Eaton swap Mach 1 - 2003-04 Mach 1 Registry Owners Club

xXAzureMach1Xx · 10-01-2009, 07:35 PM

Short little video of the car gettin tuned. Car is stock with a K&N filter. it was like 97 degress, timin was 15 or 16 and AF was 11.7

http://videos.streetfire.net/video/E...h-1_709132.htm

DarkMach1 · 10-04-2009, 04:08 PM

Sounds good man congrats! So everything is stock, even the exhaust system?

xXAzureMach1Xx · 10-04-2009, 04:33 PM

yep EVERYTHING

DarkMach1 · 10-04-2009, 07:56 PM

Good, then my headers can wait, ill get the blwer first.

xXAzureMach1Xx · 10-04-2009, 08:04 PM

Yea I put the same amount of money into my eaton swap as I would have if I did full exhaust and other bolt ons

N/AKing · 10-04-2009, 08:26 PM

Quote:

Originally Posted by xXAzureMach1Xx

Yea I put the same amount of money into my eaton swap as I would have if I did full exhaust and other bolt ons

Man thats freaking awesome.

Did you piece the kit together? Or did you just go straight to ford and buy all new parts? Also, did you install it or did the shop?

Thanks for answering the questions, I'm trying to figure out if I wanna go eaton swap or procharger.

xXAzureMach1Xx · 10-04-2009, 08:37 PM

Pieced it together over the past year. I did the install myself.

LOOKnGO · 10-04-2009, 08:38 PM

Good job, you have any left over parts.

xXAzureMach1Xx · 10-04-2009, 09:45 PM

Yes i do. Got a few Cobra parts and some Mach 1 parts that i need to sell

LOOKnGO · 10-04-2009, 09:58 PM

ok, i'll wait for your new thread

xXAzureMach1Xx · 10-04-2009, 10:14 PM

Ill do a forsale thing later, Cobra parts,Lower crank pulley, Intercooler( has one little spot on the fins),39 lb injecters(they maybe sold still wantin to hear from the guy), vacuum parts on side of blower and some vacuum lines. mach parts, K&N CAI, Steeda UDP, 24 lb injecters, Knock sensor, cross over tube, Radiator hoses,and stock O2 sensors, think thats about it

bart03m1 · 10-05-2009, 01:46 AM

got to love the whin, its like music to my ears

1qkmch · 10-06-2009, 01:30 PM

That's awesome. About how much does the swap cost?

xXAzureMach1Xx · 10-06-2009, 02:06 PM

I have about 2800 in it. thats tune, chip, Wideband, boost gauge, coolin mod and a few other things that i didnt have to have but wanted.

1qkmch · 10-06-2009, 02:11 PM

That's a great deal. I might consider doing that once I get the car paid off next year. I already have the supporting mods so I don't need a lot of the extra's.

DarkMach1 · 10-06-2009, 02:57 PM

Quote:

Originally Posted by xXAzureMach1Xx

I have about 2800 in it. thats tune, chip, Wideband, boost gauge, coolin mod and a few other things that i didnt have to have but wanted.

You upgraded the cooling system on stock boost? Why? And what did you add?

Bwahl602 · 10-06-2009, 05:02 PM

dark mach: sounds like he did the head cooling mod

very nice numbers azure mach.. you do full bolt ons and youll be knocking on 500 hp with a little more boost

xXAzureMach1Xx · 10-06-2009, 05:26 PM

Quote:

Originally Posted by Bwahl602

dark mach: sounds like he did the head cooling mod

very nice numbers azure mach.. you do full bolt ons and youll be knocking on 500 hp with a little more boost

Yea it is the head coolin mod.

I would like to see high 400s but we will see. Got some other things to do first but full exhaust and rai will be next.

DarkMach1 · 10-06-2009, 06:17 PM

Can someone give me a quick explanation on whats involved in this head coolong mod?

xXAzureMach1Xx · 10-06-2009, 06:49 PM

Quote:

Originally Posted by DarkMach1

Can someone give me a quick explanation on whats involved in this head coolong mod?

You take the freeze plug out of the drivers side head and you put the fittin that they send you with the kit and then you just cut the top rad hose in half and put in the T fittin and there's a hose that runs from the T fittin to the fittin in the head.

scxc15 · 10-06-2009, 06:50 PM

http://dagostinoracing.com/index.php...ecf60ef0a7d554

DarkMach1 · 10-06-2009, 07:30 PM

Got it thanks!

04machwon22 · 10-06-2009, 08:41 PM

cars pretty bad *** im looking to do an eaton swap also

Mustang92 · 10-09-2009, 03:26 PM

Welcome to the club!

Bill

xXAzureMach1Xx · 10-23-2009, 04:09 PM

put a or H pipe and the car pick up 21hp and 16tq. final numbers were 431 and 409

10-01-2009, 07:35 PM	#1
xXAzureMach1Xx 04 Mach 1 Join Date: Mar 2008 Location: Pensacola FL Posts: 140	Eaton swap Mach 1 Short little video of the car gettin tuned. Car is stock with a K&N filter. it was like 97 degress, timin was 15 or 16 and AF was 11.7 http://videos.streetfire.net/video/E...h-1_709132.htm

10-04-2009, 04:08 PM	#2
DarkMach1 Registered User Join Date: Aug 2008 Location: Miami,FL Posts: 399	Re: Eaton swap Mach 1 Sounds good man congrats! So everything is stock, even the exhaust system? __________________ 2004 black 5spd mach1 Mods-Eaton swap, stock pulley, LFP dual pass H/E, LFP cooling mod,Steeda tri-ax short shifter, SSS adrenaline catback, K&N filter, Mac prochamber, FRPP trac-lok, Moser 31 spline axles, FRPP 4.10 gears, FRPP aluminum driveshaft, Maximum Motorsports HD LCAs, Tuned by Paul Meister from Torq 424whp/381wtq on a Mustang Dyno Eaton swap Complete.... http://www.mach1registry.org/forums/...d.php?t=102292

10-04-2009, 04:33 PM	#3
xXAzureMach1Xx 04 Mach 1 Join Date: Mar 2008 Location: Pensacola FL Posts: 140	Re: Eaton swap Mach 1 yep EVERYTHING

10-04-2009, 07:56 PM	#4
DarkMach1 Registered User Join Date: Aug 2008 Location: Miami,FL Posts: 399	Re: Eaton swap Mach 1 Good, then my headers can wait, ill get the blwer first. __________________ 2004 black 5spd mach1 Mods-Eaton swap, stock pulley, LFP dual pass H/E, LFP cooling mod,Steeda tri-ax short shifter, SSS adrenaline catback, K&N filter, Mac prochamber, FRPP trac-lok, Moser 31 spline axles, FRPP 4.10 gears, FRPP aluminum driveshaft, Maximum Motorsports HD LCAs, Tuned by Paul Meister from Torq 424whp/381wtq on a Mustang Dyno Eaton swap Complete.... http://www.mach1registry.org/forums/...d.php?t=102292

10-04-2009, 08:04 PM	#5
xXAzureMach1Xx 04 Mach 1 Join Date: Mar 2008 Location: Pensacola FL Posts: 140	Re: Eaton swap Mach 1 Yea I put the same amount of money into my eaton swap as I would have if I did full exhaust and other bolt ons

10-04-2009, 08:37 PM	#7
xXAzureMach1Xx 04 Mach 1 Join Date: Mar 2008 Location: Pensacola FL Posts: 140	Re: Eaton swap Mach 1 Pieced it together over the past year. I did the install myself.

10-04-2009, 08:38 PM	#8
LOOKnGO AKA Peanut Gallery Join Date: Dec 2007 Location: Berryville, va Posts: 3,530	Re: Eaton swap Mach 1 Good job, you have any left over parts. __________________ *DUM SPIRO SPERO*

10-04-2009, 09:45 PM	#9
xXAzureMach1Xx 04 Mach 1 Join Date: Mar 2008 Location: Pensacola FL Posts: 140	Re: Eaton swap Mach 1 Yes i do. Got a few Cobra parts and some Mach 1 parts that i need to sell

10-04-2009, 09:58 PM	#10
LOOKnGO AKA Peanut Gallery Join Date: Dec 2007 Location: Berryville, va Posts: 3,530	Re: Eaton swap Mach 1 ok, i'll wait for your new thread __________________ *DUM SPIRO SPERO*

10-04-2009, 10:14 PM	#11
xXAzureMach1Xx 04 Mach 1 Join Date: Mar 2008 Location: Pensacola FL Posts: 140	Re: Eaton swap Mach 1 Ill do a forsale thing later, Cobra parts,Lower crank pulley, Intercooler( has one little spot on the fins),39 lb injecters(they maybe sold still wantin to hear from the guy), vacuum parts on side of blower and some vacuum lines. mach parts, K&N CAI, Steeda UDP, 24 lb injecters, Knock sensor, cross over tube, Radiator hoses,and stock O2 sensors, think thats about it

10-05-2009, 01:46 AM	#12
bart03m1 Registered User Join Date: Mar 2006 Location: san antonio Posts: 596	Re: Eaton swap Mach 1 got to love the whin, its like music to my ears __________________ c&l intake with 85mm mas air mgw shifter w/orange handle sct hand help ture w/2 custom tunes by jdm bbk long tube headers bbk catted x upr upper adj. control arms steeda lower adj. built rearend steeda sport springs

10-06-2009, 01:30 PM	#13
1qkmch Registered User Join Date: Sep 2009 Location: Oklahoma Posts: 121	Re: Eaton swap Mach 1 That's awesome. About how much does the swap cost? __________________ '04 Comp. Orange Mach 1 323hp/341tq N/A 11.45 @ 120mph 1.57 60' on a 100 shot.

10-06-2009, 02:06 PM	#14
xXAzureMach1Xx 04 Mach 1 Join Date: Mar 2008 Location: Pensacola FL Posts: 140	Re: Eaton swap Mach 1 I have about 2800 in it. thats tune, chip, Wideband, boost gauge, coolin mod and a few other things that i didnt have to have but wanted.

10-06-2009, 02:11 PM	#15
1qkmch Registered User Join Date: Sep 2009 Location: Oklahoma Posts: 121	Re: Eaton swap Mach 1 That's a great deal. I might consider doing that once I get the car paid off next year. I already have the supporting mods so I don't need a lot of the extra's. __________________ '04 Comp. Orange Mach 1 323hp/341tq N/A 11.45 @ 120mph 1.57 60' on a 100 shot.

10-06-2009, 05:02 PM	#17
Bwahl602 Pilot Join Date: Mar 2009 Location: West Grove, Pa Posts: 486	Re: Eaton swap Mach 1 dark mach: sounds like he did the head cooling mod very nice numbers azure mach.. you do full bolt ons and youll be knocking on 500 hp with a little more boost __________________ 04 TR mach. #6787

10-06-2009, 06:17 PM	#19
DarkMach1 Registered User Join Date: Aug 2008 Location: Miami,FL Posts: 399	Re: Eaton swap Mach 1 Can someone give me a quick explanation on whats involved in this head coolong mod? __________________ 2004 black 5spd mach1 Mods-Eaton swap, stock pulley, LFP dual pass H/E, LFP cooling mod,Steeda tri-ax short shifter, SSS adrenaline catback, K&N filter, Mac prochamber, FRPP trac-lok, Moser 31 spline axles, FRPP 4.10 gears, FRPP aluminum driveshaft, Maximum Motorsports HD LCAs, Tuned by Paul Meister from Torq 424whp/381wtq on a Mustang Dyno Eaton swap Complete.... http://www.mach1registry.org/forums/...d.php?t=102292

10-06-2009, 06:50 PM	#21
scxc15 Gear Grinder Join Date: Apr 2008 Location: East Tennessee Posts: 226	Re: Eaton swap Mach 1 http://dagostinoracing.com/index.php...ecf60ef0a7d554 __________________ 2003 Azure Blue Mach 1 5-Speed JLT Ram Air Intake MGW Shifter o/r X-Pipe Nitto 555Rs(315s) BBK LTs AJE K-member Eibach Sportline Springs Moroso Wet Sump Street/Strip Oil Pan SCT X-Cal 3 tuned by ModularPowerHouse Steeda Clutch Adjuster FRPP 4.30 Gears NGK TR55ix Plugs 1/2" Intake Spacer EGR Delete Steeda Under Drive Pulleys Centerforce DF Clutch 2003 Black GT SOLD 2003 Red V6 SOLD

10-06-2009, 07:30 PM	#22
DarkMach1 Registered User Join Date: Aug 2008 Location: Miami,FL Posts: 399	Re: Eaton swap Mach 1 Got it thanks! __________________ 2004 black 5spd mach1 Mods-Eaton swap, stock pulley, LFP dual pass H/E, LFP cooling mod,Steeda tri-ax short shifter, SSS adrenaline catback, K&N filter, Mac prochamber, FRPP trac-lok, Moser 31 spline axles, FRPP 4.10 gears, FRPP aluminum driveshaft, Maximum Motorsports HD LCAs, Tuned by Paul Meister from Torq 424whp/381wtq on a Mustang Dyno Eaton swap Complete.... http://www.mach1registry.org/forums/...d.php?t=102292

10-06-2009, 08:41 PM	#23
04machwon22 FOR SALE Join Date: Jul 2008 Location: Bel Air, Maryland Posts: 731	Re: Eaton swap Mach 1 cars pretty bad *** im looking to do an eaton swap also

10-09-2009, 03:26 PM	#24
Mustang92 Registered User Join Date: Apr 2008 Location: South Florida Posts: 159	Re: Eaton swap Mach 1 Welcome to the club! Bill __________________ 2004 Mach 1 Comp Org P1SC - 468RWHP/417RWTQ - 11.93 @ 119.78 NA, Mid Lengths, Catted X - 307RWHP/318RWTQ - 12.89 @ 108.70 Eaton - 411RWHP - 12.32 @ 114 3.4 Whipple - Coming soon

10-23-2009, 04:09 PM	#25
xXAzureMach1Xx 04 Mach 1 Join Date: Mar 2008 Location: Pensacola FL Posts: 140	Re: Eaton swap Mach 1 put a or H pipe and the car pick up 21hp and 16tq. final numbers were 431 and 409

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: