|
03-02-2007, 04:56 PM | #1 |
Love my Mach
Join Date: Apr 2005
Location: Charlottesville, VA
Posts: 13,678
|
Part number for coolant crossover plug
Well as usual the Ford stealership can not find the part or part number for the bleeder/fill cap. Can anyone help with a ford part number for this thing??
__________________
2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt |
03-02-2007, 05:35 PM | #2 |
semi-pro moderator
Join Date: May 2004
Location: Virginia Beach
Posts: 4,955
|
Re: Part number help
you may have to get the whole cross-over tube
__________________
2004 Mach 1 IUP/5spd/DSG Engine, etc done...sits in the garage |
03-02-2007, 06:03 PM | #3 |
LuLz
Join Date: Dec 2003
Location: Cedar Park, TX
Posts: 19,294
|
Re: Part number help
I came up empty when i went to get a new 1 as well, my dealer finally found it but they showed no part # for it.
__________________
11 Sterling gray GT500 coupe 08 Silver Z06 1058rwhp/1073rwt @ 15psi 14 Silver Q50S Vortech blown 04 DSG Mach 1 (stolen) 03 OW Mach 1 (sitting in a field rotting away) |
03-02-2007, 07:57 PM | #4 |
Torque wins!
Join Date: Dec 2004
Location: Florida
Posts: 13,167
|
Re: Part number help
It IS available last I checked.
I will have to call local dealer tomorrow and see if it still is.
__________________
The ORIGINAL Project R build thread is back ! 5.4 32V NA Streetable 404/387 26.56 MPG "I don't like repeat offenders, I like DEAD offenders" Ted Nugent "A big engine hardly working is more efficient than a little engine screaming its head off" Jay Leno |
03-02-2007, 10:13 PM | #5 |
Love my Mach
Join Date: Apr 2005
Location: Charlottesville, VA
Posts: 13,678
|
Re: Part number help
Thanks.
__________________
2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt |
03-03-2007, 05:05 AM | #6 |
Registered User
Join Date: Mar 2004
Location: Acton, Ma
Posts: 190
|
Re: Part number help
Part # for cross over plug:
F3LY8A500-A None listed for the Mach 1, this fits the Mark 8 and Mach 1.. They are about 20$ Randy Stinchcomb over on Modular Depot Forums may be able to hook you up for a bit less.
__________________
2004 Mach 1 Azure Blue Automatic 12.06 1/4 7.640 1/8 1.645 60 ft 112.34 mph New England Dragway Modified # 713 Special Thanks to Mike Dez Racing and Tube Chassis Designz |
03-03-2007, 06:40 AM | #7 | |
Love my Mach
Join Date: Apr 2005
Location: Charlottesville, VA
Posts: 13,678
|
Re: Part number help
Quote:
Like I said M1R ROCKS!!!!
__________________
2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt |
|
03-03-2007, 06:58 AM | #8 |
Braderunna
Join Date: May 2004
Location: hampton, va
Posts: 4,949
|
Re: Part number help
This info needs to stay on top.
__________________
"Sparky"- 2003 Azure Blue w/MT and IUP Visit my garage on mach1mustang.org for details. |
03-03-2007, 07:49 AM | #9 | |
1/4 Mile Drags Moderator
Join Date: Aug 2003
Location: Guntersville, AL
Posts: 2,630
|
Re: Part number help
Quote:
You may also want to consider this plug if you need to hook-up an aftermarket temp gauge: More info on that part can be found HERE. |
|
03-03-2007, 08:03 AM | #10 | |
Love my Mach
Join Date: Apr 2005
Location: Charlottesville, VA
Posts: 13,678
|
Re: Part number help
Quote:
__________________
2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt |
|
03-03-2007, 08:05 AM | #11 |
1/4 Mile Drags Moderator
Join Date: Aug 2003
Location: Guntersville, AL
Posts: 2,630
|
Re: Part number help
|
03-03-2007, 08:40 AM | #12 |
finally paid for
Join Date: Nov 2004
Location: Ypsilanti Twp, Mi
Posts: 4,077
|
Re: Part number help
angus, what sensor did you go with...I have the FORD autometer one and it WONT work with the end...way to large
__________________
2004 mach 1-turbo build in progress.. Fast xfi 2.0 OLD combo- 826rwhp/720 trq -100 shot NX 9.13@154 on 100 shot NEW- in progress... |
03-03-2007, 09:48 AM | #13 |
Torque wins!
Join Date: Dec 2004
Location: Florida
Posts: 13,167
|
Re: Part number for coolant crossover plug
Well, that saved me a call.
Why not get it from Joe Charles?
__________________
The ORIGINAL Project R build thread is back ! 5.4 32V NA Streetable 404/387 26.56 MPG "I don't like repeat offenders, I like DEAD offenders" Ted Nugent "A big engine hardly working is more efficient than a little engine screaming its head off" Jay Leno |
03-04-2007, 09:19 AM | #14 | |
Registered User
Join Date: Dec 2003
Location: Summerville, SC
Posts: 456
|
Re: Part number help
Quote:
I noticed he has other parts of interset too at good prices.
__________________
Horsepower is how fast you hit the wall, Torque is how far the wall moves. ***************** '04 DSG Mach w/ IUP * * * SOLD * * * 5-9-07 ***************** Born on Date: 10/09/2003 |
|
03-04-2007, 10:49 AM | #15 |
Undocumented Member
Join Date: Feb 2004
Location: Enterprise, AL
Posts: 15,828
|
Re: Part number for coolant crossover plug
When I screwed mine up I went to my dealer expecting to order or come up empty and he said "I have two".
I bought both, used one and put the other one someplace safe. Now I wish that place I thought was so safe was easy to remember. I have the receipt with the extra plug but the parts guy didn't look it up, he just walked right to it. I have my water temp in the block drain now but if those crossover tube sender adapters are available again, I'm getting one. It's kind of hot for the wiring using the block drain.
__________________
_____________________________________________ 2003 Mach1 AB 5spd 2004 Mach1 TR 5spd (sold) 1933 Ford 3W Coupe (4.6 dohc Stack Injection) 2003 Cobra TR (sold) 2014 Mustang GT (Track Pack) in Black |
03-05-2007, 08:38 AM | #16 |
Registered User
Join Date: Mar 2007
Location: Lincoln, Kansas
Posts: 15
|
Re: Part number for coolant crossover plug
Geoffav,
Posted over on SVTperformance.com and asked if I could come over and post up some info about my temp adapter. Temp adapter I sell is priced at $20 shipped. I also build them as a standard replacement for the stock plug, these have no hole drilled/tapped for a temp sender. Same price as the tapped plug because if you ever do decide to install a temp sender ship the plug back to me and Ill drill/tap the plug for free. I accept Paypal mpp97sst@hotmail.com and Check or Money Order Anthony Dail 111 E. South St. Lincoln, Ks 67455 If you have any questions please ask here or give me a call. Thank you, Anthony Dail Midcontinent Mustangs (785)658-5921 |
03-05-2007, 12:32 PM | #17 |
Registered User
Join Date: Dec 2003
Location: Summerville, SC
Posts: 456
|
Re: Part number for coolant crossover plug
Thanks for coming over and posting.
I tried to contact you on SVTPerformance... and oh well that didn't work out to good...lol. Looks like a great product and you have had many great reviews of it over there too. There will be a paypal order today shortly.. Question first: If I order the plug tapped for the temp sensor, could I just install a std plug where the future temp sensor would go? Then replace the plug when a temp sensor is in need of being installed. Thanks again! :HOPPY:
__________________
Horsepower is how fast you hit the wall, Torque is how far the wall moves. ***************** '04 DSG Mach w/ IUP * * * SOLD * * * 5-9-07 ***************** Born on Date: 10/09/2003 |
03-06-2007, 01:06 AM | #18 | |
Undocumented Member
Join Date: Feb 2004
Location: Enterprise, AL
Posts: 15,828
|
Re: Part number for coolant crossover plug
Quote:
Welcome to the herd. I just sent a paypal to you for a temp adapter. Thanks for stopping in. :ORANGE:
__________________
_____________________________________________ 2003 Mach1 AB 5spd 2004 Mach1 TR 5spd (sold) 1933 Ford 3W Coupe (4.6 dohc Stack Injection) 2003 Cobra TR (sold) 2014 Mustang GT (Track Pack) in Black |
|
03-06-2007, 05:31 AM | #19 | |
Love my Mach
Join Date: Apr 2005
Location: Charlottesville, VA
Posts: 13,678
|
Re: Part number for coolant crossover plug
Quote:
__________________
2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt |
|
03-06-2007, 07:26 AM | #20 |
Registered User
Join Date: Dec 2003
Location: Summerville, SC
Posts: 456
|
Re: Part number for coolant crossover plug
Paypal sent too! Thanks Again!
Now to take a closer look at the brake ducting.
__________________
Horsepower is how fast you hit the wall, Torque is how far the wall moves. ***************** '04 DSG Mach w/ IUP * * * SOLD * * * 5-9-07 ***************** Born on Date: 10/09/2003 |
03-06-2007, 08:37 AM | #21 |
Registered User
Join Date: Mar 2007
Location: Lincoln, Kansas
Posts: 15
|
Re: Part number for coolant crossover plug
Thank you for your orders. I'll get started on them today and I'll post back up when they ship.
Anthony Dail Midcontinent Mustangs (785)658-5921 |
03-09-2007, 06:18 PM | #22 |
Registered User
Join Date: Mar 2007
Location: Lincoln, Kansas
Posts: 15
|
Re: Part number for coolant crossover plug
Shipped!!! All three orders went out today USPS Priority Mail. You should all get them by Monday or Tuesday at the latest.
Anthony |
03-09-2007, 07:02 PM | #23 |
Love my Mach
Join Date: Apr 2005
Location: Charlottesville, VA
Posts: 13,678
|
Re: Part number for coolant crossover plug
I got mine today!!!!!!!!!!!!!!!!!!!!!!
__________________
2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt |
03-09-2007, 08:05 PM | #24 |
Braderunna
Join Date: May 2004
Location: hampton, va
Posts: 4,949
|
Re: Part number for coolant crossover plug
Paypal sent! Thanks Anthony!
__________________
"Sparky"- 2003 Azure Blue w/MT and IUP Visit my garage on mach1mustang.org for details. |
03-09-2007, 08:08 PM | #25 |
Love my Mach
Join Date: Apr 2005
Location: Charlottesville, VA
Posts: 13,678
|
Re: Part number for coolant crossover plug
So I guess you don't want my stock plug now. If not I am taking outside and beating the crap out of it with a hammer.
Did you get the tapped or untapped version? It is a high quality peice.
__________________
2003 slowmatic 11.105@117mph w/125 shot of Nitrous best to date Kooks LTsw/OR X, elect cutouts, JLT RAI w/C&L 85 MAH,1" Spacer,PP Lower intake,Accufab TB,160 T-stat,EF Cooling Mod,NX Kit,Mez Electric Water pump,SLP Linelock,FRPP 4.10s-Alum Dif Cover-Alum Driveshaft & SL, Steeda Bumpsteer,MM Alum rack bushings,Deep Alum Tranny pan,Predator,Steeda AUCAs,MM ALCAs, Dspecs,MM CC plates & FLSFCs,MRT Guage cluster,AEM WB,MRT hood struts,Seq TLs, carbon fiber hood/trunk/Cobra wing,220 amp alt |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|