|
|
06-26-2013, 01:59 PM | #1 |
Registered User
Join Date: Aug 2009
Location: Halifax, Va.
Posts: 90
|
Evans waterless antifreeze
Has anyone on here tried using this waterless antifreeze? Claims to reduce hot spots, cavitation, detonation and reduce cooling system corrosion. If it does as claimed it should help with the #7 cylinder hot spot and will reduce corrosion in the cooling system.
|
06-27-2013, 09:12 AM | #2 |
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
|
Re: Evans waterless antifreeze
I have been using it for two years now , incredible stuff . Keeps the temps down . You must pull the drain plugs in block and use special additive to get all the water out , and then drain the additive . Expensive , but well worth it .
__________________
1331 RWHP 1296 RWTQ 28 PSI 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by DGR Racing DYNO KING |
06-27-2013, 11:17 AM | #3 |
700 HP Mach
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
|
Re: Evans waterless antifreeze
Ive seen a lot of terminator guys happy with it and Ive also seen that their water pump doesnt do much for us unless you simplify the cooling system some
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater |
06-27-2013, 12:17 PM | #4 | |
Registered User
Join Date: Aug 2012
Location: CA
Posts: 452
|
Re: Evans waterless antifreeze
Quote:
Freezes -40F Viscosity 2.3cp @ 212F that's magic in a container lol So if you were to drain out the block you wouldn't need to use his additive? |
|
06-27-2013, 01:38 PM | #5 |
Registered User
Join Date: Aug 2009
Location: Halifax, Va.
Posts: 90
|
Re: Evans waterless antifreeze
My understanding is that you have to flush the cooling system including the block to make sure all water has been removed. If not the benefits are severly hampered. It's really not an additive but a product that aids with flushing/removing water.
|
07-01-2013, 02:59 PM | #6 | |
Registered User
Join Date: Sep 2005
Location: Hydes Md.
Posts: 6,944
|
Re: Evans waterless antifreeze
Quote:
No it must be drained , this removes all water from system .
__________________
1331 RWHP 1296 RWTQ 28 PSI 5.3 liter 322.4 cu.in. Big Bore Stroker HP PNP Heads w/5 Angle Valve Job HP Custom Cams ATI Racing TH400 Cheetah SCS Air Assisted Shifter Strange 31 spline axles w/3:55 F1R Procharger w/Cog Set-up Magnafuel 750 -10AN Feed -8AN Return 200 Direct Wet w/MSD window switch & controller Big Stuff 3 w/Gen. 3 Pro EFI system Kooks 1.78 LTS 3" Custom Exhaust Tuning by DGR Racing DYNO KING |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|