|
07-23-2015, 11:38 AM | #1401 |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: The Wheel Pictures Thread
So, question. I am looking at getting 17 x 10.5 rims for rear and running a 315/35R 17 Nitto 555R. Will these fit under rear with no issues. Rear has stock springs, front has 1/2 coil cut and will keep my 275 upfront. Dont want to pull the trigger and then kave rubbing or have to roll fenders, thanks guys
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
07-23-2015, 02:00 PM | #1402 |
Registered User
Join Date: May 2011
Location: sc
Posts: 135
|
Re: The Wheel Pictures Thread
[QUOTE=not a gt;1604454]So, question. I am looking at getting 17 x 10.5 rims for rear and running a 315/35R 17 Nitto 555R. Will these fit under rear with no issues. Rear has stock springs, front has 1/2 coil cut and will keep my 275 upfront. Dont want to pull the trigger and then kave rubbing or have to roll fenders, thanks guys[/Q
you will be fine, i had 315/35/17 NT05 and worked perfect |
07-23-2015, 06:28 PM | #1403 | |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: The Wheel Pictures Thread
[QUOTE=mr-proper;1604459]
Quote:
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
|
07-24-2015, 06:34 PM | #1404 |
saving pennies
Join Date: Apr 2008
Location: Griffin, Ga
Posts: 1,487
|
Re: The Wheel Pictures Thread
I cut 1-1/4 coil off on my car with 315's. A lot bigger drop than what you are doing, but I had to roll my fenders because they were cutting in to the tire. If you have any issues with that at all let me know. I have an eastwood fender roller I'll let you borrow.
__________________
03 Mach 1--Auto, 4000 stall, 96 cobra intake cams, 4.10s, ARH L/T's, off road X, Moser 31 spline axles, Eaton Posi diff., MM FLSFC, Tokico D-Specs, k&n filter, 17x9/10.5s AFS Mac wheels 03 Cobra--18x9/10.5 TSW Nurburgring Wheels, Nitto NT05's 275/295, Stiegemeier ported, 2.87” pulley, Canton 9-qt oil pan, Spec Stage II clutch, MM coilovers, Bilstein Shocks/Struts, LFP heat exchanger, LFP radiator, Evans cooling system, 14" Brembo 4 Piston calipers, 470whp, 460ft-lbs |
07-24-2015, 08:13 PM | #1405 | |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: The Wheel Pictures Thread
Quote:
Thanks man, I may only cut 1/2 coil on rear like I did the fronts..you still owe me a meet up/cruise
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
|
07-26-2015, 07:34 PM | #1406 |
saving pennies
Join Date: Apr 2008
Location: Griffin, Ga
Posts: 1,487
|
Re: The Wheel Pictures Thread
I haven't forgot. I think about it every time I see a show or event down your way. At some point life and weekends will slow down enough for me to make it down there.
__________________
03 Mach 1--Auto, 4000 stall, 96 cobra intake cams, 4.10s, ARH L/T's, off road X, Moser 31 spline axles, Eaton Posi diff., MM FLSFC, Tokico D-Specs, k&n filter, 17x9/10.5s AFS Mac wheels 03 Cobra--18x9/10.5 TSW Nurburgring Wheels, Nitto NT05's 275/295, Stiegemeier ported, 2.87” pulley, Canton 9-qt oil pan, Spec Stage II clutch, MM coilovers, Bilstein Shocks/Struts, LFP heat exchanger, LFP radiator, Evans cooling system, 14" Brembo 4 Piston calipers, 470whp, 460ft-lbs |
07-27-2015, 09:44 PM | #1407 |
Registered User
Join Date: Oct 2009
Location: Valdosta, GA
Posts: 68
|
Re: The Wheel Pictures Thread
18x8 TSW's. Gotta thank not a gt for getting me a killer deal sometime back
|
07-28-2015, 04:08 PM | #1408 |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: The Wheel Pictures Thread
They look really good on there
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
07-29-2015, 01:29 AM | #1409 |
Registered User
Join Date: Jun 2010
Location: Radiator Springs
Posts: 208
|
Re: The Wheel Pictures Thread
__________________
2001 Bullitt true blue Fully Built (Daily Driver) 2003 Mach 1 Azure Blue (weekend ride) 2003 Cobra Competition Orange (weekend ride) |
09-18-2015, 04:56 PM | #1410 |
Registered User
Join Date: Jul 2014
Location: Lincoln, Ne
Posts: 5
|
Re: The Wheel Pictures Thread
I have been looking at the 17 x 10.5 Mach 1 wheels for a while and want to purchase a pair with the grey inserts. Does anyone know where I could find a new pair? I use to look on eBay, but haven't seen them listed in some time. I also know AFSwheels use to sell them back in the day, but I haven't found a place recently that would have them in stock.
http://www.shop.afswheels.com/Mach-1...1.htm?page=all http://www.ebay.com/itm/AFS-fits-199...-/331204910746 |
11-02-2015, 11:22 AM | #1411 | |
Registered User
Join Date: Apr 2015
Location: Kingsland ga
Posts: 398
|
Re: The Wheel Pictures Thread
Quote:
__________________
2004 Mach 1 torch red, 5 speed, Borla stingers, off road Mac ss pro chamber, k&n drop in,sct x4 with custom dyno tune 308 rwhp 324 rwtq upr delete puck, MM flsfc, wild rides upper and lower torque box reinforcement kit. MGW shifter with standard handle, speed of sound pillar with dual aeroforce gauges,Bullitts black polished lip 17x8 front 17x10.50 nitto 555r's 315/35/17, smoked tail lights,smoked 3rd brake light. Engine dress up parts. It's only just the beginning procharger coming soon |
|
11-04-2015, 04:53 PM | #1412 |
Registered User
Join Date: Dec 2010
Location: Jackson, TN
Posts: 308
|
Re: The Wheel Pictures Thread
Ermergerd those Weld RTS, much want!!! Yes need to know BS on those that clear the brakes!
__________________
2003 Mach 1 Aluminator // Eaton @ 10lbs // T56 Magnum // E85 Build thread: http://www.svtperformance.com/forums...-Picture-Heavy IG: boostedmach |
11-04-2015, 06:06 PM | #1413 |
Registered User
Join Date: Feb 2013
Location: NEW YORK HIGHEST TAXES IN AMERICA
Posts: 603
|
Re: The Wheel Pictures Thread
|
05-02-2016, 10:43 AM | #1414 |
Registered User
Join Date: May 2007
Location: Leesburg, VA
Posts: 1,985
|
Re: The Wheel Pictures Thread
its been a long time since I've posted. Here's how it sits now with 18x9 and 18x10's. 275/35 and 305/35
__________________
2003 Azure Blue Mach 1 Stock bottom end/compression Eaton M112 Stock upper Stock lower K&N intake Built T56 Bassani mid length headers Bassani catted x pipe Bassani slash cut tip catback Stock 03 Cobra IRS 18x9/10 Forgestar F14 Tuned by Chris Macduff at IMA motorsports 429hp 407 tq @ 7.5 lbs of boost |
05-02-2016, 09:51 PM | #1415 | |
Lorraine's driver
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
|
Quote:
They look great!
__________________
|
|
05-04-2016, 02:38 PM | #1416 |
Registered User
Join Date: Oct 2013
Location: Attalla Alabama
Posts: 130
|
Re: The Wheel Pictures Thread
Not a fan of black wheels, but I do think they look good on blue cars. That AB Mach is really sweet!
|
05-04-2016, 09:53 PM | #1417 |
Lorraine's driver
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
|
Instagram - @ab_mach1
__________________
|
05-05-2016, 07:11 AM | #1418 |
Registered User
Join Date: Dec 2015
Location: Selden, NY
Posts: 96
|
Re: The Wheel Pictures Thread
Ford Racing Bullitt Wheels
Front 17 x 9 w/ Falken Azenis FK452, 245/45 ZR17 Rear 17 x 10.5 w/ Mickey Thompson ET Street Drag Radials P315/35R17
__________________
04 Mach 1, Aluminum 4.6L DOHC w/Procharger P1SC & Stage II 3 Core Intercooler Level 10 4R70W, Convertor, 8.8 w/3.5 Posi, Snow Perf Stage 2 Methanol Injection |
03-14-2017, 02:16 PM | #1419 |
Original Owner
Join Date: Apr 2003
Location: Houston, Texas
Posts: 5,172
|
Re: The Wheel Pictures Thread
Changed shoes
Decided to do all gloss black fr5's
__________________
JB 03 Torch Red Mach 1 21 FJG Mach 1 Stainless Steel Systems Adrenaline Series BBK long tube headers catted x pipe 18x9 18x10- Solid Gloss Black FR5's Nitto 555 g2 275/35r18's 285/35r18 MGW Shifter With Mach1 Shift Knob 4.10's & 31 spline Mosers and 31 Spline Posi Steeda Sport Springs Tokiko Illuminas J@M weight Jacker LCA's J@M Rear UCA's J@M Braided steel brake lines Eibach Sway Bars |
03-14-2017, 02:44 PM | #1420 |
Registered User
Join Date: Aug 2011
Location: Rogers, AR
Posts: 1,070
|
Re: The Wheel Pictures Thread
What did you change from?
__________________
2003 AB Mach 1 Build date: June 19, 2003 -P1-SC kit -Magnaflow Catted X w/ Borla Stingers -MGW Shifter -H&R SS springs -18" AFS reps -Treated better than my wife |
03-14-2017, 03:00 PM | #1421 |
Original Owner
Join Date: Apr 2003
Location: Houston, Texas
Posts: 5,172
|
Re: The Wheel Pictures Thread
Black with Polished lip Cobra R's
__________________
JB 03 Torch Red Mach 1 21 FJG Mach 1 Stainless Steel Systems Adrenaline Series BBK long tube headers catted x pipe 18x9 18x10- Solid Gloss Black FR5's Nitto 555 g2 275/35r18's 285/35r18 MGW Shifter With Mach1 Shift Knob 4.10's & 31 spline Mosers and 31 Spline Posi Steeda Sport Springs Tokiko Illuminas J@M weight Jacker LCA's J@M Rear UCA's J@M Braided steel brake lines Eibach Sway Bars |
03-16-2017, 11:50 AM | #1422 |
Can't be bridled
Join Date: Sep 2007
Location: Texas
Posts: 7,006
|
Re: The Wheel Pictures Thread
Looks good JB! I've liked all the wheel setups you've ran. Hopefully you kept the magnums to switch back and forth between! TR gives so many wheel color/style options that look awesome.
__________________
2004 Mach 1 #6956 5spd w/IUP Eaton swap, longtubes, built 3.73 SRA 452hp/409tq dynojet🏁 |
03-16-2017, 06:45 PM | #1423 |
Original Owner
Join Date: Apr 2003
Location: Houston, Texas
Posts: 5,172
|
Re: The Wheel Pictures Thread
Thanks for the comment. I guess with all the choices i cannot help myself.
decided this time to go back to 18x9's because of all the problems i was having cutting into the 285's on the 10's in the rear. Decided i did not want to modify the quarter lip on a car that had only 2513 in my color in 2003. It was much easier just to swap to a 18x9...(gutless i know...but...) Actually, sold the magnums @ 3 years ago...we were in the process of designing a new one at the time (bad move on my part) but unfortunately that kinda fizzled out. Try to do something new every time its time for a new set of tires...
__________________
JB 03 Torch Red Mach 1 21 FJG Mach 1 Stainless Steel Systems Adrenaline Series BBK long tube headers catted x pipe 18x9 18x10- Solid Gloss Black FR5's Nitto 555 g2 275/35r18's 285/35r18 MGW Shifter With Mach1 Shift Knob 4.10's & 31 spline Mosers and 31 Spline Posi Steeda Sport Springs Tokiko Illuminas J@M weight Jacker LCA's J@M Rear UCA's J@M Braided steel brake lines Eibach Sway Bars |
03-16-2017, 06:53 PM | #1424 |
Original Owner
Join Date: Apr 2003
Location: Houston, Texas
Posts: 5,172
|
Re: The Wheel Pictures Thread
Also added these with the new wheels...
__________________
JB 03 Torch Red Mach 1 21 FJG Mach 1 Stainless Steel Systems Adrenaline Series BBK long tube headers catted x pipe 18x9 18x10- Solid Gloss Black FR5's Nitto 555 g2 275/35r18's 285/35r18 MGW Shifter With Mach1 Shift Knob 4.10's & 31 spline Mosers and 31 Spline Posi Steeda Sport Springs Tokiko Illuminas J@M weight Jacker LCA's J@M Rear UCA's J@M Braided steel brake lines Eibach Sway Bars |
04-02-2017, 10:15 AM | #1425 |
Registered User
Join Date: Aug 2005
Location: Norman, OK
Posts: 465
|
Re: The Wheel Pictures Thread
New Wheels
Last edited by UNLUCKIER; 04-02-2017 at 10:19 AM. Reason: adding pic |
Currently Active Users Viewing This Thread: 16 (0 members and 16 guests) | |
|
|