|
05-07-2014, 10:40 AM | #76 |
Mach-T
Join Date: Jun 2004
Location: DFW
Posts: 2,865
|
Re: Starting my Build
Yes, this is what I have read as well, mine was used and I had it 'cleaned up'. Figured it was rumored to be stronger, for the money it was a good durability upgrade, I will never reach that HP level.
__________________
Darrell Black '04 Mach 1 Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67 (100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88 New build - 750rwhp; not track tested (yet) Mods: Build Log Paint&Body Tuned by Manny @ HPP |
05-09-2014, 12:11 AM | #77 |
Registered User
Join Date: Sep 2012
Location: Queen Creek
Posts: 91
|
Re: Starting my Build
Good looking build man. hoping to start mine as soon as i get the money for parts and ect. I actually found a teksid block (whole engine actually) for 400 bucks. had a blown piston but everything is still in good shape other than that piston skirt is gone and the connecting rod is bent, but still got the forged crank, heads, 98 cobra cams, and a few other parts for cheap. How much compression are you looking to make with those flat tops? and how much boost eventually? I am looking to go the same route and want to see how it turns out for you.
__________________
Dark Shadow Gray 2003 Mach 1 -JLT CAI -Bassani xpipe and cat back -long tube headers -4.10 gears -Drilled and Slotted rotors all 4 -Nitto 555 |
05-09-2014, 06:10 PM | #78 | |
Never Satisfied
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
|
Re: Starting my Build
Quote:
Thanks man. **** good deal on that engine if you ask me. As for compression I'm thinking it should be around 10.5-10.8 with the flat tops. And i plan on pushing 11-12 lbs of boost with the P1. If the car doesnt make 600hp with P1 I'll upgrade to the D1.
__________________
P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon. |
|
05-09-2014, 06:32 PM | #79 |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: Starting my Build
I gotta feeling with that HP number you are looking at, upgrade to D1 and be done with it, that is really pushing a P1 isn't it?? (I have been wrong in the past, present AND future!!)
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
05-09-2014, 09:31 PM | #80 |
Registered User
Join Date: Sep 2012
Location: Queen Creek
Posts: 91
|
Re: Starting my Build
Yea, i didnt have the money to spend but as soon as he said 400 i figured food wasnt necessary for a while. haha. So only 10.5:1? did you have the block decked? or the heads decked? cause if you did your looking at a bit more. i was thinking of doing that but getting the heads mildly ported so it would be about 11:1 or so. not sure how much hp i wanna make yet. im still thinking about selling a crank and a set of heads to buy a stroker kit....
__________________
Dark Shadow Gray 2003 Mach 1 -JLT CAI -Bassani xpipe and cat back -long tube headers -4.10 gears -Drilled and Slotted rotors all 4 -Nitto 555 |
05-12-2014, 07:25 PM | #81 |
Never Satisfied
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
|
Re: Starting my Build
Ive seen a couple guys push their P1 to 13psi before. And ya 600hp with a P1 sounds d@mn near impossible but I'm hoping the E-85 and the High compression will get me there
__________________
P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon. |
05-13-2014, 04:58 PM | #82 |
Registered User
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
|
Re: Starting my Build
Lmk when its done and you head to the track so I can check it out bro.
__________________
**SOLD**04' Mach 1 -Comp Cams 106100's (deg 106/110) -Eatonswap with 3.4 Pulley -Full Exhaust (mac lts & xpipe, sss terminator c/b) -Built Rear w/ 3.55 gears [B]-Tuned by Lethal Performance of San Antonio -510hp/478tq |
05-14-2014, 06:05 PM | #83 |
Never Satisfied
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
|
Re: Starting my Build
Will do bro. I'm getting ready to pull the old motor out. Should have it out by next week.
__________________
P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon. |
05-14-2014, 08:07 PM | #84 |
Registered User
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
|
Re: Starting my Build
Cool. U know I sold the mach right? Hopefully my coupe will be ready
__________________
**SOLD**04' Mach 1 -Comp Cams 106100's (deg 106/110) -Eatonswap with 3.4 Pulley -Full Exhaust (mac lts & xpipe, sss terminator c/b) -Built Rear w/ 3.55 gears [B]-Tuned by Lethal Performance of San Antonio -510hp/478tq |
05-14-2014, 09:13 PM | #85 |
Never Satisfied
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
|
Re: Starting my Build
Whaaaaaaaat! How could you...lol
That's what's up. You sold it to a friend or a random buyer?
__________________
P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon. |
05-14-2014, 09:26 PM | #86 | |
Registered User
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
|
Re: Starting my Build
Quote:
Lol yea he lives in SA. I got me a 2013 FX2 Ecoboost. 87 coupe is almost done, 347 stroker and slighty modded :-)
__________________
**SOLD**04' Mach 1 -Comp Cams 106100's (deg 106/110) -Eatonswap with 3.4 Pulley -Full Exhaust (mac lts & xpipe, sss terminator c/b) -Built Rear w/ 3.55 gears [B]-Tuned by Lethal Performance of San Antonio -510hp/478tq |
|
05-14-2014, 10:53 PM | #87 |
Can't be bridled
Join Date: Sep 2007
Location: Texas
Posts: 7,006
|
Re: Starting my Build
__________________
2004 Mach 1 #6956 5spd w/IUP Eaton swap, longtubes, built 3.73 SRA 452hp/409tq dynojet🏁 |
05-14-2014, 10:54 PM | #88 |
Can't be bridled
Join Date: Sep 2007
Location: Texas
Posts: 7,006
|
Re: Starting my Build
Details or pics of said 347 car?
__________________
2004 Mach 1 #6956 5spd w/IUP Eaton swap, longtubes, built 3.73 SRA 452hp/409tq dynojet🏁 |
05-15-2014, 04:59 PM | #89 |
Never Satisfied
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
|
Re: Starting my Build
Let's see some pics of the coupe.....
__________________
P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon. |
05-15-2014, 11:57 PM | #90 |
Registered User
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
|
Re: Starting my Build
[QUOTE=311-420;1581380]Details or pics of said 347
87 coupe black. New black carpet,new headlights,93 seats, aeromotive fuel pump, 347 stroker, afr 185 heads,edelbrock rpm intake and ported to match heads, 75mm throttle body,comp rockers, eagle rods, eagle crank, Bbk long tubes with xpipe,borla catback, ford racing 30 pound injectors, c&l 75mm mass air Cali for 30's, 410 gears, pro 5.0 shifter stock t5 with cobra clutch, ford racing 9mm wires, msd digital 6, with hvc coil, cervini 4 inch cowl. Ac and heater work flawless. I have it at a buddys shop, he's gonna put on a few more things. New weather stripping, 3.73 gears, speedo gear, little things to make it perfect. Its a 1 owner car, no rust and straightest body I've seen for this year of car. Once I get it back, ill detail it and post pics. Sold the mach a little over 2 months ago.
__________________
**SOLD**04' Mach 1 -Comp Cams 106100's (deg 106/110) -Eatonswap with 3.4 Pulley -Full Exhaust (mac lts & xpipe, sss terminator c/b) -Built Rear w/ 3.55 gears [B]-Tuned by Lethal Performance of San Antonio -510hp/478tq |
05-16-2014, 08:00 PM | #91 |
Can't be bridled
Join Date: Sep 2007
Location: Texas
Posts: 7,006
|
Re: Starting my Build
Looking forward to pics! Sounds like a solid setup. Good call going to 3.73s.
__________________
2004 Mach 1 #6956 5spd w/IUP Eaton swap, longtubes, built 3.73 SRA 452hp/409tq dynojet🏁 |
05-16-2014, 10:22 PM | #92 |
Never Satisfied
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
|
Re: Starting my Build
Sounds like a good low 11 second setup. Maybe 9s with some juice. My bro in law is doing a identical setup as yours with his coupe. Except he's doing a 200 shot.
Post some pics or text me some.
__________________
P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon. |
05-17-2014, 08:20 AM | #93 |
Registered User
Join Date: Jan 2008
Location: Kyle, Texas
Posts: 2,285
|
Re: Starting my Build
Thanks guys. This motor has gone 11.30's @ 122 with a 1.66 60' so its got some tweeking left in it.
__________________
**SOLD**04' Mach 1 -Comp Cams 106100's (deg 106/110) -Eatonswap with 3.4 Pulley -Full Exhaust (mac lts & xpipe, sss terminator c/b) -Built Rear w/ 3.55 gears [B]-Tuned by Lethal Performance of San Antonio -510hp/478tq |
05-24-2014, 04:41 PM | #94 |
Never Satisfied
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
|
Re: Starting my Build
After doing some reading I'll be switching to a 3 bolt timing cover. My CF hydro dipped timing cover will be for sale soon if anyone is interested.
__________________
P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon. |
05-24-2014, 04:59 PM | #95 |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: Starting my Build
Has someone been following DSG's issue with belt slip and the Thumper?? I enjoy reading the updates, coming together well.
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
05-24-2014, 05:36 PM | #96 |
Never Satisfied
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
|
Re: Starting my Build
Yeah lol. I've read a few other threads over on Svt too. Seems like some people are really having problems with the single bolt tensioner. I'll be selling my Thump tensioner soon also.
__________________
P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon. |
05-26-2014, 09:31 PM | #97 |
Never Satisfied
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
|
Re: Starting my Build
Quick question guys. Do I need a different procharger bracket for the 3 bolt timing cover?
__________________
P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon. |
07-20-2014, 04:38 PM | #98 |
Never Satisfied
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
|
Re: Starting my Build
Update:
Sent the top end to the builder on Thursday. Switched to a 3 bolt timing cover. Coated top of pistons. New EMP water pump. Also bought some unecessary parts. Carbon fiber radiator cover & 17in RaceStars.
__________________
P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon. |
07-23-2014, 05:31 PM | #99 |
Mach-T
Join Date: Jun 2004
Location: DFW
Posts: 2,865
|
Re: Starting my Build
What is an EMP water pump? (I may be missing the obvious here)
__________________
Darrell Black '04 Mach 1 Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67 (100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88 New build - 750rwhp; not track tested (yet) Mods: Build Log Paint&Body Tuned by Manny @ HPP |
07-23-2014, 05:50 PM | #100 |
Never Satisfied
Join Date: Sep 2007
Location: San Antonio, TX
Posts: 1,134
|
Re: Starting my Build
It's a Stewart Components water pump. http://m.summitracing.com/parts/emp-ste50046s nothing special really.
__________________
P1 8psi @ 6k PA Transmission DD 3,600 Stall BBK LT's w/ 3in Collector Custom 3in X-Pipe Custom 3in CB w/ Pypes 3in M-80's Built Rear w/ 4:10 415/383 PB 11.80, @ 119 with a 1.71 60ft Tuned by http://www.southtexasperformance.com/ Built WAP Block, 10.5:1 compression, 14psi, E-85 Coming soon. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|