|
05-16-2009, 01:38 PM | #627 |
Mach1Member
Join Date: May 2009
Location: Tulsa, OK
Posts: 35
|
Re: The Wheel Pictures Thread
I LOVE the magnum 500s. I think i found them but i thought i would ask if they can be gotten for cheaper.
http://cruizinconceptswholesale.com/...REDMAGNUMNITTO |
05-16-2009, 10:50 PM | #628 |
Registered User
Join Date: Mar 2004
Posts: 25
|
Re: The Wheel Pictures Thread
This would be boring site if we all got the same rims and the same size!!
|
05-16-2009, 10:55 PM | #629 |
Mustang owner since 1984
Join Date: Sep 2003
Location: Buffalo, NY
Posts: 4,515
|
Re: The Wheel Pictures Thread
True..
__________________
2012 Kona Blue Metallic BOSS MOMS Racing... 11.92@115.43 stock besides drag radials http://www.dragzine.com/news/moms-ra...2013-schedule/ |
05-17-2009, 03:24 AM | #630 |
Eaton swapped User
Join Date: Dec 2005
Location: Austin, TX
Posts: 771
|
Re: The Wheel Pictures Thread
Would look a lot better without the lift kit on it...
|
05-17-2009, 09:17 AM | #631 |
Registered User
Join Date: Mar 2004
Posts: 25
|
Re: The Wheel Pictures Thread
I was thinking it would look good lowered about an inch or two!
Last edited by Hoov; 05-18-2009 at 02:15 AM. Reason: edit |
05-17-2009, 06:32 PM | #632 |
Registered User
Join Date: Jan 2009
Location: Elizabethtown, KY
Posts: 115
|
Re: The Wheel Pictures Thread
68' hot wheels
|
05-21-2009, 11:27 PM | #633 |
Registered User
Join Date: May 2009
Location: Loxahatchee, Florida
Posts: 556
|
Re: The Wheel Pictures Thread
Last edited by RedRocket; 05-25-2009 at 10:21 PM. |
05-22-2009, 02:15 PM | #634 | |
Guest
Join Date: Aug 2006
Location: Tampa, Florida
Posts: 18
|
Re: The Wheel Pictures Thread
Quote:
http://viewmorepics.myspace.com/inde...lbumId=1567101 |
|
05-22-2009, 03:26 PM | #635 | |
Registered User
Join Date: Mar 2006
Location: Owensboro, Ky
Posts: 627
|
Re: The Wheel Pictures Thread
Quote:
__________________
Service manager at Speedys Dyno in Owensboro, Ky. Its got a few mods....... bbk longtubes 31 spline conversion w/ 4:30's 150 shot of da juice sct tune roys spacer and an egr delete JLT kit Strange adj. shocks and struts Drag Launch springs 15x8 Racestar rear/ 17x4.5 Racestar front |
|
05-22-2009, 04:03 PM | #636 |
Guest
Join Date: Aug 2006
Location: Tampa, Florida
Posts: 18
|
Re: The Wheel Pictures Thread
Im a much bigger fan of the color combination than the wheel itself. Just imagine that AB mach w/DD FR500's in the same color scheme.
|
05-22-2009, 05:53 PM | #637 |
Registered User
Join Date: Mar 2006
Location: Owensboro, Ky
Posts: 627
|
Re: The Wheel Pictures Thread
Yeah mayb.....
__________________
Service manager at Speedys Dyno in Owensboro, Ky. Its got a few mods....... bbk longtubes 31 spline conversion w/ 4:30's 150 shot of da juice sct tune roys spacer and an egr delete JLT kit Strange adj. shocks and struts Drag Launch springs 15x8 Racestar rear/ 17x4.5 Racestar front |
06-08-2009, 03:52 PM | #638 |
Registered User
Join Date: Jun 2009
Location: Concord, CA
Posts: 32
|
Re: The Wheel Pictures Thread
New to the forums, thought i should join in on the fun here.
18" Black Saleens on my DSG. |
06-08-2009, 03:58 PM | #639 |
Registered User
Join Date: May 2008
Location: Greensboro, NC
Posts: 1,117
|
Re: The Wheel Pictures Thread
My plan is to put 18 in. fr500's on my AB mach but paint them all flat black like the stripes and spoiler/shaker. I imagine it will look really good but we'll see...
__________________
1999 Cobra Vert Built and Novi Blown :rockon: 03 Black Mach- Sold 00 Lightning- Sold 03 AB Mach- Sold |
06-11-2009, 06:23 PM | #640 |
A NITEMARE IN MASS
Join Date: May 2009
Location: Ashburnham, Ma
Posts: 3,160
|
Re: The Wheel Pictures Thread
I just put these wheels on today. What do yoiu think, the GT is looking more like a Mach every day.
|
06-12-2009, 01:54 AM | #641 |
saving pennies
Join Date: Apr 2008
Location: Griffin, Ga
Posts: 1,487
|
Re: The Wheel Pictures Thread
More pics?? I've been thinking about those wheels for my car too. They look so mean.
__________________
03 Mach 1--Auto, 4000 stall, 96 cobra intake cams, 4.10s, ARH L/T's, off road X, Moser 31 spline axles, Eaton Posi diff., MM FLSFC, Tokico D-Specs, k&n filter, 17x9/10.5s AFS Mac wheels 03 Cobra--18x9/10.5 TSW Nurburgring Wheels, Nitto NT05's 275/295, Stiegemeier ported, 2.87” pulley, Canton 9-qt oil pan, Spec Stage II clutch, MM coilovers, Bilstein Shocks/Struts, LFP heat exchanger, LFP radiator, Evans cooling system, 14" Brembo 4 Piston calipers, 470whp, 460ft-lbs |
06-12-2009, 01:55 AM | #642 | |
saving pennies
Join Date: Apr 2008
Location: Griffin, Ga
Posts: 1,487
|
Re: The Wheel Pictures Thread
Quote:
Then you could be even more like a Mach.
__________________
03 Mach 1--Auto, 4000 stall, 96 cobra intake cams, 4.10s, ARH L/T's, off road X, Moser 31 spline axles, Eaton Posi diff., MM FLSFC, Tokico D-Specs, k&n filter, 17x9/10.5s AFS Mac wheels 03 Cobra--18x9/10.5 TSW Nurburgring Wheels, Nitto NT05's 275/295, Stiegemeier ported, 2.87” pulley, Canton 9-qt oil pan, Spec Stage II clutch, MM coilovers, Bilstein Shocks/Struts, LFP heat exchanger, LFP radiator, Evans cooling system, 14" Brembo 4 Piston calipers, 470whp, 460ft-lbs |
|
06-12-2009, 02:02 AM | #643 |
My First Mach, Jan. 1969
Join Date: Jan 2005
Location: Tacoma, Washington
Posts: 13,070
|
Re: The Wheel Pictures Thread
__________________
I couldn't repair your brakes, so I made your horn louder. Mach 1 owner since January 1969. First ride in a P51D August 28,2010. Member Based in Kent, Washington, Pacific Cascade Mustang Club is the only original Mustang club in the Puget Sound Area and according to Mustang Club of America, we are the oldest in the nation. |
06-12-2009, 09:53 PM | #644 | |
Registered User
Join Date: Jun 2008
Location: Maumee, Ohio
Posts: 424
|
Re: The Wheel Pictures Thread
Quote:
Looks Great
__________________
Catback only......12.9 @ 106 w/ 1.8 60ft P1SC 435whp 407torque---11.90 @ 119 CRT-Performance Tuned (Norwalk, Ohio) |
|
06-12-2009, 09:59 PM | #645 |
03 Mach
Join Date: Jan 2009
Location: Savannah, GA
Posts: 1,396
|
Re: The Wheel Pictures Thread
Heres a few of mine, there 18's and the car has been dropped about 1 1/2"
__________________
-03 AB Mach 5spd Accufab TB, BBK LT's, BBK O/R X, Mac Catback, JLT RAI, 98 Cobra intake cams, EBC redstuff pads, slotted drilled rotors, 31 spline mosers, 31 spline cobra posi, 3" studs, FRPP 3:73, welded tubes, smoked tails. Eaton swap! 465hp,425tq @ 15deg and 3.4pulley @ 10lb. T56 magnum! - Tuned by Eric Brooks! Built motor coming soon -95 Chevy C1500 5.7 auto Stock, tow rig and DD. -Joey |
06-12-2009, 10:42 PM | #646 |
Registered User
Join Date: Feb 2009
Location: San Diego, CA
Posts: 60
|
Re: The Wheel Pictures Thread
I scored a deal, I traded the stock Mach wheels/tires for these
17x9 front and 18x10 rear, not the size combo I would have picked but for a trade it was too good to pass up! I know it looks like many of the other cars on here but I am very happy with it. |
06-14-2009, 08:49 PM | #647 |
Registered User
Join Date: Sep 2007
Location: Kokomo, IN
Posts: 80
|
Re: The Wheel Pictures Thread
Hooked my Mach 1 up with some new wheels / tires....let me know what you think:
(Front) 17x9 w/ 275/40 (Rear) 17x10.5 315/35
__________________
TheMachness 2004 Oxford White Mach 1 Modifications Flowmaster Mufflers JLT RAI Steeda Tri-Ax Short-Throw Shifter http://i24.photobucket.com/albums/c4...evette/124.jpg |
06-14-2009, 08:54 PM | #648 |
My First Mach, Jan. 1969
Join Date: Jan 2005
Location: Tacoma, Washington
Posts: 13,070
|
Re: The Wheel Pictures Thread
Sweet
__________________
I couldn't repair your brakes, so I made your horn louder. Mach 1 owner since January 1969. First ride in a P51D August 28,2010. Member Based in Kent, Washington, Pacific Cascade Mustang Club is the only original Mustang club in the Puget Sound Area and according to Mustang Club of America, we are the oldest in the nation. |
06-14-2009, 08:57 PM | #649 |
Parked again...
Join Date: Jul 2006
Location: Pensacola, Florida
Posts: 2,041
|
Re: The Wheel Pictures Thread
Very nice. Same sie tire I have in the front, yet yours look more "beefy". Hmm... Maybe it's my drop making it look smaller or something.
__________________
Sold but not forgotten... 2004 Torch Red Mach 1 IUP / 5-Speed Mach #238576 Modifications | Borla Stinger's | Painted C&L Intake | 15% Tint | Powdercoated Valve Covers | '01 Cobra Tails | '04 Cobra Mirrors | '01 Cobra Bumper | '01 Bullitt Skirts | FR500 Steering Wheel | MGW Shifter | 3/8" Spacer | IAC Restrictor | 17x9/10.5 Mach's | 275/315 Vredestein's | MM Subframe Connectors | Tokico D-Spec's | MM 4-Bolt C/C Plates | H&R Super Sport's | Build Number | #6935 of 7182 |
06-15-2009, 01:52 PM | #650 |
A NITEMARE IN MASS
Join Date: May 2009
Location: Ashburnham, Ma
Posts: 3,160
|
Re: The Wheel Pictures Thread
Love the black bullets on a white Mach. :THUMBSUP:
|
Currently Active Users Viewing This Thread: 74 (0 members and 74 guests) | |
|
|