Comp Cams Stage 3 Installed - Page 2 - 2003-04 Mach 1 Registry Owners Club

04azuremach · 02-07-2006, 12:11 AM

Quote:

Originally Posted by kerleyfries

i got the cams from jdm engineering. jim jr's friend bought them for his 01 cobra and then sold the car. i got the cams for 850 bucks. i couldnt pass them up and yes comp does make stage three cams. i think im in love with them. i just raised the rev limit to 8k just to see what she would pull. so far it stops pulling at 7400 rpms. i think its cause i have the stock intake still on her. i think she will get another 3-400 rpms with ported intake. the internals that im using are rated at 8000 rpms and 900hp. so i think it can take the abuse. i tell ya what though it sure is fun seeing the tach go all the way past 7k. i just lmao everytime i get on it. as far as the cams specs are: duration @ 50 = in. 242 ex. 240, lift = in. 475 ex. 450 and the lobe sep is @ 114. the duration is huge and the lobe sep is quite large as well. they are very close to the crower cams as far as specs go. but i couldnt get this price anywhere. im sure you can't blame me for it..

Those are the same cams being installed in my application as well. I CAN'T wait to hear what your car sounds like!! Post it up asap!!

corysmach1 · 02-07-2006, 12:51 AM

Man.... I want cams, casnt wait to see ur dyno numbers and track numbers man goodluck.

JeromeMach1 · 02-07-2006, 01:18 AM

Yes I have cats.

Jerome

darkshadow mach · 02-07-2006, 07:15 PM

kerley, are these the cams you have? Also, what internals do you have?
cams

kerleyfries · 02-07-2006, 11:35 PM

look at my sig to find my internals.... and im still trying to post the file on putfile. it just wont take my vid. i must be dumb or something!!!

darkshadow mach · 02-08-2006, 12:11 AM

Quote:

Originally Posted by kerleyfries

look at my sig to find my internals....

how much did they set you back?

loathe · 02-08-2006, 11:24 AM

notify us machers when you have a video clip available

very interested in seeing it

04azuremach · 02-12-2006, 04:13 PM

Quote:

Originally Posted by kerleyfries

look at my sig to find my internals.... and im still trying to post the file on putfile. it just wont take my vid. i must be dumb or something!!!

E-mail it to me!
robby.braddock@ai-engsvcs.com

xMach · 02-12-2006, 05:04 PM

are the cams still for sale?

kerleyfries · 02-13-2006, 12:27 AM

yes they are... just message me... putfile and streetfire will not cooperate with me for the video upload. and 04azure i tried to email it to you but my page expires before i can attach it. i hate computers!!@#$%^@#%

darkshadow mach · 02-13-2006, 02:39 AM

What kind of email are you using? I use Yahoo! and it works fine.

04azuremach · 02-13-2006, 09:55 AM

Quote:

Originally Posted by kerleyfries

yes they are... just message me... putfile and streetfire will not cooperate with me for the video upload. and 04azure i tried to email it to you but my page expires before i can attach it. i hate computers!!@#$%^@#%

Do you have Aol instant messenger? We can send it over that if we have to.. I'm sure I can find a way to get your video posted if I can just get a copy of it.

MattN03 · 02-13-2006, 01:15 PM

Quote:

Originally Posted by kerleyfries

yes they are... just message me... putfile and streetfire will not cooperate with me for the video upload. and 04azure i tried to email it to you but my page expires before i can attach it. i hate computers!!@#$%^@#%

Just upload it to www.yousendit.com. It works great

kerleyfries · 02-13-2006, 06:13 PM

http://s60.yousendit.com/d.aspx?id=2...W2Q8XTZ2QPH33D

there you have it. hope this works for ya!!

MattN03 · 02-13-2006, 06:25 PM

Quote:

Originally Posted by kerleyfries

http://s60.yousendit.com/d.aspx?id=2...W2Q8XTZ2QPH33D

there you have it. hope this works for ya!!

WOW!! To bad they didn't come like that from the factory!!

Are you going to give us some track vids later in the year?

kerleyfries · 02-13-2006, 07:27 PM

yeah ill send you all some track vids here in a about a month. i have to get my intake ported. its still bone stock. im sure that will help wake the beast up. oh and forgive me for the homemade crappy video. the car wouldnt stop surgin!!

RH04 · 02-13-2006, 10:31 PM

that sounds bad a**!

cant wait to see some track times

azureT03 · 02-13-2006, 10:35 PM

That Sounds Awesome!!!

04DSG Mach · 02-13-2006, 10:46 PM

I can't WAIT!!!! Mine will be here soon and will be installed in June, I'm so excited!!!

Machofmanhattan · 02-14-2006, 12:09 AM

did you ever sell those FR500s? if not im interested.

kerleyfries · 02-14-2006, 12:52 AM

i still have the fr500's. and thanks guys for the props. if anyone is local i will help you install them if interested.

p.s. a newer 281s just egged me on for a race. all i have to say is OUCH!!! he got his butt hurt..... we went from a second gear roll. after the car decided to hook he decided to let off. immediate yank!!!! i hate when peeps wont come up after the race and be cordial. they either do the ricer fly by or just stay way behind. hell, if i got spanked i would like to know what just raped me!! guess thats just me....

04azuremach · 02-14-2006, 12:58 PM

Car sounds freakin' sweet, man! I can't wait to hear what mine is going to sound like with a stroker.

04DSG Mach · 02-19-2006, 12:19 AM

Kerley, is there anyway you can post a link up here of the cams you bought. All I can find for 4V comp cams are:

Comp Modular Xtreme Energy Camshafts - 4V Street
Comp Modular Xtreme Energy Camshafts - 4V Race/Limited Street

Heres the link to each:
http://www.modulardepot.com/product_...roducts_id=174 - STREET
http://www.modulardepot.com/product_...roducts_id=175 - RACE

If you could help me out and let me know if either of these are the right cams or let me know the part number of the cams you got, that would be great. I'm very interested in purchasing a set. Thanks.

Tyler

darkshadow mach · 02-19-2006, 12:41 AM

Quote:

Originally Posted by kerleyfries

...as far as the cams specs are: duration @ 50 = in. 242 ex. 240, lift = in. 475 ex. 450 and the lobe sep is @ 114...

according to these specs, it should be the second link (the race one)

04DSG Mach · 02-19-2006, 12:34 PM

Quote:

Originally Posted by darkshadow mach

according to these specs, it should be the second link (the race one)

Thanks darkshawdow that makes sense now, i must have just not read that post by kerley. The second set it is!!

02-07-2006, 12:51 AM	#27
corysmach1 Guest Join Date: Feb 2004 Location: Circleville ohio Posts: 618	Re: Comp Cams Stage 3 Installed Man.... I want cams, casnt wait to see ur dyno numbers and track numbers man goodluck.

02-07-2006, 01:18 AM	#28
JeromeMach1 Registered User Join Date: Aug 2003 Location: Simi Valley, CA Posts: 1,383	Re: Comp Cams Stage 3 Installed Yes I have cats. Jerome

02-07-2006, 07:15 PM	#29
darkshadow mach one lucky guy Join Date: Apr 2005 Location: Sugar Land, TX Posts: 477	Re: Comp Cams Stage 3 Installed kerley, are these the cams you have? Also, what internals do you have? cams __________________ "Yeah, that's right... you know you're jealous."

02-07-2006, 11:35 PM	#30
kerleyfries Registered User Join Date: Nov 2003 Location: Edmond, OK Posts: 189	Re: Comp Cams Stage 3 Installed look at my sig to find my internals.... and im still trying to post the file on putfile. it just wont take my vid. i must be dumb or something!!! __________________ "WHAT I HAVE DONE" Ported Heads ---- Comp Cams stage 3 Mahle Forged 10.5 Flat Tops ---- Manley 4340 H-Beams Clevite H Series Bearings ---- 62mm Twin TB JBA 1 3/4 Mid Lengths ---- Ford Racing Carrier Bassani X Catback ---- Ford Racing 4.56's Steeda Underdrive Pulleys ---- C&L 85mm Mass Air C&L Cold Air Intake---- TKO 600 31 Spline Strange Axles---- SCT (tuned by DM)

02-08-2006, 11:24 AM	#32
loathe SHAKEN, Not Stirred! Join Date: Feb 2004 Location: Pearland, TX Posts: 1,408	Re: Comp Cams Stage 3 Installed notify us machers when you have a video clip available very interested in seeing it

02-12-2006, 05:04 PM	#34
xMach Registered User Join Date: Mar 2005 Posts: 258	Re: Comp Cams Stage 3 Installed are the cams still for sale? __________________ 2003 black mach 1 5 speed mods slp off road x pipe slp loudmouth jlt rai mgw shifter with t handle php spacer tokico 5 way adjustable in the front mm caster and camber plates mm adjustable rear control arms eibach sportline springs. yeah its kind of low. raptor shift light. too bright. frpp 410 gears at last. nx 100 shot with rwtd tune stock rear axles

02-13-2006, 12:27 AM	#35
kerleyfries Registered User Join Date: Nov 2003 Location: Edmond, OK Posts: 189	Re: Comp Cams Stage 3 Installed yes they are... just message me... putfile and streetfire will not cooperate with me for the video upload. and 04azure i tried to email it to you but my page expires before i can attach it. i hate computers!!@#$%^@#% __________________ "WHAT I HAVE DONE" Ported Heads ---- Comp Cams stage 3 Mahle Forged 10.5 Flat Tops ---- Manley 4340 H-Beams Clevite H Series Bearings ---- 62mm Twin TB JBA 1 3/4 Mid Lengths ---- Ford Racing Carrier Bassani X Catback ---- Ford Racing 4.56's Steeda Underdrive Pulleys ---- C&L 85mm Mass Air C&L Cold Air Intake---- TKO 600 31 Spline Strange Axles---- SCT (tuned by DM)

02-13-2006, 02:39 AM	#36
darkshadow mach one lucky guy Join Date: Apr 2005 Location: Sugar Land, TX Posts: 477	Re: Comp Cams Stage 3 Installed What kind of email are you using? I use Yahoo! and it works fine. __________________ "Yeah, that's right... you know you're jealous."

02-13-2006, 06:13 PM	#39
kerleyfries Registered User Join Date: Nov 2003 Location: Edmond, OK Posts: 189	Re: Comp Cams Stage 3 Installed http://s60.yousendit.com/d.aspx?id=2...W2Q8XTZ2QPH33D there you have it. hope this works for ya!! __________________ "WHAT I HAVE DONE" Ported Heads ---- Comp Cams stage 3 Mahle Forged 10.5 Flat Tops ---- Manley 4340 H-Beams Clevite H Series Bearings ---- 62mm Twin TB JBA 1 3/4 Mid Lengths ---- Ford Racing Carrier Bassani X Catback ---- Ford Racing 4.56's Steeda Underdrive Pulleys ---- C&L 85mm Mass Air C&L Cold Air Intake---- TKO 600 31 Spline Strange Axles---- SCT (tuned by DM)

02-13-2006, 07:27 PM	#41
kerleyfries Registered User Join Date: Nov 2003 Location: Edmond, OK Posts: 189	Re: Comp Cams Stage 3 Installed yeah ill send you all some track vids here in a about a month. i have to get my intake ported. its still bone stock. im sure that will help wake the beast up. oh and forgive me for the homemade crappy video. the car wouldnt stop surgin!! __________________ "WHAT I HAVE DONE" Ported Heads ---- Comp Cams stage 3 Mahle Forged 10.5 Flat Tops ---- Manley 4340 H-Beams Clevite H Series Bearings ---- 62mm Twin TB JBA 1 3/4 Mid Lengths ---- Ford Racing Carrier Bassani X Catback ---- Ford Racing 4.56's Steeda Underdrive Pulleys ---- C&L 85mm Mass Air C&L Cold Air Intake---- TKO 600 31 Spline Strange Axles---- SCT (tuned by DM)

02-13-2006, 10:31 PM	#42
RH04 Registered User Join Date: Dec 2005 Location: stl,mo Posts: 34	Re: Comp Cams Stage 3 Installed that sounds bad a**! cant wait to see some track times

02-13-2006, 10:35 PM	#43
azureT03 Formerly Comporangemach1 Join Date: Apr 2004 Location: Prospect, CT Posts: 1,794	Re: Comp Cams Stage 3 Installed That Sounds Awesome!!! __________________ 2003 Azure Blue Mach1 5 Speed IUP Built- April 11,2003 Bought- July 7,2006 Died- March 3,2007 17x8 Bullitt Rims Cooper Zeon 2XS Rubber Retro Trim Rings MGW Shifter Pauls High Performance Airbox w/ Resonator Plug 279.1rwhp 295.9rwtq

02-13-2006, 10:46 PM	#44
04DSG Mach 32 Valves!!! Join Date: Mar 2004 Location: Vienna, Virginia Posts: 780	Re: Comp Cams Stage 3 Installed I can't WAIT!!!! Mine will be here soon and will be installed in June, I'm so excited!!! __________________ 2004 DSG Mach 1- K&N and Borlas- 290 rwhp/313 rwtq 12.89 @ 110.05 mph (1.90 60' time) MODS: Power: K&N Air Filter, Bassani Ceramic Coated Mid Lengths, Bassani SS Catted X, Borla Stinger Catback, SCT Chip Suspension: Steeda Sport Springs, 315 BFGoodrich DRs Drivetrain: Pro 5.0, FRPP 4.30s Exterior: AFS 17x10.5 Mach 1 Rims Machine/Black Finish, Stock Front Rims Painted to Match, SS Inserts, Tint 35% in Front, 20% in Back Future: Alum Flywheel and DS, FR500s

02-14-2006, 12:09 AM	#45
Machofmanhattan Rex R Join Date: Sep 2004 Location: Dolores, CO Posts: 1,412	Re: Comp Cams Stage 3 Installed did you ever sell those FR500s? if not im interested. __________________ 1969 Mach 1 Q Code Fuel Injected, & Toploaded New build in progress... Gone but not Forgotten: 2008 JSB Corvette Z06 526rwhp/492rwtq (H/C/E) 2003 TR Mach 1 492rwhp/434rwtq (Procharged 8psi) 2003 AB Mach 1 438rwhp/490rwtq (100 NX Shot)

02-14-2006, 12:52 AM	#46
kerleyfries Registered User Join Date: Nov 2003 Location: Edmond, OK Posts: 189	Re: Comp Cams Stage 3 Installed i still have the fr500's. and thanks guys for the props. if anyone is local i will help you install them if interested. p.s. a newer 281s just egged me on for a race. all i have to say is OUCH!!! he got his butt hurt..... we went from a second gear roll. after the car decided to hook he decided to let off. immediate yank!!!! i hate when peeps wont come up after the race and be cordial. they either do the ricer fly by or just stay way behind. hell, if i got spanked i would like to know what just raped me!! guess thats just me.... __________________ "WHAT I HAVE DONE" Ported Heads ---- Comp Cams stage 3 Mahle Forged 10.5 Flat Tops ---- Manley 4340 H-Beams Clevite H Series Bearings ---- 62mm Twin TB JBA 1 3/4 Mid Lengths ---- Ford Racing Carrier Bassani X Catback ---- Ford Racing 4.56's Steeda Underdrive Pulleys ---- C&L 85mm Mass Air C&L Cold Air Intake---- TKO 600 31 Spline Strange Axles---- SCT (tuned by DM)

02-14-2006, 12:58 PM	#47
04azuremach Loud, fast and fun Join Date: Apr 2004 Location: Owning Ricers at MIR Posts: 7,864	Re: Comp Cams Stage 3 Installed Car sounds freakin' sweet, man! I can't wait to hear what mine is going to sound like with a stroker.

02-19-2006, 12:19 AM	#48
04DSG Mach 32 Valves!!! Join Date: Mar 2004 Location: Vienna, Virginia Posts: 780	Re: Comp Cams Stage 3 Installed Kerley, is there anyway you can post a link up here of the cams you bought. All I can find for 4V comp cams are: Comp Modular Xtreme Energy Camshafts - 4V Street Comp Modular Xtreme Energy Camshafts - 4V Race/Limited Street Heres the link to each: http://www.modulardepot.com/product_...roducts_id=174 - STREET http://www.modulardepot.com/product_...roducts_id=175 - RACE If you could help me out and let me know if either of these are the right cams or let me know the part number of the cams you got, that would be great. I'm very interested in purchasing a set. Thanks. Tyler __________________ 2004 DSG Mach 1- K&N and Borlas- 290 rwhp/313 rwtq 12.89 @ 110.05 mph (1.90 60' time) MODS: Power: K&N Air Filter, Bassani Ceramic Coated Mid Lengths, Bassani SS Catted X, Borla Stinger Catback, SCT Chip Suspension: Steeda Sport Springs, 315 BFGoodrich DRs Drivetrain: Pro 5.0, FRPP 4.30s Exterior: AFS 17x10.5 Mach 1 Rims Machine/Black Finish, Stock Front Rims Painted to Match, SS Inserts, Tint 35% in Front, 20% in Back Future: Alum Flywheel and DS, FR500s

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)