Insert Your Exhaust Sound Clips Here - Page 11 - 2003-04 Mach 1 Registry Owners Club

TransAxle · 04-26-2008, 07:50 AM

Magnaflow Magnapacks & Magnaflow O/R X-Pipe

http://www.youtube.com/watch?v=O0fJj73Ga0s

Gameboy_J · 04-28-2008, 12:21 PM

2003 Mach 1, 5-speed

Headers: Stock

Mid Pipe: Mac O/R H pipe

Cat-back: Mac SS Cat-back w/ 3.5" tips

http://www.youtube.com/watch?v=qZgF68X3kZY

Mach1 Of A Kind · 05-04-2008, 11:36 PM

Mac long tubes, Mac prochamber, Mac mufflers & tail pipes, Magnaflow 4 inch rolled tips. All SS.

http://www.youtube.com/watch?v=KTNVqfVhxO0

Jester · 05-08-2008, 12:01 AM

Here's mine....

http://www.youtube.com/watch?v=JhicKbark2o

jledesma · 05-08-2008, 04:21 PM

How much was your set-up? Where you get the Pypes X from? Thanks.

Quote:

Originally Posted by weaver

Stock headers
Pypes o/r x-pipe
Flows Super 44's
4" tips

http://videos.streetfire.net/video/0...44s_155104.htm

weaver · 05-08-2008, 04:53 PM

Quote:

Originally Posted by jledesma

How much was your set-up? Where you get the Pypes X from? Thanks.

Got a catted x-pipe(cats have been removed) from rpmoutlet.com and ordered Flowmaster Super 44's from autopartswarehouse.com(great price and free shipping on orders over $50)

I'd say about $500 total, give or take some. That includes having the mufflers welded in. Of course it would be cheaper buying an o/r x-pipe.

I also have some handmade 4" stainless tips.

Mustang9668 · 05-12-2008, 01:26 AM

Pypes O/R X pipe and stock mufflers

Just bought a Borla Stinger cat-back on ebay tonight so I'll have sound clips of that soon.

http://www.youtube.com/watch?v=2BFTPnLvA-g

weaver · 05-19-2008, 09:37 PM

Quote:

Originally Posted by R.Shackleford

Mac catback and Pypes O/R X

How's the interior noise? Can you compare it to Flows?

R.Shackleford · 05-19-2008, 11:48 PM

Quote:

Originally Posted by weaver

How's the interior noise? Can you compare it to Flows?

I haven't had flows on this car, or rode in a car with them so can't really compare. IMO interior noise isn't too bad. I can cruise with the windows up and ac on and talk with someone comfortably if necessary, lol. Of course under any kind of acceleration volume goes up dramatically. There's some "drone", but I find it to be just about right. I like to be able to hear what's going on, plus why wouldn't you want to hear the beautiful noise

. I could never get tired of it personally. Other than that it sounds awesome inside the car.

I'm thinking about picking up a HD camera, and if so I'll be making new videos including some interior, I've had a handful of people ask about it.

weaver · 05-20-2008, 12:30 AM

Quote:

Originally Posted by R.Shackleford

I haven't had flows on this car, or rode in a car with them so can't really compare. IMO interior noise isn't too bad. I can cruise with the windows up and ac on and talk with someone comfortably if necessary, lol. Of course under any kind of acceleration volume goes up dramatically. There's some "drone", but I find it to be just about right. I like to be able to hear what's going on, plus why wouldn't you want to hear the beautiful noise

. I could never get tired of it personally. Other than that it sounds awesome inside the car.

I'm thinking about picking up a HD camera, and if so I'll be making new videos including some interior, I've had a handful of people ask about it.

It's a toss up between Mac's and Hooker maximum flow mufflers. THIS is a decent little camera for the price. The videos on there site look pretty good. Sound seems to be good too.

2sick4v's · 05-20-2008, 02:01 AM

Quote:

Originally Posted by weaver

It's a toss up between Mac's and Hooker maximum flow mufflers. THIS is a decent little camera for the price. The videos on there site look pretty good. Sound seems to be good too.

i had flows and switched them out for mac and mac has less drone sounds10000000x times better and i felt more power.

jledesma · 05-20-2008, 03:21 AM

Where did you buy the Pypes X & Mac cb from? Still lookinh for the cheapest place so I can finish my exhaust. Thanks

Quote:

Originally Posted by R.Shackleford

I haven't had flows on this car, or rode in a car with them so can't really compare. IMO interior noise isn't too bad. I can cruise with the windows up and ac on and talk with someone comfortably if necessary, lol. Of course under any kind of acceleration volume goes up dramatically. There's some "drone", but I find it to be just about right. I like to be able to hear what's going on, plus why wouldn't you want to hear the beautiful noise

. I could never get tired of it personally. Other than that it sounds awesome inside the car.

I'm thinking about picking up a HD camera, and if so I'll be making new videos including some interior, I've had a handful of people ask about it.

R.Shackleford · 05-20-2008, 10:45 PM

I bought the c/b from a website that is no longer up anymore, that was in 2006, don't know where's cheapest now. Bought the X from RPMoutlet, though they have raised the price now, I got it for 150 shipped. It's like 190 now. I'd get a X off ebay, either pypes or UPR. Last I checked you could get a new one for around 150-160 shipped (UPR or Pypes)

jledesma · 05-21-2008, 04:09 PM

I seen those Pypes on ebay. I guess the newer MAC cb are aluminized steel? Bot sure if better/worse than ss. Thanks.

Quote:

Originally Posted by R.Shackleford

I bought the c/b from a website that is no longer up anymore, that was in 2006, don't know where's cheapest now. Bought the X from RPMoutlet, though they have raised the price now, I got it for 150 shipped. It's like 190 now. I'd get a X off ebay, either pypes or UPR. Last I checked you could get a new one for around 150-160 shipped (UPR or Pypes)

R.Shackleford · 05-21-2008, 10:13 PM

There should be aluminized and ss available, aluminized is cheaper than SS. Mine is aluminized with the black coating. SS is "better", though it really depends on where you live and the conditions in which you drive the car. If your area is known for rust, you drive in snow, road salt, a lot of rain, live by the ocean, etc, then SS has a better chance to survive longer.

DISHNSWISH · 05-22-2008, 04:46 PM

Quote:

Originally Posted by jledesma

I seen those Pypes on ebay. I guess the newer MAC cb are aluminized steel? Bot sure if better/worse than ss. Thanks.

check out brenspeed.com thats where i got my pypes catted x and mac catback.

jledesma · 05-22-2008, 10:57 PM

Cool, I'm in Ewa also, who did your install when you received your exhaust?

Quote:

Originally Posted by DISHNSWISH

check out brenspeed.com thats where i got my pypes catted x and mac catback.

DISHNSWISH · 05-23-2008, 01:41 PM

i installed it myself and it wasnt fun. the x pipe and the mac came in six pieces. i had trouble aligning the thing under jackstands. plus i had to saw off the stock exhaust by hand. in the end i had it all together but it still didnt align correctly. the x pipe was low and scraping the speed bumps. so i took it to exhaust systems hawaii. they charged me 100 just to align the pipes.

Quote:

Originally Posted by jledesma

Cool, I'm in Ewa also, who did your install when you received your exhaust?

jledesma · 05-24-2008, 04:45 AM

I thought about going thru ESH. Otherwise Henry Tabios in Ewa. Thanks.

Quote:

Originally Posted by DISHNSWISH

i installed it myself and it wasnt fun. the x pipe and the mac came in six pieces. i had trouble aligning the thing under jackstands. plus i had to saw off the stock exhaust by hand. in the end i had it all together but it still didnt align correctly. the x pipe was low and scraping the speed bumps. so i took it to exhaust systems hawaii. they charged me 100 just to align the pipes.

weaver · 06-16-2008, 06:16 PM

headers= stock
midpipe= Pypes o/r x
catback= stock tailpipes/Hooker Maximum flow mufflers/4" tips

REVS AND DRIVE

mijo_latino · 06-28-2008, 09:31 PM

Headers- stock
Midpipe- stock
catback- Magnapack

http://s81.photobucket.com/albums/j2...ent=Before.flv

Headers- stock
Midpipe- Magnaflow catted
catback- Magnapack

http://s81.photobucket.com/albums/j2...rent=After.flv

re1080 · 07-06-2008, 08:31 PM

kinda of a long vid its got some friends cars on it but here my clip of my exhaust mac cb pypes catted x
http://www.youtube.com/watch?v=_cJYDoF1RWA

R.Shackleford · 07-06-2008, 11:27 PM

Here's a new clip. It's not actually new, but I re-edited some older clips trying to get better quality now that youtube has the higher quality playback. So you have to be logged into youtube for the high quality. Not sure it's much different, maybe a little clearer sound and picture. I think I'm getting a HD camera soon.

http://youtube.com/watch?v=eLI4hLJm0mY

Pypes O/R X and Mac cat-back

c0nfl1kt · 07-20-2008, 04:27 PM

Here are updated ones.

Headers: American Racing Long Tube Headers
Midpipe: American Racing Off-Road X
Catback: Stainless Steel Systems

Dyno1(no tune): http://www.youtube.com/watch?v=o_lQF-NYkbo
Dyno2(no tune, slightly longer video): http://www.youtube.com/watch?v=RTMfM_YvGKY&feature=user
Short Drive-by(don't mind friends fag music): http://s9.photobucket.com/albums/a87...t=100_0520.flv

Mustang9668 · 07-21-2008, 10:50 AM

Sounds great.

How is the ground clearance with the American Racing headers? Also do you think they are wide enough to get an auto trans out without pulling a header.

04-26-2008, 07:50 AM	#251
TransAxle Registered User Join Date: Feb 2008 Location: Buford, GA Posts: 304	Re: Insert Your Exhaust Sound Clips Here Magnaflow Magnapacks & Magnaflow O/R X-Pipe http://www.youtube.com/watch?v=O0fJj73Ga0s __________________ 2003 Torch Red Mach 1 - 5spd - C&L Inlet Pipe, K&N Drop in Intake, 85mm MAF, Diablo Predator Programmer, Pro5.0 Shifter, Spec Stage 2 Clutch, Steel Flywheel, Roys P&P Intake Manifold, Roys Intake Spacer, Magnaflow Tru-x X-Pipe, Magnaflow Magnapack Cat-Back, Tokico Gas Struts, Eibach Springs

04-28-2008, 12:21 PM	#252
Gameboy_J Registered User Join Date: Apr 2007 Location: Louisville, KY Posts: 590	Re: Insert Your Exhaust Sound Clips Here 2003 Mach 1, 5-speed Headers: Stock Mid Pipe: Mac O/R H pipe Cat-back: Mac SS Cat-back w/ 3.5" tips http://www.youtube.com/watch?v=qZgF68X3kZY __________________ 2003 DSG Mach 1, 5-speed, IUP, 22k miles, 320rwhp/340rwtq 18" Anth. DD FR500's Nitto NT555 & NT555R DR's JLT Ram Air Intake 1/2" Intake Spacer Maximum Motorsports Rear LCA's Xcal3 w/ dyno tune FRPP 4.10 gears Moser Forged Axles FFRP Aluminum DS SLP line lock 8000k Bi-xenon HID's w/matching fogs MGW short throw Fidanza Billet alum. flywheel Eibach Pro-Kit Lowering Springs MM 4 bolt c/c plates BBK Ceramic Coated LT's BBK o/r H pipe Mac SS cat-back

05-04-2008, 11:36 PM	#253
Mach1 Of A Kind Registered User Join Date: Feb 2008 Location: Teulon,MB. Posts: 159	Re: Insert Your Exhaust Sound Clips Here Mac long tubes, Mac prochamber, Mac mufflers & tail pipes, Magnaflow 4 inch rolled tips. All SS. http://www.youtube.com/watch?v=KTNVqfVhxO0

05-08-2008, 12:01 AM	#254
Jester Super Moderator Join Date: Sep 2003 Location: Houston (Crosby), Texas Posts: 6,472	Re: Insert Your Exhaust Sound Clips Here Here's mine.... http://www.youtube.com/watch?v=JhicKbark2o __________________ 2003 Dark Shadow Gray Mach 1 FR500 Cams - FR500 Intake - Boss330 Heads 4.56 Gears - Kooks LTs - SCT PRP - SSS Catback 2004 Silver Metallic Cobra Whipple 140ax - 60lb injectors -Twin FGT Pumps 8 gauge/BAP/FPDM - JLT - Bassani Catted X Bassani Catback - SCT PRP - 4# Lower - 3.50/3.00 Uppers - 19/24 PSI _______________

05-12-2008, 01:26 AM	#257
Mustang9668 saving pennies Join Date: Apr 2008 Location: Griffin, Ga Posts: 836	Re: Insert Your Exhaust Sound Clips Here Pypes O/R X pipe and stock mufflers Just bought a Borla Stinger cat-back on ebay tonight so I'll have sound clips of that soon. http://www.youtube.com/watch?v=2BFTPnLvA-g

05-20-2008, 10:45 PM	#263
R.Shackleford Road Racin' Mach 1 Join Date: Sep 2006 Location: CA Posts: 1,354	Re: Insert Your Exhaust Sound Clips Here I bought the c/b from a website that is no longer up anymore, that was in 2006, don't know where's cheapest now. Bought the X from RPMoutlet, though they have raised the price now, I got it for 150 shipped. It's like 190 now. I'd get a X off ebay, either pypes or UPR. Last I checked you could get a new one for around 150-160 shipped (UPR or Pypes) __________________ 2003 Mach 1 5spd IUP YouTube.com/a707 MGW Shifter : SCT : Pypes O/R X : Magnapack cat-back : K&N Filter : Valentine 1 radar detector H&R SS Springs : Tokico D-specs : MM CC Plates : Brake Cooling Ducts : EBC Yellow Stuff Pads Street: Silver FR500 18x9 & 18x10 -- BFG KDW2 265/35 & 295/35 Track: Anthracite Shelby Torq-Thrust M 17x9 -- Falken RT615 275/40

05-21-2008, 10:13 PM	#265
R.Shackleford Road Racin' Mach 1 Join Date: Sep 2006 Location: CA Posts: 1,354	Re: Insert Your Exhaust Sound Clips Here There should be aluminized and ss available, aluminized is cheaper than SS. Mine is aluminized with the black coating. SS is "better", though it really depends on where you live and the conditions in which you drive the car. If your area is known for rust, you drive in snow, road salt, a lot of rain, live by the ocean, etc, then SS has a better chance to survive longer. __________________ 2003 Mach 1 5spd IUP YouTube.com/a707 MGW Shifter : SCT : Pypes O/R X : Magnapack cat-back : K&N Filter : Valentine 1 radar detector H&R SS Springs : Tokico D-specs : MM CC Plates : Brake Cooling Ducts : EBC Yellow Stuff Pads Street: Silver FR500 18x9 & 18x10 -- BFG KDW2 265/35 & 295/35 Track: Anthracite Shelby Torq-Thrust M 17x9 -- Falken RT615 275/40

06-16-2008, 06:16 PM	#270
weaver mach is sold Join Date: Jan 2007 Location: Charlotte, NC Posts: 1,046	Re: Insert Your Exhaust Sound Clips Here headers= stock midpipe= Pypes o/r x catback= stock tailpipes/Hooker Maximum flow mufflers/4" tips REVS AND DRIVE Last edited by weaver; 08-05-2008 at 12:16 PM.

06-28-2008, 09:31 PM	#271
mijo_latino Registered User Join Date: Apr 2008 Location: Canton, MI Posts: 18	Re: Insert Your Exhaust Sound Clips Here Headers- stock Midpipe- stock catback- Magnapack http://s81.photobucket.com/albums/j2...ent=Before.flv Headers- stock Midpipe- Magnaflow catted catback- Magnapack http://s81.photobucket.com/albums/j2...rent=After.flv __________________ 98' white auto GT............................03' White Auto Mach 1 Steeda sport springs......................Magnapack catback Tokico shocks/struts......................Appearance mods UPR 4-bolt c/c plates........................JLT Ram air intake 2003 Cobra front control arms BBK ceramic shorty headers MagnaFlow catted X-pipe/catback PI intake/ p&p plenum/ MRT CAI Retrofitted projector HID's Appearance mods

07-06-2008, 08:31 PM	#272
re1080 Registered User Join Date: Oct 2007 Location: farmingdale,Ny Posts: 3	Re: Insert Your Exhaust Sound Clips Here kinda of a long vid its got some friends cars on it but here my clip of my exhaust mac cb pypes catted x http://www.youtube.com/watch?v=_cJYDoF1RWA __________________ 03 mach 1 zinc yellow mac cb pypes x pipe jlt cai eibach sportlines

07-06-2008, 11:27 PM	#273
R.Shackleford Road Racin' Mach 1 Join Date: Sep 2006 Location: CA Posts: 1,354	Re: Insert Your Exhaust Sound Clips Here Here's a new clip. It's not actually new, but I re-edited some older clips trying to get better quality now that youtube has the higher quality playback. So you have to be logged into youtube for the high quality. Not sure it's much different, maybe a little clearer sound and picture. I think I'm getting a HD camera soon. http://youtube.com/watch?v=eLI4hLJm0mY Pypes O/R X and Mac cat-back __________________ 2003 Mach 1 5spd IUP YouTube.com/a707 MGW Shifter : SCT : Pypes O/R X : Magnapack cat-back : K&N Filter : Valentine 1 radar detector H&R SS Springs : Tokico D-specs : MM CC Plates : Brake Cooling Ducts : EBC Yellow Stuff Pads Street: Silver FR500 18x9 & 18x10 -- BFG KDW2 265/35 & 295/35 Track: Anthracite Shelby Torq-Thrust M 17x9 -- Falken RT615 275/40

07-21-2008, 10:50 AM	#275
Mustang9668 saving pennies Join Date: Apr 2008 Location: Griffin, Ga Posts: 836	Re: Insert Your Exhaust Sound Clips Here Sounds great. How is the ground clearance with the American Racing headers? Also do you think they are wide enough to get an auto trans out without pulling a header. __________________ 03 Mach 1--DSG auto, Kooks L/T's, Kooks o/r x, Borla Stinger catback, Roys spacer, JLT RAI, 17x9/10.5 AFS Mac wheels, 315 BFGs

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: