|
|
Mustangs Parts For Sale/Wanted Looking for a Mustang or Part or have one for sale? Post it here! |
|
Thread Tools | Display Modes |
|
08-26-2004, 09:21 PM | #1 |
Wild About Stangs
Join Date: May 2004
Location: Cheshire, CT
Posts: 573
|
F.S. - Shifter Gasket Set for '03/'04 Mach 1
F.S. - PLUS Series shifter gasket set for the 2001+ TR-3650 aftermarket shifters. New double thickness (1/16"). This set will work for any 2001+ Mustang GT/Mach 1 aftermarket shifter such as the Pro 5.0, etc. An extra shifter handle gasket is included ($4.25 value), as well as a 2ml tube of Blue Threadlocker ($1.25 value). Cost: $16.99 a set including First Class Mail shipping with tracking number.
Other sets are available as well. Here is the full list for Mustangs. PLUS Series $16.99 - T-56 set $16.99 - TR-3650 set $16.99 - T-5 and T-45 set $16.99 - TKO-500/600 set $16.99 - TR-3550 TKO set $10.00 - Extra shifter handle gaskets (1/16") Payment by PayPal (cobrabob@cox.net) or mail a check to: Stang Shifter Gaskets, LLC 390 Chestnut Street Cheshire, CT 06410 Thanks!
__________________
2003 DSG Cobra (Sold) 504RWHP 494RWTQ http://stangshiftergaskets.com CobraBob's Shifter Gasket Set (new double thickness) Apten ported/polished blower 2.80" pulley with Diablo chip Dual Focus fuel pumps Magnaflow catted X-pipe Steeda catback Steeda TriAx shifter Accufab TB/Plenum Denso IT-22 plugs Last edited by CobraBob; 12-04-2014 at 07:18 PM. |
08-27-2004, 12:05 AM | #2 |
Flyin' Under the Radar
Join Date: Sep 2003
Location: Southern Pines, North Carolina
Posts: 320
|
I'll take'em.
__________________
03 Mustang MACH 1 Mods: MAF Screen & Air Silencer Delete K&N Air Filter Flowmaster "American Thunder" Exhaust System Magnaflow X-Pipe w/ Cats FRPP 4.10 Gears BBK Progressive Rate Lowering Springs Diablo Predator Performace Tuning PHP Intake Spacer IAC Restrictor Plate (Thanks to Mach1Canuck!) UPR "Blue Thunder" Shifter w/Billet stick Valentine Radar Detector XM "Roady2" Satellite Radio Lots of Zaino! "Traffic lights set at 35 mph are also set at 70 mph!" |
08-27-2004, 08:44 AM | #3 |
Registered User
Join Date: Feb 2004
Location: Harleysville, PA
Posts: 2,144
|
A thumbs up to CobraBob. Have the gaskets on mine and the trans is just as quiet as with the stock shifter!:THUMBSUP:
__________________
2003 Torch Red 5 spd w/ IUP Built: 7/16/03 |
08-27-2004, 10:09 AM | #4 |
Wild About Stangs
Join Date: May 2004
Location: Cheshire, CT
Posts: 573
|
I have other sets available if anyone needs one.
__________________
2003 DSG Cobra (Sold) 504RWHP 494RWTQ http://stangshiftergaskets.com CobraBob's Shifter Gasket Set (new double thickness) Apten ported/polished blower 2.80" pulley with Diablo chip Dual Focus fuel pumps Magnaflow catted X-pipe Steeda catback Steeda TriAx shifter Accufab TB/Plenum Denso IT-22 plugs |
08-27-2004, 10:45 AM | #5 |
Orange Peel
Join Date: Jan 2004
Location: Oklahoma
Posts: 1,494
|
A big :THUMBSUP: for Bob and the gasket kit. I purchased one for Steeda Tri-ax. Worked great and I do not have any of the annoying whine I have heard others talking about with their aftermarket shifter installs. I highly recommend this product and Bob.
__________________
Best times: 11/1/08 11.44 @ 121 (100 shot) DA corr 11.19 @ 124 11/1/08 12.31 @ 111 (NA) |
08-27-2004, 11:36 AM | #6 |
Wild About Stangs
Join Date: May 2004
Location: Cheshire, CT
Posts: 573
|
Thanks GRB60 and Mustangdude for the kind words!
__________________
2003 DSG Cobra (Sold) 504RWHP 494RWTQ http://stangshiftergaskets.com CobraBob's Shifter Gasket Set (new double thickness) Apten ported/polished blower 2.80" pulley with Diablo chip Dual Focus fuel pumps Magnaflow catted X-pipe Steeda catback Steeda TriAx shifter Accufab TB/Plenum Denso IT-22 plugs |
08-27-2004, 12:00 PM | #7 |
Five-Oh in a Oh-Three
Join Date: Apr 2004
Location: MA
Posts: 296
|
get these gaskets guys...they work! :THUMBSUP:
__________________
Jake Silver '03 Cobra Coupe Auto 9.82@135 w/ a 1.35 - Eaton only, NO Nitrous! 9.50@139 w/ a 1.30 - on the sauce **Click here for all my video's!!!** |
08-27-2004, 12:04 PM | #8 |
Wild About Stangs
Join Date: May 2004
Location: Cheshire, CT
Posts: 573
|
Thanks Jake!
__________________
2003 DSG Cobra (Sold) 504RWHP 494RWTQ http://stangshiftergaskets.com CobraBob's Shifter Gasket Set (new double thickness) Apten ported/polished blower 2.80" pulley with Diablo chip Dual Focus fuel pumps Magnaflow catted X-pipe Steeda catback Steeda TriAx shifter Accufab TB/Plenum Denso IT-22 plugs |
08-15-2011, 09:40 AM | #9 |
Registered User
Join Date: Jun 2011
Location: Lexington, NC
Posts: 29
|
Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
Just ordered a set for my Mach. Looks like the way to go. Paypal payment going your way.
|
09-19-2011, 10:05 PM | #10 |
Wild About Stangs
Join Date: May 2004
Location: Cheshire, CT
Posts: 573
|
Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
Hope you like the set. They really do work.
__________________
2003 DSG Cobra (Sold) 504RWHP 494RWTQ http://stangshiftergaskets.com CobraBob's Shifter Gasket Set (new double thickness) Apten ported/polished blower 2.80" pulley with Diablo chip Dual Focus fuel pumps Magnaflow catted X-pipe Steeda catback Steeda TriAx shifter Accufab TB/Plenum Denso IT-22 plugs |
09-28-2011, 03:33 PM | #11 |
Registered User
Join Date: Mar 2011
Location: Arleta Ca
Posts: 167
|
Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
just ordered a set myself.... planning on changing the fluid soon.
|
10-10-2011, 12:41 PM | #12 |
Wild About Stangs
Join Date: May 2004
Location: Cheshire, CT
Posts: 573
|
Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
DOUBLE THICKNESS GASKET SETS ARE NOW AVAILABLE!
In response to numerous requests over the past year, I am now offering all of my shifter gasket sets in a double thickness (1/16") material. Sets are available in the Original version and in the new PLUS version. My website has been updated with the new product line. The new PLUS version is more durable and even easier to install due to the thicker material. http://stangshiftergaskets.com/OrderShifterGaskets.htm
__________________
2003 DSG Cobra (Sold) 504RWHP 494RWTQ http://stangshiftergaskets.com CobraBob's Shifter Gasket Set (new double thickness) Apten ported/polished blower 2.80" pulley with Diablo chip Dual Focus fuel pumps Magnaflow catted X-pipe Steeda catback Steeda TriAx shifter Accufab TB/Plenum Denso IT-22 plugs |
08-27-2004, 12:16 PM | #13 |
Registered User
Join Date: Aug 2004
Location: Hume,IL
Posts: 69
|
is this a gasket that replaces RTV? is it made out of rubber or cork, and is it reusable?
__________________
2004 Mach 1 Black "sold" 1992 coupe turbo 4 "sold 1992 LX vert 1991 GT vert 1990 GT "sold" 1988 coupe 1987 coupe 1986 GT |
08-27-2004, 12:22 PM | #14 |
Wild About Stangs
Join Date: May 2004
Location: Cheshire, CT
Posts: 573
|
The set of gaskets is made from special high-temp silicone rubber just for this application. It does replace the silicone sealer you would normally use. The gasket is reuseable. Hope this helps. There is a picture of a T-56 set on my website if you want to see what the material looks like. The Mach 1 (TR-3650) gasket set is different of course.
http://www.cobrabob.com/
__________________
2003 DSG Cobra (Sold) 504RWHP 494RWTQ http://stangshiftergaskets.com CobraBob's Shifter Gasket Set (new double thickness) Apten ported/polished blower 2.80" pulley with Diablo chip Dual Focus fuel pumps Magnaflow catted X-pipe Steeda catback Steeda TriAx shifter Accufab TB/Plenum Denso IT-22 plugs |
08-27-2004, 12:29 PM | #15 |
Registered User
Join Date: Aug 2004
Location: Hume,IL
Posts: 69
|
Looks good, gonna try one, $$ on the way
__________________
2004 Mach 1 Black "sold" 1992 coupe turbo 4 "sold 1992 LX vert 1991 GT vert 1990 GT "sold" 1988 coupe 1987 coupe 1986 GT |
08-27-2004, 12:38 PM | #16 |
Wild About Stangs
Join Date: May 2004
Location: Cheshire, CT
Posts: 573
|
Got it! Your set will mail out today!
__________________
2003 DSG Cobra (Sold) 504RWHP 494RWTQ http://stangshiftergaskets.com CobraBob's Shifter Gasket Set (new double thickness) Apten ported/polished blower 2.80" pulley with Diablo chip Dual Focus fuel pumps Magnaflow catted X-pipe Steeda catback Steeda TriAx shifter Accufab TB/Plenum Denso IT-22 plugs |
08-27-2004, 03:28 PM | #17 |
I Am Cornholio!!!
Join Date: Aug 2003
Location: Republic of Texas
Posts: 3,745
|
Will send the $$ for a set later today. I have a MRT shifter installed with the "Right Stuff" gasket material with no problems but would like a set of these for the future if needed.
__________________
Black 03 5spd w/ IUP Born on 02/25/2003 (thanks Donna) Left home and moved onward 12/19/22 |
08-27-2004, 06:21 PM | #18 | |
Wild About Stangs
Join Date: May 2004
Location: Cheshire, CT
Posts: 573
|
Quote:
__________________
2003 DSG Cobra (Sold) 504RWHP 494RWTQ http://stangshiftergaskets.com CobraBob's Shifter Gasket Set (new double thickness) Apten ported/polished blower 2.80" pulley with Diablo chip Dual Focus fuel pumps Magnaflow catted X-pipe Steeda catback Steeda TriAx shifter Accufab TB/Plenum Denso IT-22 plugs |
|
08-27-2004, 06:38 PM | #19 |
American Muscle
Join Date: Feb 2004
Location: Kansas
Posts: 80
|
I already got mine from CobraBob a couple of weeks ago.
I just need a shifter now Funds are low right now.
__________________
Mark Anti-theft valve stem caps by Spincaps Mach 1 ID plates by Gary Loat Mach 1 floor mats by CDC 3/4" Shaker Scoop Extension by M1R "Gripper" trunk mat by Ssnake-Oyl Most of the Billet interior pieces from MGW Diablo Predator THE SURGEON GENERAL SAYS SMOKING RICE IS OK |
08-27-2004, 06:48 PM | #20 |
Wild About Stangs
Join Date: May 2004
Location: Cheshire, CT
Posts: 573
|
Mark, check the Market forum on svtperformance.com. There are always shifters for sale. You might find one for your Mach 1. Also check eBay periodically. I've seen deals there, too.
__________________
2003 DSG Cobra (Sold) 504RWHP 494RWTQ http://stangshiftergaskets.com CobraBob's Shifter Gasket Set (new double thickness) Apten ported/polished blower 2.80" pulley with Diablo chip Dual Focus fuel pumps Magnaflow catted X-pipe Steeda catback Steeda TriAx shifter Accufab TB/Plenum Denso IT-22 plugs |
08-27-2004, 06:56 PM | #21 | |
American Muscle
Join Date: Feb 2004
Location: Kansas
Posts: 80
|
Quote:
Thanks BobraBob!
__________________
Mark Anti-theft valve stem caps by Spincaps Mach 1 ID plates by Gary Loat Mach 1 floor mats by CDC 3/4" Shaker Scoop Extension by M1R "Gripper" trunk mat by Ssnake-Oyl Most of the Billet interior pieces from MGW Diablo Predator THE SURGEON GENERAL SAYS SMOKING RICE IS OK |
|
08-27-2004, 07:02 PM | #22 |
Wild About Stangs
Join Date: May 2004
Location: Cheshire, CT
Posts: 573
|
Glad to help Mark.
__________________
2003 DSG Cobra (Sold) 504RWHP 494RWTQ http://stangshiftergaskets.com CobraBob's Shifter Gasket Set (new double thickness) Apten ported/polished blower 2.80" pulley with Diablo chip Dual Focus fuel pumps Magnaflow catted X-pipe Steeda catback Steeda TriAx shifter Accufab TB/Plenum Denso IT-22 plugs |
08-27-2004, 07:08 PM | #23 |
Braderunna
Join Date: May 2004
Location: hampton, va
Posts: 4,949
|
Hey Cobrabob! I just paypal'ed ya! Thanks!
__________________
"Sparky"- 2003 Azure Blue w/MT and IUP Visit my garage on mach1mustang.org for details. |
08-27-2004, 07:16 PM | #24 | |
Wild About Stangs
Join Date: May 2004
Location: Cheshire, CT
Posts: 573
|
Quote:
__________________
2003 DSG Cobra (Sold) 504RWHP 494RWTQ http://stangshiftergaskets.com CobraBob's Shifter Gasket Set (new double thickness) Apten ported/polished blower 2.80" pulley with Diablo chip Dual Focus fuel pumps Magnaflow catted X-pipe Steeda catback Steeda TriAx shifter Accufab TB/Plenum Denso IT-22 plugs |
|
08-27-2004, 07:49 PM | #25 |
I Am Cornholio!!!
Join Date: Aug 2003
Location: Republic of Texas
Posts: 3,745
|
Payment sent, thanks!
__________________
Black 03 5spd w/ IUP Born on 02/25/2003 (thanks Donna) Left home and moved onward 12/19/22 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|