|
|
Accessories - Non Performance type add-ons Found any cool accessories for your Mach 1? NON Performance add-ons. |
|
Thread Tools | Display Modes |
07-17-2005, 02:39 PM | #1 |
Registered User
Join Date: Aug 2003
Location: Plano, TX
Posts: 349
|
Mach 1 Laser Cut Scuff Plates
Would anyone be intrested in me making some more of the laser cut scuff plates? If there are about 15 or so people that would like them, I will make them. These have the logo laser cut out so that the color of your car shows through. I quit making them in the past because I was having to scrap too many of the parts. I now have access to a new laser that is much better than the one I used in the past, so I am willing to begin making them again.
These are the only pics I can find right now. I'm sure some of the members on here have some better ones. Jay
__________________
296.6 HP and 320.2 TQ www.PrecisionAutoAccessories.com Black with silver stripes Mach 1 scuff plates Billet fuel door Magnaflow cat-back and X pipe Steeda strut tower brace Steeda tri-ax MRT Street Springs Tokico Illuminas Diablo Predator Tune G-Force 4pt. Harness Steeda front sway bar Steeda bump steer kit MM CC Plates More to come |
07-17-2005, 03:09 PM | #2 |
Registered User
Join Date: Dec 2004
Posts: 397
|
Re: Mach 1 Laser Cut Scuff Plates
Look good, how much $ for brushed/polished?
|
07-17-2005, 07:27 PM | #3 |
Registered User
Join Date: Nov 2003
Location: Sebastian, FL
Posts: 128
|
Re: Mach 1 Laser Cut Scuff Plates
I will take a set if you remake them.
__________________
#1 '04 Competition Orange Mach 1 Vin # 1FAFP42R24F137829 #2 '02 Torch Red Roush Stage 2 Vert #3 '01 Lincoln Navigator w/ all the goodies |
07-17-2005, 08:27 PM | #4 |
Registered User
Join Date: Aug 2003
Location: Plano, TX
Posts: 349
|
Re: Mach 1 Laser Cut Scuff Plates
Sorry about that, I charge $79.95 for the set, but since this would be sort of a group buy, I will sell them for $69.95 if I can get about 15-20 people.
Thanks, Jay
__________________
296.6 HP and 320.2 TQ www.PrecisionAutoAccessories.com Black with silver stripes Mach 1 scuff plates Billet fuel door Magnaflow cat-back and X pipe Steeda strut tower brace Steeda tri-ax MRT Street Springs Tokico Illuminas Diablo Predator Tune G-Force 4pt. Harness Steeda front sway bar Steeda bump steer kit MM CC Plates More to come |
07-17-2005, 09:47 PM | #5 |
Wax-a-holic
Join Date: May 2003
Location: Overland Park, KS
Posts: 2,436
|
Re: Mach 1 Laser Cut Scuff Plates
I'd definitely go for a set...I've seen them in person and they are beautiful quality pieces.
PM me when you have them made..I can PayPal or Check/M.O. Totoland Mach |
07-17-2005, 09:57 PM | #6 |
CORPSE
Join Date: Oct 2003
Location: Buffalo, NY
Posts: 188
|
Re: Mach 1 Laser Cut Scuff Plates
I would be in for a brushed set as well..let me know.
__________________
Never underestimate the power of stupid people in large groups |
07-17-2005, 10:55 PM | #7 |
8LB YNER
Join Date: Mar 2005
Location: Tampa
Posts: 5,661
|
Re: Mach 1 Laser Cut Scuff Plates
Count me in for a brushed set.
__________________
Just because you're winnin' Don't mean you're the lucky ones TR 2003 (Jezebel) sold Mar 12... |
07-17-2005, 11:21 PM | #8 |
no, it's not my husband's
Join Date: Feb 2005
Location: Puerto Rico
Posts: 166
|
Re: Mach 1 Laser Cut Scuff Plates
I'm in too!!!!!! start counting....
|
07-17-2005, 11:23 PM | #9 |
1992-2007 RIP Klondike
Join Date: Nov 2002
Location: Thornton, Colorado
Posts: 231
|
Re: Mach 1 Laser Cut Scuff Plates
Polished for me please
__________________
Klondike (aka Chuck) 2003 Dark Shadow Gray Born on date 11/18/2002 1985 Coupe, race car |
07-17-2005, 11:55 PM | #10 |
old timer
Join Date: Aug 2004
Location: Langley, BC
Posts: 1,889
|
Re: Mach 1 Laser Cut Scuff Plates
I'd take polished too... let me know and paypal will be on its way.
Adrian
__________________
Sold: Screaming Yellow Intercooled 2.1 KB 5speed Mach 1 running a measly 8psi |
07-18-2005, 12:04 AM | #11 |
Registered User
Join Date: Jul 2004
Location: Dallas, Texas
Posts: 41
|
Re: Mach 1 Laser Cut Scuff Plates
I'm in for a polished set.. question though.. do these just fit over whatever is there now? or does something have to be removed?
|
07-18-2005, 12:05 AM | #12 |
Undocumented Member
Join Date: Feb 2004
Location: Enterprise, AL
Posts: 15,828
|
Re: Mach 1 Laser Cut Scuff Plates
Brushed for me, let us know how to pay and get the ball rolling. They look great.
__________________
_____________________________________________ 2003 Mach1 AB 5spd 2004 Mach1 TR 5spd (sold) 1933 Ford 3W Coupe (4.6 dohc Stack Injection) 2003 Cobra TR (sold) 2014 Mustang GT (Track Pack) in Black |
07-18-2005, 12:48 AM | #13 |
Registered User
Join Date: Aug 2003
Location: Plano, TX
Posts: 349
|
Re: Mach 1 Laser Cut Scuff Plates
Looks like we are going to have plenty of people interested for me to make them. When the parts are closer to ready, I will setup a way to purchase them using paypal at my website www.precisionautoaccessories.com. I will also except check/money orders. Please do not send money yet. I wouldn't feel right about having your money when I am not even sure of the prodution date yet. I will order the material tomorrow and keep everyone posted on this thread.
reddeath, here are the installation instructions. It take less than 5 min. http://www.precisionautoaccessories....tructions.html Thanks, Jay
__________________
296.6 HP and 320.2 TQ www.PrecisionAutoAccessories.com Black with silver stripes Mach 1 scuff plates Billet fuel door Magnaflow cat-back and X pipe Steeda strut tower brace Steeda tri-ax MRT Street Springs Tokico Illuminas Diablo Predator Tune G-Force 4pt. Harness Steeda front sway bar Steeda bump steer kit MM CC Plates More to come |
07-18-2005, 02:07 AM | #14 |
I Own Stangs!
Join Date: Apr 2005
Location: san diego,ca
Posts: 113
|
Re: Mach 1 Laser Cut Scuff Plates
I"ll Take A Set,let Me Know When There Ready
__________________
Car equipped with: Mac pro chamber dual cat h pipe mac cat back exhaust system (3 1/2 tip) Frpp 4 10 gears Sprints lowering springs (2 1/2 front / 2 back) Maximum sports lower control arms CnL c.a.i system Diablo Sports tuner Body work: Chrome Bulliet deep dish rims (front 17x9 with nittos 555 extreme 275/40 17) (rear 17x10 1/2 with nittos drag radials 315/35 17) Demon Gorund effects full body kit Roush rear spoiler MId black limo tint all around |
07-18-2005, 07:21 AM | #15 |
Mach and Roll
Join Date: Jun 2003
Location: Sterling Heights, Mi
Posts: 480
|
Re: Mach 1 Laser Cut Scuff Plates
I have a set of the Brushed you did previously and they are AWESOME!!! Very nice work!! I get alot of Comments on them!!
__________________
JUDY 2008 GT/CS Convertible Dark Candy Apple Red Metallic Auto (Its heck to get old) Supporting Member Sold My Mach Blue Azure Mach1 IUP 5SPD Vin# 426872 Build Date 5-14-03 Bought 6-6-03 Hood Blacked Out Honeycomb Trim Panel Stars & Stripe Grill Pony Flowmasters & MRT H-Pipe Billet Fuel Door w/Mach Logo Street Smart CAI Member of MCA and Mustang Club of Greater MT. Clemens |
07-18-2005, 01:24 PM | #16 |
firemedicleo
Join Date: May 2005
Location: port richey
Posts: 51
|
Re: Mach 1 Laser Cut Scuff Plates
I would love a set, been waiting for these instead of the other.
|
07-18-2005, 03:11 PM | #17 |
Registered User
Join Date: Jul 2004
Location: Tampa FL
Posts: 60
|
Re: Mach 1 Laser Cut Scuff Plates
I will take a set of brushed ones let me know when ready to order.
__________________
JLT RAI TRI-AX Diablosport Predator Magnaflow |
07-18-2005, 10:26 PM | #18 |
Registered User
Join Date: Oct 2003
Location: Winnipeg, Manitoba
Posts: 120
|
Re: Mach 1 Laser Cut Scuff Plates
I would be interested in a set of brushed scuff plates.
|
07-18-2005, 11:27 PM | #19 |
Guest
Join Date: Apr 2004
Location: Houston, TX
Posts: 2,105
|
Re: Mach 1 Laser Cut Scuff Plates
I will go for Polished! PM when ready to sell them.
|
07-19-2005, 09:32 AM | #20 |
Spin'n and grin'n
Join Date: Oct 2004
Location: MT Carmel TN
Posts: 144
|
Re: Mach 1 Laser Cut Scuff Plates
I'd like a set of brushed also.
__________________
2004 Mach 1 Azure Blue PHP air box, Steeda pullies, SLP catback, SLP Catted x pipe, Steeda tri-ax shifter 281.1 hp 304 tq (Before pullies and x pipe and Procharger) 429.9 hp 394 tq 9.8/1 AF 12.162 @ 115.74 Procharger 8LB Kenne Bell Boost-a-Pump SVT Focus Pump 42# Injectors SCT Big Air Meter SCT tuner Guages Raptor Shift light 26x10.5 E.T streets have for sell PHP air box Steeda pullies |
07-20-2005, 03:44 AM | #21 |
Guest
Join Date: Aug 2002
Location: Spokane, WA
Posts: 642
|
Re: Mach 1 Laser Cut Scuff Plates
I'll buy a set. Not sure which ones till I see a few more pictures but please count me in.
|
07-20-2005, 10:11 AM | #22 |
Registered User
Join Date: Jan 2004
Location: Timbukto, AK
Posts: 1,587
|
Re: Mach 1 Laser Cut Scuff Plates
No thanks.
__________________
04 Azure Blue Mach 1 SOLD! IUP Steeda Tri-Ax K&N filter SLP Loudmouth catback |
07-20-2005, 10:53 AM | #23 |
Registered User
Join Date: Apr 2004
Location: FL
Posts: 1,951
|
Re: Mach 1 Laser Cut Scuff Plates
I'd like a set of brushed also.
|
07-20-2005, 04:13 PM | #24 |
Registered User
Join Date: Dec 2004
Posts: 397
|
Re: Mach 1 Laser Cut Scuff Plates
1 brushed, thanks, Jim.
|
07-20-2005, 05:12 PM | #25 | |
CORPSE
Join Date: Oct 2003
Location: Buffalo, NY
Posts: 188
|
Re: Mach 1 Laser Cut Scuff Plates
Quote:
Post whore.......
__________________
Never underestimate the power of stupid people in large groups |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|