|
11-18-2007, 03:48 PM | #1 |
Slow :(
Join Date: Nov 2006
Location: Los Angeles
Posts: 252
|
Front Brakes How to:
Front COBRA, BULLITT, MACH1 brakes This is a very simple less than one hour job for everything. Pads: I recommend the motorcraft ones. They are anywhere from $95-$105 at most Auto supply stores or performance shops. Motorcraft Part # is BR12B or Ford's part # is 2U2Z-2V001-PA Jack the car up. Place a Jack stand at an appropriate place just incase the jack decides to go on vacation while you’re underneath the car at some point. These are self explanatory: Some of the tools needed to do the job...specially if you'll be replacing the rotors. The two 15mm bolts will require a breaker bar, a regular socket wrench and some lock-tite (thread locker) for when you're bolting things up.
__________________
Mods *BRAND NEW 2000 4.6L DOHC COBRA MOTOR w/ T45* 294.18 rwhp and 295.96 rwtq *MAC catback*H&R Springs*Front Bilsteins, w/ Tokico rear illuminas*8.8 w/ 3.55's*MM CC plates*Subframes*Cobra F&R Brakes* Last edited by 006; 10-28-2009 at 07:14 PM. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|