Will 335's fit on our car? - 2003-04 Mach 1 Registry Owners Club

BONESTOCK · 11-10-2005, 10:54 AM

Will I be able to fit a 335/35/17 Goodyear Eagle GS-A on a 10.5" wheel and on my car?

Anyone do it and have pics?

Koz-04Mach · 11-10-2005, 11:34 AM

I dont think thats a safe fit on a 10.5" rim. Think you need a 17x11 -17x12? Even with a good offset wheel your gonna have some tire sticking out of the fender unless you flare them out a bit.

Koz-04Mach · 11-10-2005, 11:58 AM

Its been so long since I sold wheels and tires it might actually require a 17x13" wheel for a safe fit. I think the 10.5 are best for 285/295, 11.5 for 315's and 12-13 for a 335. But dont quote me on that like I said its been a while.

LTZ MACH · 11-10-2005, 03:25 PM

I am by no means an expert in this but I think it will work but not on a 10.5 rim. My 315s still have room and was even wondering myself if a 335 would fit, but I think you are going to need 11 in rim or bigger. Let us know if you try it.

LT

BONESTOCK · 11-10-2005, 08:24 PM

Quote:

Originally Posted by RioRed4v

remove quad shock, and do a bit of pouding on the inner fender.

got em to fit on my old 17x10.5 03. i had the 335/30 Michelin Pilots.

some pics of the mvthafvckin steamrollers :word:

next to a Nitto DR 315

Here's a quote from RioRed over at MW.
Seems he had no problem on a 10.5 rim. I'm not going to be driving hard on these anyway. Just cruisin around. I'll try it and see how it goes!!

SFMach1 · 11-11-2005, 04:46 AM

check out www.svtperformance.com and do a search there... i'm sure you will find more pics.

Blk2k4Mach · 11-11-2005, 09:04 AM

Quote:

Originally Posted by BONESTOCK

Here's a quote from RioRed over at MW.
Seems he had no problem on a 10.5 rim. I'm not going to be driving hard on these anyway. Just cruisin around. I'll try it and see how it goes!!

Man those b*tches are SWEET!

Bullitt4711 · 12-05-2005, 03:47 PM

I ran Michelin Pilot Sport 335/30/18's no problem on my 01 Bullitt which is lowere 3/4" versus the Mach1's 1/2". It can be done. And I was running 18x10. There was a slight bulge, but I liked it.

~Colby

NUMACHI · 09-23-2006, 02:12 PM

OLD THREAD ALERT!!

Anyways, how did this work out?? Did the tires fit without any issues?? Also, how well do these Michelin Pilots hook up on the street and strip??

SeeingRed · 09-23-2006, 02:34 PM

Quote:

Originally Posted by BONESTOCK

Here's a quote from RioRed over at MW.
Seems he had no problem on a 10.5 rim. I'm not going to be driving hard on these anyway. Just cruisin around. I'll try it and see how it goes!!

I think it looks horrible, but that's just me.

badboy · 03-03-2007, 09:49 AM

I want 335 on mine BAD

BONESTOCK · 03-03-2007, 04:33 PM

Wow old thread. Anyways here's a pic of them on mine. These are GoodYear Eagle 335/35/17's. They don't hook for crap.

Well...I just ordered a pair of BF Drag radials in 315/35/17's so that'll be a greater inprovement in traction!

2k4mach · 03-03-2007, 04:43 PM

too much bulge for my liking........

badboy · 03-03-2007, 11:40 PM

Hey Bone stock nice car,Those 335 look great,When my 315 wear out I'am putting 335 on.

BONESTOCK · 03-04-2007, 02:09 AM

Quote:

Originally Posted by badboy

Hey Bone stock nice car,Those 335 look great,When my 315 wear out I'am putting 335 on.

Thanks! Yeah people always mention how they look like steamrollers back there! Very intimidating to people coming up from behind on the highway.

badboy · 03-04-2007, 11:36 PM

Hey bonestock what did you do to the gas tank to make it look so good?

BONESTOCK · 03-05-2007, 03:27 PM

Quote:

Originally Posted by badboy

Hey bonestock what did you do to the gas tank to make it look so good?

huh? I think I'm missing something. Unless your talking about it looking larger because the real wheels are gigantor.

Basically you can just wave your hand over my head as that's where that went. haha

jv7 · 04-13-2007, 09:12 PM

So can the 335/35's be mounted without removing the quadshock? Or any "pounding"?

Derek · 04-14-2007, 01:04 AM

I just put on 315-30-18 mich pilot sports and could say the 335's would fit without removing the quad shock. but with 4.30's traction is still an issue I'd go with a drag radial if you live somewhere where it doesnt snow in april (like ohio) luckily I have 26x11.50x16 et streets for the track so i wont have a problem hooking there.

Devery · 04-14-2007, 04:18 AM

Check out the latest Modified Mustangs magazine. There is a White MACh 1 pushing close to 700hp with 11s and some 335s if my memory serves me right. It's definitely badd!

BONESTOCK · 04-14-2007, 06:49 PM

I now have BF Goodrich Drag Radials. 315/35/17's. They seem to be just as wide as the 335's. haha

ScreaminMachOne · 04-15-2007, 07:55 PM

bonestock you lower your car

BONESTOCK · 04-15-2007, 10:01 PM

Quote:

Originally Posted by ScreaminMachOne

bonestock you lower your car

I did. It has Eibach drag launch springs. 1 1/4 coils cut in the front.

The back is so high because of the spring perch washers/spacers installed so I can run the 28" slicks. To much work to remove them.

ScreaminMachOne · 04-15-2007, 10:34 PM

Wonder if I should try the drag lauch springs

BONESTOCK · 04-15-2007, 11:17 PM

Quote:

Originally Posted by ScreaminMachOne

Wonder if I should try the drag lauch springs

Oh...I see that your running 321/348 for power. I was making 294/316 when I went that 12.1!

11-10-2005, 10:54 AM	#1
BONESTOCK Registered User Join Date: Jul 2004 Location: MA Posts: 1,685	Will 335's fit on our car? Will I be able to fit a 335/35/17 Goodyear Eagle GS-A on a 10.5" wheel and on my car? Anyone do it and have pics? __________________ 2004 Torch Red Mach 1 born on 03/26/04purchased on 07/14/04 465rwhp 409rwtq Let's go for a ride in my car! Procharged Dyno vid!

11-10-2005, 11:34 AM	#2
Koz-04Mach KLR - BEE Join Date: Apr 2004 Location: TX Posts: 354	Re: Will 335's fit on our car? I dont think thats a safe fit on a 10.5" rim. Think you need a 17x11 -17x12? Even with a good offset wheel your gonna have some tire sticking out of the fender unless you flare them out a bit. __________________ 04 Screaming Yellow Mach1 IUP BOD - Feb 17, 2004 5 Speed Sold - June 11, 2006

11-10-2005, 11:58 AM	#3
Koz-04Mach KLR - BEE Join Date: Apr 2004 Location: TX Posts: 354	Re: Will 335's fit on our car? Its been so long since I sold wheels and tires it might actually require a 17x13" wheel for a safe fit. I think the 10.5 are best for 285/295, 11.5 for 315's and 12-13 for a 335. But dont quote me on that like I said its been a while. __________________ 04 Screaming Yellow Mach1 IUP BOD - Feb 17, 2004 5 Speed Sold - June 11, 2006

11-10-2005, 03:25 PM	#4
LTZ MACH Mach 1 Stud Join Date: Nov 2002 Location: SE Indianapolis Posts: 975	Re: Will 335's fit on our car? I am by no means an expert in this but I think it will work but not on a 10.5 rim. My 315s still have room and was even wondering myself if a 335 would fit, but I think you are going to need 11 in rim or bigger. Let us know if you try it. LT __________________ 2004 Mustang Cobra -- Screaming Yellow -- 6-speed -- KB 2.4 2003 Mustang Mach 1 -- Azure Blue -- 5-speed 1998 Mustang Cobra Convertible -- Triple Black -- SOLD

11-11-2005, 04:46 AM	#6
SFMach1 Socom Shooter Join Date: May 2004 Location: CA Posts: 418	Re: Will 335's fit on our car? check out www.svtperformance.com and do a search there... i'm sure you will find more pics. __________________ '04 DSG Mach 1, 5-speed my mach 1 web page

12-05-2005, 03:47 PM	#8
Bullitt4711 Ein Schuß, Ein Töten Join Date: Mar 2003 Location: 4S Ranch, San Diego CA Posts: 218	Re: Will 335's fit on our car? I ran Michelin Pilot Sport 335/30/18's no problem on my 01 Bullitt which is lowere 3/4" versus the Mach1's 1/2". It can be done. And I was running 18x10. There was a slight bulge, but I liked it. ~Colby Attached Thumbnails __________________ This is the old ride... http://www.imboc.com/Uploads/2161-1096090075.jpg

09-23-2006, 02:12 PM	#9
NUMACHI R CODE Join Date: Mar 2004 Location: Hagerstown, Maryland Posts: 939	Re: Will 335's fit on our car? OLD THREAD ALERT!! Anyways, how did this work out?? Did the tires fit without any issues?? Also, how well do these Michelin Pilots hook up on the street and strip?? __________________ 2003 Azure Blue Mach 5 Speed, IUP - - - - - - - - - - - - - - - - - - - - ALMOST STOCK

03-03-2007, 09:49 AM	#11
badboy Registered User Join Date: Aug 2005 Location: central Texas Posts: 19	Re: Will 335's fit on our car? I want 335 on mine BAD

03-03-2007, 04:33 PM	#12
BONESTOCK Registered User Join Date: Jul 2004 Location: MA Posts: 1,685	Re: Will 335's fit on our car? Wow old thread. Anyways here's a pic of them on mine. These are GoodYear Eagle 335/35/17's. They don't hook for crap. Well...I just ordered a pair of BF Drag radials in 315/35/17's so that'll be a greater inprovement in traction! __________________ 2004 Torch Red Mach 1 born on 03/26/04purchased on 07/14/04 465rwhp 409rwtq Let's go for a ride in my car! Procharged Dyno vid!

03-03-2007, 04:43 PM	#13
2k4mach PSR Mafia Join Date: Dec 2003 Location: New Braunsfuls, TX Posts: 16,945	Re: Will 335's fit on our car? too much bulge for my liking........ __________________ No venti is twenty... yeah. Large is large. In fact tall is large and grande is Spanish for large. Venti is the only one that doesn't mean large. It's also the only one that's italian. Congratulations you're stupid in three languages.

03-03-2007, 11:40 PM	#14
badboy Registered User Join Date: Aug 2005 Location: central Texas Posts: 19	Re: Will 335's fit on our car? Hey Bone stock nice car,Those 335 look great,When my 315 wear out I'am putting 335 on.

03-04-2007, 11:36 PM	#16
badboy Registered User Join Date: Aug 2005 Location: central Texas Posts: 19	Re: Will 335's fit on our car? Hey bonestock what did you do to the gas tank to make it look so good?

04-13-2007, 09:12 PM	#18
jv7 Registered User Join Date: Jan 2004 Location: Round Rock, TX Posts: 678	Re: Will 335's fit on our car? So can the 335/35's be mounted without removing the quadshock? Or any "pounding"?

04-14-2007, 01:04 AM	#19
Derek Registered User Join Date: Feb 2007 Location: columbus, ohio Posts: 254	Re: Will 335's fit on our car? I just put on 315-30-18 mich pilot sports and could say the 335's would fit without removing the quad shock. but with 4.30's traction is still an issue I'd go with a drag radial if you live somewhere where it doesnt snow in april (like ohio) luckily I have 26x11.50x16 et streets for the track so i wont have a problem hooking there.

04-14-2007, 04:18 AM	#20
Devery Registered User Join Date: Sep 2003 Location: Cabot, Arkansas Posts: 539	Re: Will 335's fit on our car? Check out the latest Modified Mustangs magazine. There is a White MACh 1 pushing close to 700hp with 11s and some 335s if my memory serves me right. It's definitely badd! __________________ *2003 Oxford White 5 Speed MACh 1* - 15% Window Tint - MGW Silver Radio, A/C Knobs - MRT Interceptor Guages - Black Antenna (Trimmed Down to 14") - Cobra Jet Shaker Scoop/SVT Emblems - MACh 1 License Plate Frame - Eibach Sportlines - 03 Cobra front/rear fascia, rocker panels - Grillcraft Sport Grille (lower) - Hurst Shifter - 18x9&18x10s w/255/295 BFGs

04-14-2007, 06:49 PM	#21
BONESTOCK Registered User Join Date: Jul 2004 Location: MA Posts: 1,685	Re: Will 335's fit on our car? I now have BF Goodrich Drag Radials. 315/35/17's. They seem to be just as wide as the 335's. haha __________________ 2004 Torch Red Mach 1 born on 03/26/04purchased on 07/14/04 465rwhp 409rwtq Let's go for a ride in my car! Procharged Dyno vid!

04-15-2007, 07:55 PM	#22
ScreaminMachOne Missing Third! Join Date: Aug 2006 Location: Sterling,Va Posts: 893	Re: Will 335's fit on our car? bonestock you lower your car __________________ 04 Mach 1 Forged-D1-5spd 10.89@128mph 1.68 Sixty

04-15-2007, 10:34 PM	#24
ScreaminMachOne Missing Third! Join Date: Aug 2006 Location: Sterling,Va Posts: 893	Re: Will 335's fit on our car? Wonder if I should try the drag lauch springs __________________ 04 Mach 1 Forged-D1-5spd 10.89@128mph 1.68 Sixty

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: