. |
06-13-2015, 07:32 AM | #155 |
Registered User
Join Date: Jun 2014
Location: manalapan
Posts: 227
|
Re: Starting my Build
Did you ever finish this project how much power did it make any track times
|
06-13-2015, 09:05 AM | #156 |
Registered User
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
|
Re: Starting my Build
Waiting for injector install and new tune on E85. Track is open and I'll be waiting sir
__________________
**SOLD**04' Mach 1 -Comp Cams 106100's (deg 106/110) -Eatonswap with 3.4 Pulley -Full Exhaust (mac lts & xpipe, sss terminator c/b) -Built Rear w/ 3.55 gears [B]-Tuned by Lethal Performance of San Antonio -510hp/478tq |
06-16-2015, 09:11 PM | #157 |
Never Satisfied
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
|
Re: Starting my Build
Nah man, car is still at the shop getting looked over. I'll be taking it somewhere else soon if they don't get started on it.
__________________
P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon. |
06-16-2015, 09:14 PM | #158 | |
Never Satisfied
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
|
Re: Starting my Build
Quote:
Did you already swap intakes? That thing is going to be a beast NA. But not enough....lol
__________________
P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon. |
|
06-16-2015, 11:03 PM | #159 |
Registered User
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
|
Re: Starting my Build
Yep. Gonna order a drag/kill set up for it and hit the track
__________________
**SOLD**04' Mach 1 -Comp Cams 106100's (deg 106/110) -Eatonswap with 3.4 Pulley -Full Exhaust (mac lts & xpipe, sss terminator c/b) -Built Rear w/ 3.55 gears [B]-Tuned by Lethal Performance of San Antonio -510hp/478tq |
06-22-2015, 08:30 PM | #160 |
Never Satisfied
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
|
Re: Starting my Build
Lucky you!!! Hmu with the times. Im sure you'll be at the track before my car is ready...
__________________
P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon. |
08-07-2015, 08:27 PM | #161 |
Never Satisfied
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
|
Re: Starting my Build
And she Lives!!!!!!
__________________
P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon. |
08-08-2015, 10:38 PM | #162 |
Never Satisfied
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
|
Re: Starting my Build
__________________
P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon. |
08-08-2015, 10:44 PM | #163 |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: Starting my Build
Awesome !! I wish my P1 was loud like that, mine is really quiet, all you hear is the Tial, blower does more of a marble in a coffee can than a sweet whine like that...mucho congrats
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
08-10-2015, 11:04 PM | #164 |
Registered User
Join Date: Aug 2011
Location: Helotes, TX
Posts: 179
|
Re: Starting my Build
that thing is screaming. Sounds good! You gotta love that initial start up when all the work is paying off. Who is gonna tune it for you? Lethal did a good job in mine with a conservative tune making 533.
|
08-11-2015, 01:38 PM | #165 |
Never Satisfied
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
|
Re: Starting my Build
Thanks Not a GT.
Lonestar, Chris at South Texas Performance has always done my tuning, I think im just going to stick with him. Whats your setup and what fuel?
__________________
P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon. |
08-11-2015, 01:50 PM | #166 | |
Registered User
Join Date: Aug 2011
Location: Helotes, TX
Posts: 179
|
Re: Starting my Build
Quote:
I have since this last picture moved the blow off valve to the hot side of the intercooler. |
|
08-11-2015, 08:18 PM | #167 |
Never Satisfied
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
|
Re: Starting my Build
Good numbers and sweet build! Are your cams degreed? and is Shawn back at lethal doing the tunig?
__________________
P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon. |
08-11-2015, 10:41 PM | #168 |
Registered User
Join Date: Aug 2011
Location: Helotes, TX
Posts: 179
|
Re: Starting my Build
Thanks man! Likewise you to have a pretty sick build! I can't wait to see what numbers she'll put down. Yes Kotzur degreed the cams, I don't know the specs tho, I just paid the bill . Yes Shawn is still over at Lethal, he has tuned my car for all three sessions that I've had over there. Maybe one night we'll all have to make a trip out to San Antonio Raceway now that it's open again.
|
08-12-2015, 08:01 PM | #169 |
Never Satisfied
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
|
Re: Starting my Build
For sure!
__________________
P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon. |
08-14-2015, 05:52 PM | #170 |
Never Satisfied
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
|
Re: Starting my Build
Quote:
__________________
P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon. |
12-01-2015, 04:51 PM | #171 |
Never Satisfied
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
|
Re: Starting my Build
Car should be on the dyno next week (finally). Now it's time for the guessing game. What are your thoughts on hp/torque? Im guessing or hoping for 540/500 to the wheels.
-Forged block -11.3 cr -Slightly ported heads, 1mm intake valves, 4 angle valve job -98 cobra intake cams degreed @114/114 -3in. Exhaust -P1 11-12 psi -E-85. *Built Auto w/ 3600 stall
__________________
P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon. Last edited by SuperMach1; 12-01-2015 at 10:31 PM. |
03-09-2016, 01:31 PM | #172 |
Never Satisfied
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
|
Re: Starting my Build
Its been a while so i thought I'd update this. My car was having transmission issues on the dyno so I had to get it rebuit. Also went ahead and ordered a Circle D 3800 triple disk converter . The transmission builder told me it would handle 850hp which is more then what i need but i can't complain. And I'm hoping to have the Mach back within in the next 2 weeks (fingers crossed).
This Sh!t is starting to get reaaaallly expensive!!! I'm just glad i haven't gave up on it.
__________________
P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon. |
03-09-2016, 01:41 PM | #173 |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
Re: Starting my Build
Thanks for the updating, sucks about having it on the dyno and issues come up and nothing wrong with being safer on what parts you are adding in there.
the two weeks will be here before you know it. good luck once you get her back ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh |
03-09-2016, 04:13 PM | #174 | |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: Starting my Build
Quote:
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
|
03-09-2016, 06:28 PM | #175 | |
Mach-T
Join Date: Jun 2004
Location: DFW
Posts: 2,865
|
Re: Starting my Build
Quote:
400rwhp - impressive and can hide the expense from the family, maintenance, take lunch to work. 500rwhp - getting serious and the wife's eyebrows are creeping higher 600rwhp - hp curve is almost pure vertical, so is your budget expense. No hiding this budget, you have officially joined insanity because you cannot justify any of it. (fwiw, 'but look at how happy I am' does NOT work) 750rwhp+ - Pure race car, no justification, just throw the budget out the window, you are way over your original estimate. Time to man up and buy her a mustang of her own, that is the only way she will understand. as a sub note; from family and co-workers I never get ask how fast, quick, etc. The number 1 question is alway 'what is the MPG'; this deserves a slap on the back of the head, I'd drive a prius if I was concerned about that. BTW, it is 10MPG city, 14 highway. lol
__________________
Darrell Black '04 Mach 1 Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67 (100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88 New build - 750rwhp; not track tested (yet) Mods: Build Log Paint&Body Tuned by Manny @ HPP |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|