|
01-21-2015, 01:00 PM | #26 |
Azure Blue Mach
Join Date: Apr 2007
Location: St. Petersburg, FL
Posts: 1,464
|
Re: Sticky Suspension Thread
Suspension mods:
2003 Cobra IRS swap Custom DSS Level 5 half shafts with stock hubs Complete Full Tilt Boogie racing IRS bushing kit (less rear differential mount) Maxiumum Motorsports Solid rear differential mount Steeda front bump steer kit Steeda solid front sway bar mounts Eibach front sway bar Eibach rear sway bar Maximum Motorsports Sport series coil overs on all 4 corners (400/600 hypercoil springs) Maximum Motorsports Cast Camber plates Maximum Motorsports A arms Maximum Motorsports solid steering rack mounts Steeda full length subframe connectors Kenny Brown Extreme Matrix Bracing and jacking rails
__________________
'03 Azure Blue Mach 1 Built on 4/14/03 S&R Performance |
07-13-2016, 02:47 AM | #27 |
Registered User
Join Date: Mar 2014
Location: MO
Posts: 6
|
Re: Sticky Suspension Thread
SR Lowering Springs
Stock Isos Stock Wheels Stock Suspension Plan to install J&M CC plates to help toe in wear.. shouldn't change the stance though |
08-20-2017, 01:14 PM | #28 |
Registered User
Join Date: Mar 2012
Location: Houston, TX
Posts: 8
|
Re: Sticky Suspension Thread
H&r springs
eibach pro dampers j&m lower control arm bbk cc plates soon will have eibach anti-sway bars strut tower braces |
09-16-2017, 09:01 PM | #29 |
Registered User
Join Date: Aug 2017
Location: Pekin il
Posts: 2
|
Re: Sticky Suspension Thread
Hey guys I have a 03 Mach and I'm wanting to do the upr
k member with tubular a arms bumpsteer kit and coil overs.kinda need some direction on what coil overs and struts. From what I've read 12-250 on coils is what I might like for ride height.. I'm wantin to just do h&r springs in the back.. basically I want the ride height if eibach sport line with coil overs out front instead.. anyone who has this set up and can give me a good list of what parts to get to achieve this would be my hero lol .. money isn't really a issue but I wanna stay reasonable. Also I plan on running fr 500 18x10 18x9 staggered with nt05 drags in the back 305,35/18 unless I can squeez a 315 out back? and 555's in the front 265/35/18 just thought I'd add that Incase of fitment issues.. car will see about 3,000 miles a year 95% street thanks gents |
09-17-2017, 07:19 AM | #30 |
Registered User
Join Date: Aug 2004
Location: Winston-Salem,NC
Posts: 1,802
|
Re: Sticky Suspension Thread
Start with MM stuff rather than UPR.
__________________
2003 Azure mach1 5 speed with IUP Maximum Motorsports R&T Box with Torque Arm and lots of other bits and pieces here and there 2012 Candy Red Metalic Premium GT with Brembo/Trak Pak and 373s HPDE Instructor |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|