|
|
NEW Mach 1 Owner Introductions NEW Owner's, Say HI and intro yourself here! |
|
Thread Tools | Display Modes |
08-30-2018, 12:19 PM | #1 |
Registered User
Join Date: Aug 2018
Location: Kearney, Nebraska
Posts: 6
|
Anyone know this car? Black Mach 1 from Alabama/Kingman AZ
I recently purchased this Mach to participate in the Sandhills Open Road Challenge (SORC) in Nebraska. It’s a 55 mile road race. I’m planning on adding a few things to the car as it has some nice modifications already. I’m interested in hearing from the previous owner as I’d like to know if there has been anything done to it that I may be missing.
Car seems to have living in Vegas, Montgomery Alabama and Kingman Arizona Modifications currently done: Kooks stainless headers/X pipe (no cats) Borla stainless exhaust K&N intake MGW short throw shifter SVT Cobra wheels AEM A:F gauge (kinda works sometimes) Planned Modifications for the race next August (I’ll be making another thread regarding this) E85 conversion— 39lb FRPP injectors, deatsch 340lph pump Aluminum Driveshaft 4.30 gears Hawk HP Plus brake pads Kenny Brown brake cooling ducts Dyno tune/SCT tuner by lsxklr out of Bonner springs KS Maybe 18” wheels with tires yet to be determined Ethanol monitor gauge Fuel pressure gauge Some kind of Track Attack GPS speed monitor ...other stuff I’m sure... probably not going to do much suspension work yet Planning on competing in the 90mph class Last edited by blk-mach; 08-30-2018 at 12:52 PM. |
08-30-2018, 12:30 PM | #2 |
Registered User
Join Date: Aug 2018
Location: Kearney, Nebraska
Posts: 6
|
Re: Anyone know this car? Black Mach 1 from Alabama/Kingman AZ
More pics to come
|
08-30-2018, 05:19 PM | #3 |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: Anyone know this car? Black Mach 1 from Alabama/Kingman AZ
For a road course why 4:30 gears? That is more for drag strip in my humble opinion, why not stock 3:55, or hell a 3:27 for the long, straight stretches?
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
08-30-2018, 05:20 PM | #4 |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: Anyone know this car? Black Mach 1 from Alabama/Kingman AZ
Also what spring, shocks, sway bar, etc mods? Is it a curvy course?
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
08-30-2018, 06:16 PM | #5 |
Registered User
Join Date: Aug 2018
Location: Kearney, Nebraska
Posts: 6
|
Re: Anyone know this car? Black Mach 1 from Alabama/Kingman AZ
Would the 4.30s be too low? I’ve read quite a bit and it seems to be the gear of choice for the Mach 1 given the pretty high redline.
For those unfamiliar with the SORC you should really check it out. Pretty unique event with awesome cars from all over the country. The course has some curves and hills. Lots of straights. Competing in the 90mph class means whoever averages closest to 90 wins. Max of 120 on the straights. I’ve never owned a car before (slow diesel pickups and fast motorcycles) so I’m certainly open to input. I figured the 4.30s would leave it in a good part of the powerband around 90mph in 4th. |
08-30-2018, 06:19 PM | #6 |
Registered User
Join Date: Aug 2018
Location: Kearney, Nebraska
Posts: 6
|
Re: Anyone know this car? Black Mach 1 from Alabama/Kingman AZ
Considering leaving the stock setup. I’m a little hesitant to mess with the geometry too much given the rate of speed involved and my inexperience with such things. I figure the ford engineers know better than I do. I’m certainly open to suggestions. I don’t really want to lower the car much as the long tube headers bottom out on occasion already
|
08-30-2018, 06:27 PM | #7 |
Registered User
Join Date: Aug 2018
Location: Kearney, Nebraska
Posts: 6
|
Re: Anyone know this car? Black Mach 1 from Alabama/Kingman AZ
https://m.youtube.com/watch?v=ubtZ2txLSPM
Three events in the challenge 22 mile (11 down 11 back) Loup 2 Loup race 1 mile top speed shoot out 55 mile open road race |
08-30-2018, 06:32 PM | #8 |
Registered User
Join Date: Aug 2018
Location: Kearney, Nebraska
Posts: 6
|
Re: Anyone know this car? Black Mach 1 from Alabama/Kingman AZ
More pics
|
09-01-2018, 06:07 AM | #9 |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: Anyone know this car? Black Mach 1 from Alabama/Kingman AZ
You should be ok except for top speed in a mile...I have a set of road course rotors and brake padsused once for a 3 25 min session at Roebling rd in Ga...Raybestos ST-47, came from a race shop in NC. Read up on them and make an offerm.NOT for the street and don't faint at the price...I was out braking vettes, any pretry much everyone, will never use again and sitting in a cooler.
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
09-07-2018, 07:07 PM | #10 |
Can't be bridled
Join Date: Sep 2007
Location: Texas
Posts: 7,006
|
Re: Anyone know this car? Black Mach 1 from Alabama/Kingman AZ
Welcome to the Reg. If you are not comfortable setting the car up but still want it to go faster around a corner, contact maximum motorsports, kenny brown or steeda. They are the leaders of road racing mustang suspension and can help you do it correctly the first time. Factory Mach 1 suspension is aimed more towards 1/4 mile performance and will be severely lacking in a road race environment.
__________________
2004 Mach 1 #6956 5spd w/IUP Eaton swap, longtubes, built 3.73 SRA 452hp/409tq dynojet🏁 |
09-11-2018, 12:30 PM | #11 |
Lorraine's driver
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
|
Re: Anyone know this car? Black Mach 1 from Alabama/Kingman AZ
You never want to get to the point where you have to go into 5th gear. 4.30's might make you have to lift the accelerator on those really long straights. Those TR3650's are really geared more toward the 1/4 as well. That first gear is granny-low, like 3.30+something. If you have 4.30's and ever need to drop it in 1st on a super tight curve, it would suck IMO. I'm certainly no expert, but I would think 3.73's would be low enough to make 2nd gear useful for those situations. I would definitely see how it does with the stock gears before doing anything, though.
__________________
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|