Tons of Stock parts and some aftermarket

[ajbonert]

Hello, I'm new to the site and I'm located in eastern Iowa. I have a 2003 Mach 1 that is being parted out along with a 96 GT and an 02 Gt getting parted out. Some parts are already sold but there are plenty still available. I will try to name as many parts as I can think of but feel free to text me or pm me in regards to other parts. My number is 563-258-2224 I can ship most parts and remember everything is negotiable so if I'm to high on price just make an offer and if you want pictures of anything specific feel free to ask.

Parts already sold:
96 mustang
-engine
03 Mach 1
-engine
-windshield
-shaker
-hood
-left front fender
-airbags
-one wheel
-pedals
-clutch cable
-headlight
-radiator
-radio bezel
-rear bumper
-sr intake and plenum
-stock Mach exhaust
-stock speakers

Parts available:
Mach 1
-trunk 200$
-taillights 50$
-rear end 500$.....SOLD
-four seats (drivers has some wear) 400$
-carpet 100$
-door panels 80$ each.....PASS SIDE SOLD
-doors 150$ each.....SOLD
-rims with 90% tread tires (only 3 available) 100$ each
-stock suspension 100$
-stock k member 100$
-headliner 100$
-a/c compressor 80$
-gauge cluster 150$.....SOLD
-upper and lower control arms 100$.....SOLD
-sway bars 100$
-tr-3650 (tail housing cracked) 150$.....SOLD
-driveshaft 100$.....SOLD
-flywheel 75$
-trans crossmember 50$.....SOLD
-some emblems
-Stock cams 75$ each
-lifters 75$ for all
-rockers 75$ for all
-manifolds 80$

96 Mustang
-Ceramic long tubes 400$
-stock manifolds 50$
-SLP loudmouth 350$
-four calipers, ceramic pads, drilled slotted 150$
-CAI 40$
-stock suspension 50$
-upper and lower control arms 50$
-springs 50$
-strut tower brace 100$
-sway bars 80$
-MSD coil packs 150$
-MSD 10mm plug wires (red) 80$
-Pi headswap kit 450$.....SOLD
-auto trans (with shift kit/torque converter/and valve body) 150$
-auto driveshaft 100$
-flexplate 50$
-non pi heads and cams 100$
-stock plenum and throttle body 60$
-pedals 50$

Also looking to possibly trade for these parts and these parts only.
-mach 1 CAI ram air style
-MAF (not oem)
-injectors (at least 35lbs)
-long tubes for mach one (I don't want painted)
-borla catbacks
-96 gt taillights
-downpipe from stock manifolds to catted x pipe
-drilled and slotted rotors