|
02-17-2010, 10:49 AM | #276 |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Custom Intake Carbureted & Nitrous Setup
I cut out a pair of cylinder head exhaust port templates to match port the Kooks headers. The Kooks come pretty close matching to a stage 3 port job.
I just need to do a small amount of flange shaping, then I'll polish all the rough inside surfaces.
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
02-20-2010, 07:11 PM | #277 |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Custom Intake Carbureted & Nitrous Setup
This is the custom built trans by Liberty Gears out of Michigan, brand new TKO/500.
Everything including the kitchen sink has been done to this unit.. Hopefully it can take an azz beating...
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
02-27-2010, 07:56 PM | #278 |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Custom Intake Carbureted & Nitrous Setup
Mock up motor fit:
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
02-27-2010, 07:59 PM | #279 |
finally paid for
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
|
Re: Custom Intake Carbureted & Nitrous Setup
man Phil...seems like 2 years has gone by...iam sure your super excited seeing it get closer
__________________
2004 mach 1-turbo build in progress.. Fast xfi 2.0 OLD combo- 826rwhp/720 trq -100 shot NX 9.13@154 on 100 shot NEW- in progress... |
02-27-2010, 08:10 PM | #280 |
All around good guy
Join Date: Feb 2005
Location: Milan, OH
Posts: 170
|
Re: Custom Intake Carbureted & Nitrous Setup
Man Phil....almost 5 hours to get that photo up. You're slippin'.
The only wires in the engine bay are those you see coiled on the master cylinder. They come out in the trans tunnel and will be hidden in the intake valley. Gonna need a pro-stock snorkel to clear that carb set up though!
__________________
[SIGPIC][/SIGPIC] Jeff Chambers FFW S/W #3 10.031@137.5 1990 Mustang GT (race car) 2001 Mustang GT (street car) CRT Performance, LLC |
02-28-2010, 12:45 PM | #281 |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Custom Intake Carbureted & Nitrous Setup
Last time I drove the Mach was Oct 2007.. That's when I decided to go this route piece by piece, payday after payday!!! I am getting excited to drive it, that's for sure!
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
02-28-2010, 12:51 PM | #282 |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Custom Intake Carbureted & Nitrous Setup
Pics:
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
03-01-2010, 06:43 PM | #283 |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Custom Intake Carbureted & Nitrous Setup
The custom stainless distributer hold down clamp that J. Chambers designed and I machined. This will give solid clamping to the MMR cam cover distributer drive design.
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
03-03-2010, 04:54 PM | #284 | |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Custom Intake Carbureted & Nitrous Setup
Quote:
Bill, Did he modify his original design too??
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
|
03-04-2010, 04:46 PM | #285 |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Custom Intake Carbureted & Nitrous Setup
Pull handle for the engine bay fire suppresion system. 5 lb AFFF extinguisher mounted under rear seat delete panel.
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
03-05-2010, 01:06 PM | #286 |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Custom Intake Carbureted & Nitrous Setup
I finished the modifications to the distributer drive and hold down clamp. I'm going to CRT Performance today to see how it fits.
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
03-05-2010, 01:12 PM | #287 |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Custom Intake Carbureted & Nitrous Setup
Finished port matching/smoothing the drivers side header.
Pic of passenger header vs the drivers header I finished. The rough porting from Kooks is pretty close to my Fox Lake Stage III exhaust ports.
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
03-05-2010, 07:32 PM | #288 |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Custom Intake Carbureted & Nitrous Setup
Pics of the distributer with custom hold down clamp. The cam sensor is retained to keep the hole pluged. A set screw with a nylon tip will still be used.
Pic of the 2 bulk heads for the nitrous & fuel solenoids on back side of shock tower.
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
03-06-2010, 09:04 AM | #289 |
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
|
Re: Custom Intake Carbureted & Nitrous Setup
Looking good Phil . Now Git-R-Done !
__________________
1331 RWHP 1296 RWTQ 28 PSI 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by DGR Racing DYNO KING |
05-18-2010, 08:46 PM | #290 |
finally paid for
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
|
Re: Custom Intake Carbureted & Nitrous Setup
^^ pics of the cage??
__________________
2004 mach 1-turbo build in progress.. Fast xfi 2.0 OLD combo- 826rwhp/720 trq -100 shot NX 9.13@154 on 100 shot NEW- in progress... |
07-04-2010, 02:32 PM | #291 |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Custom Intake Carbureted & Nitrous Setup
Pics of the 10pt cage. Stroud is making a custom fit window net for my swingout door bar.
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
07-04-2010, 02:36 PM | #292 |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Custom Intake Carbureted & Nitrous Setup
Custom Taylor 10.4 mm plug wires cut/installed. Jeff using his distributor cap to faze the distributor.
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ Last edited by Phil; 07-04-2010 at 03:15 PM. |
07-04-2010, 02:40 PM | #293 |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Custom Intake Carbureted & Nitrous Setup
Final pics of empty engine bay, flamming river manual rack and racecraft custom steering shaft. Cool can/fuel regulator.
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
07-05-2010, 10:26 AM | #294 |
finally paid for
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
|
Re: Custom Intake Carbureted & Nitrous Setup
updates looking good phil
__________________
2004 mach 1-turbo build in progress.. Fast xfi 2.0 OLD combo- 826rwhp/720 trq -100 shot NX 9.13@154 on 100 shot NEW- in progress... |
07-21-2010, 03:45 PM | #295 |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Custom Intake Carbureted & Nitrous Setup
Pic of finished deep sump/fuel pump set up.
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
07-21-2010, 06:50 PM | #296 |
Add 49ci...but why?
Join Date: Jan 2007
Location: Abilene, TX
Posts: 622
|
Re: Custom Intake Carbureted & Nitrous Setup
Lots and lots of work.
Can I ask why you decided on a 600cfm carb? IM going a route very simliar route as this, but with a MOD 6... Looks nasty. hope my car comes out this good...Congrats.
__________________
89 LX-NA 32v, 437rwhp NA 79 Coupe-Who knows 93 Typhoon-Daily 95 F350-Tow rig |
07-22-2010, 09:09 AM | #297 | |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Custom Intake Carbureted & Nitrous Setup
Quote:
Thanks! Break-in with a 650cfm double pumper and see what the dyno tests show. Probably end up with 750double pumper for WOT track runs. For the street, the 650 will probably do fine..
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ Last edited by Phil; 07-23-2010 at 10:13 AM. |
|
07-22-2010, 08:14 PM | #298 |
Add 49ci...but why?
Join Date: Jan 2007
Location: Abilene, TX
Posts: 622
|
Re: Custom Intake Carbureted & Nitrous Setup
Ah. Im looking for all out power. I have a big bore and going stroker and BB next year..so I will be starting out with a 850-950 depending on what my carb/machine shop/drag racer buddy tells me to go with...
I hope to have mine running in a few weeks...
__________________
89 LX-NA 32v, 437rwhp NA 79 Coupe-Who knows 93 Typhoon-Daily 95 F350-Tow rig |
07-23-2010, 10:16 AM | #299 |
Add 49ci...but why?
Join Date: Jan 2007
Location: Abilene, TX
Posts: 622
|
Re: Custom Intake Carbureted & Nitrous Setup
Well. Thats what I thought as well...but he has good points and good reasoning. I am listening to him as he knows what he is doing...1500hp Top Sportsman car, 3500hp Pro Mod, 1000hp Big Block boat motor...along with owning his own shop...He is no dummy when it comes to motors and cars, hell, he Crew'd for Eddie Hill back in the day...He took my advice when I built him a few Modulars for a couple customers and those turned out great, and I am going to do the same for his advice.
Now I know the 950 is pretty big...esp for my just BB...I would need more like a 750-800...and when I go BB Stroker, a 850-950 is all I really need. But his exact words..."you can't really 'over-carb' a motor', get the biggest one on there for the most flow...he did say I prob won't see ANY gains from going to a 950 from a 850...but the Holley Ultra HP I want only comes in 650-750 and 950...and I don't want to buy two carbs down the road. I see it like I see injectors. YOu really can't 'over injector' a motor either. Do I need 60s on a NA BB motor...nope...But did my car have problems and run bad with them...nope. Just need to tune it correctly for the injectors...and the way he explains it to me, just need to tune and jet the carb properly. He says with correct tuning and time spent on the carb and combo, I won't have any problems. Now...is this gospel...lol, Hell no. I know little to nothing about carbs, this is why I am just listening to him and spitting this info back out...I am completely trusting him in this area...he has never steered me wrong before...no reason NOT to trust him. We will see... Sorry to whore up your thread Phil... Keep the pics coming...
__________________
89 LX-NA 32v, 437rwhp NA 79 Coupe-Who knows 93 Typhoon-Daily 95 F350-Tow rig |
07-24-2010, 04:43 PM | #300 | |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: Custom Intake Carbureted & Nitrous Setup
Quote:
You did not whore up the thread... I'm also going to be using a 1" Wilson CNC 4 hole tapered spacer which will help the carb flow additional CFM and atomize air/fuel much better at part throttle (street), to include WOT (strip). Also, it will help increase the atomizing of the nitrous/fuel when injecting thru the ZEX perimeter plate. I still have the factory size valves/JE custom .005" over bore domed pistons 12.18:1 CR/Fox Lake Power products CNC stage III heads and went with Crower cams that will retain some low/mid range street manners, but on nitrous a whole different beast.
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|