Austin Machs - 2003-04 Mach 1 Registry Owners Club

toad · 01-02-2008, 05:08 AM

I see some Machs around from time to time. ZY, BLK, DSG, SY, OW... funny but I haven't seen a TR or AB one around here yet.

There is a OW one here at Block House. I told him about the registry, but I don't think he has been here.

Then there is Rodney "Stangit" who turned me on to Central Texas Stangs.

Who else is out there?

Wouldn't it be a cool sight to get all the Machs on a cruise? Lots of great roads around here.

Keith.red.mach1 · 01-04-2008, 04:22 PM

I am in South Austin and work In San Marcos

I see a Black Mach, Red Mach, Ab and Orange all the time in San Marcos.

Would be nice to get a few together.

toad · 01-05-2008, 08:08 PM

Cool... let's keep this thread udated. Maybe a few more will chime in.

You like ice house style bars? Riley's on the backbone or Winstons. Not much on the north side I know of...

Icee · 01-05-2008, 09:06 PM

I'll be available as soon as I get the hell outta Knox and get home on leave which will be april time frame.

toad · 01-06-2008, 09:24 AM

Quote:

Originally Posted by Mach1Marauder

There's one OW that you better not mess with that goes to school there.

I hope he is a member and will post.

Big Ron · 01-06-2008, 08:52 PM

Not from Austin, but have gone down several times to the Saturday nite meets at 1431......kinda lost interest when they left and started going other places. Never could figure out where everyone was going. I enjoyed 1431 cause all the Mustangs (20 or so) would all park together and you could see a wide collection of cars along with 5 or 6 Vipers. We have a meet on the first Saturday of the month (Mar - Oct) here in Waco. Have had as many as 375 cars with usually 200+ cars. They play 50's music, have a 50/50 drawing, door prizes, etc......

Big Ron

jv7 · 01-06-2008, 10:40 PM

SY Mach here in Round Rock, the 1431 meet has been moved to 620 and I35(exit mile marker 252), right behind McDonalds. Pretty good turn out most of the time.

VoodooMACH · 01-10-2008, 01:09 AM

Quote:

Originally Posted by Mach1Marauder

There's one OW that you better not mess with that goes to school there.

better not be referring to my turd, it'd make a liar out of you if one of them tried to race me... hahaha, I do cruise around with the bottle cracked open though...

Bill I think I'm gonna get some dumped bullets, I'm tired of this quiet sleeper ****.. there's gotta be 15rwhp tied up in the rear section.

VoodooMACH · 01-15-2008, 11:19 AM

I love how my post silenced this thread...

Keith.red.mach1 · 01-15-2008, 05:42 PM

VooDoo, I never see you around here. What part of Austin do you live in?

KnightMach1 · 06-03-2008, 01:35 AM

This is my first post:

Hello to everyone, I live in South Austin. I just bought a 03 BLK Mach 1. So it look like the best place to hang out is 620/I35 at the McDonalds on Saturdays at 6-7pm.....?

Keith.red.mach1 · 06-03-2008, 09:12 AM

Where at in South Austin?

Anything done to the Mach 1 yet?

Hmbre97 · 07-10-2008, 05:53 PM

Anyone want to plan a Mach 1 meet at the 620 car show sometime in the next couple weeks? I finally got my trans rebuilt and will have the car on the road hopefully by next weekend.

ShakeMe · 07-10-2008, 06:58 PM

Pull my leg why don't you. A few of us are heading out to TAD tomorrow for a little run and fun night.

A trip to SAR is also in the planning stage for a Friday night. Since midnight madness is too crowded, we'll race until they kick us out then hang out later. I'm going to put on my DRs right now.

Keith.red.mach1 · 07-10-2008, 09:43 PM

I am all about the track or meeting up.

Post up when you guys plan to go and I am there.

Keith

bnorris · 07-13-2008, 04:49 PM

I live in Georgetown and work in round rock. I went to the car show in Waco yesterday and there was only 3 machs there! It would be great to get everyone together. I'm not sure about next weekend, but let me know when you guys want to met!
About the 12's:I do have a lot mod plans for my mach. Still deciding to either go all engine or SC. I just had my exhaust done, next is the clutch and the flywheel. I need to save money though. I have the parts but the labor kills you. I have a Spec Clutch and a Spec Alum. Flywheel. Also have a Tri-Ax shifter I need to install. Once that all done I'm goging to have Motion Dyamic Dyno Tune my car.
Hope to here from you guys soon!

toad · 11-30-2008, 11:00 PM

Anyone here used them?

http://www.promodularperformance.com/

I am planning on pro charging soon and I think I will choose them over Motion unless I hear something to make me rethink that.

Anyone use them, tell me what you think...

thanks

SHAKN' 04 · 01-06-2009, 04:43 PM

Anymore of the 620 meets? I went to a meet off of 183 and lakeline, too many F-bodys for my taste!

ShakeMe · 01-16-2009, 08:26 PM

Quote:

Originally Posted by SHAKN' 04

Anymore of the 620 meets? I went to a meet off of 183 and lakeline, too many F-bodys for my taste!

Just like the 1431 spot, kids got us kicked out of there. A few people were going to the "Y" at Oakhill but, for the distance it's not worth it for most. Another far out place is Cabela's in Buda. The owners gave permission to meet there as long as everyone minds their manners.

Keith.red.mach1 · 01-16-2009, 11:06 PM

Are the Cabelas neets on Saturdays?

ShakeMe · 01-16-2009, 11:12 PM

Quote:

Originally Posted by Keith.red.mach1

Are the Cabelas neets on Saturdays?

Yes.

toad · 03-13-2009, 09:58 AM

I think the weather is going to suck. But if it doesn't I will be at 620 tomorrow.

ShakeMe · 03-13-2009, 01:31 PM

Quote:

Originally Posted by toad

I think the weather is going to suck. But if it doesn't I will be at 620 tomorrow.

You're going to be all alone. The little idiots got us kicked out of the 620 months ago.

ShakeMe · 01-16-2009, 08:23 PM

Quote:

Originally Posted by toad

Anyone here used them?

http://www.promodularperformance.com/

I am planning on pro charging soon and I think I will choose them over Motion unless I hear something to make me rethink that.

Anyone use them, tell me what you think...

thanks

Motion Dynamics is out of business now.

01-02-2008, 05:08 AM	#1
toad the Night Man Join Date: Dec 2004 Location: Leander, TX Posts: 984	Austin Machs I see some Machs around from time to time. ZY, BLK, DSG, SY, OW... funny but I haven't seen a TR or AB one around here yet. There is a OW one here at Block House. I told him about the registry, but I don't think he has been here. Then there is Rodney "Stangit" who turned me on to Central Texas Stangs. Who else is out there? Wouldn't it be a cool sight to get all the Machs on a cruise? Lots of great roads around here. __________________ I plan ahead. That way, I don't have to do anything right now. SY Mach1\|FRPP 4:10 gears\|Kenny Brown welded subframe connectors\|BMR upper/lower Control Arms\|PHP intake spacer\|MAFIA MAF extender\|Procharger P1SC-2\|KOOKs Longtubes\|KOOKs catted X\|Borla STINGER cat-back\|Pro 5.0 shifter/MGW handle/MRT Yellow ball\|26 spl PMP/T3650\|Performance Cobra clutch\|Fidanza/Anderson aluminum flywheel\|MM quadrant/adjuster

01-04-2008, 04:22 PM	#2
Keith.red.mach1 Registered User Join Date: Nov 2003 Location: League City, TX Posts: 922	Re: Austin Machs I am in South Austin and work In San Marcos I see a Black Mach, Red Mach, Ab and Orange all the time in San Marcos. Would be nice to get a few together.

01-05-2008, 08:08 PM	#3
toad the Night Man Join Date: Dec 2004 Location: Leander, TX Posts: 984	Re: Austin Machs Cool... let's keep this thread udated. Maybe a few more will chime in. You like ice house style bars? Riley's on the backbone or Winstons. Not much on the north side I know of... __________________ I plan ahead. That way, I don't have to do anything right now. SY Mach1\|FRPP 4:10 gears\|Kenny Brown welded subframe connectors\|BMR upper/lower Control Arms\|PHP intake spacer\|MAFIA MAF extender\|Procharger P1SC-2\|KOOKs Longtubes\|KOOKs catted X\|Borla STINGER cat-back\|Pro 5.0 shifter/MGW handle/MRT Yellow ball\|26 spl PMP/T3650\|Performance Cobra clutch\|Fidanza/Anderson aluminum flywheel\|MM quadrant/adjuster

01-05-2008, 09:06 PM	#4
Icee Registered User Join Date: Jul 2007 Location: Bavaria, Germany Posts: 166	Re: Austin Machs I'll be available as soon as I get the hell outta Knox and get home on leave which will be april time frame. __________________ 04' torch red (sold)...4.30's, FRPP aluminum driveshaft, MAC long tubes, C&L cold air, MAC O/R H-pipe, Flowmaster catback, Roys' phenolic intake spacer, drop in K&N filter, Lakewood traction action bars, M/T et streets, SCT flip chip with custom tunes, NX kit. Mustang dyno 309 whp 349 wtq n/a , 100 shot 426 whp 413 wtq 03' dsg....bone stock

01-06-2008, 08:52 PM	#6
Big Ron Original 03 TR Owner Join Date: Apr 2004 Location: Waco, TX Posts: 2,860	Re: Austin Machs Not from Austin, but have gone down several times to the Saturday nite meets at 1431......kinda lost interest when they left and started going other places. Never could figure out where everyone was going. I enjoyed 1431 cause all the Mustangs (20 or so) would all park together and you could see a wide collection of cars along with 5 or 6 Vipers. We have a meet on the first Saturday of the month (Mar - Oct) here in Waco. Have had as many as 375 cars with usually 200+ cars. They play 50's music, have a 50/50 drawing, door prizes, etc...... Big Ron

01-06-2008, 10:40 PM	#7
jv7 Registered User Join Date: Jan 2004 Location: Round Rock, TX Posts: 950	Re: Austin Machs SY Mach here in Round Rock, the 1431 meet has been moved to 620 and I35(exit mile marker 252), right behind McDonalds. Pretty good turn out most of the time.

01-15-2008, 11:19 AM	#9
VoodooMACH sittin in a parking lot.. Join Date: Jan 2005 Location: Katy/Austin, TX Posts: 1,418	Re: Austin Machs I love how my post silenced this thread... __________________ 03 Oxford white Mach... SOLD

01-15-2008, 05:42 PM	#10
Keith.red.mach1 Registered User Join Date: Nov 2003 Location: League City, TX Posts: 922	Re: Austin Machs VooDoo, I never see you around here. What part of Austin do you live in?

06-03-2008, 01:35 AM	#11
KnightMach1 Registered User Join Date: Jun 2008 Location: Austin, Texas Posts: 4	Re: Austin Machs This is my first post: Hello to everyone, I live in South Austin. I just bought a 03 BLK Mach 1. So it look like the best place to hang out is 620/I35 at the McDonalds on Saturdays at 6-7pm.....?

06-03-2008, 09:12 AM	#12
Keith.red.mach1 Registered User Join Date: Nov 2003 Location: League City, TX Posts: 922	Re: Austin Machs Where at in South Austin? Anything done to the Mach 1 yet?

07-10-2008, 05:53 PM	#13
Hmbre97 Eaton swapped User Join Date: Dec 2005 Location: Austin, TX Posts: 771	Re: Austin Machs Anyone want to plan a Mach 1 meet at the 620 car show sometime in the next couple weeks? I finally got my trans rebuilt and will have the car on the road hopefully by next weekend. __________________ -Herb- 03 Torch Red Mach 1

07-10-2008, 06:58 PM	#14
ShakeMe Registered User Join Date: Nov 2003 Location: TX. Posts: 2,511	Re: Austin Machs Pull my leg why don't you. A few of us are heading out to TAD tomorrow for a little run and fun night. A trip to SAR is also in the planning stage for a Friday night. Since midnight madness is too crowded, we'll race until they kick us out then hang out later. I'm going to put on my DRs right now. __________________ 03 Mach DSG Build Date 07/25/03 Feb 09 N2O 10.91 @ 124.21(1.55 60ft) Feb 09 NA 11.85 @ 112.87 (1.60 60ft)

07-10-2008, 09:43 PM	#15
Keith.red.mach1 Registered User Join Date: Nov 2003 Location: League City, TX Posts: 922	Re: Austin Machs I am all about the track or meeting up. Post up when you guys plan to go and I am there. Keith __________________ Keith 2003 TR Mach BBK Long Tubes/O/R H pipe Magnapack catback with Spintechs JLT RAI intake, Nitto Drag Radials P&P Intake w/ 3/8 intake spacer SCT tune by Don @ LaSota Racing Steeda Triax ,Centerforce Clutch

07-13-2008, 04:49 PM	#16
bnorris Registered User Join Date: Dec 2007 Location: Georgetown, Texas Posts: 54	Re: Austin Machs I live in Georgetown and work in round rock. I went to the car show in Waco yesterday and there was only 3 machs there! It would be great to get everyone together. I'm not sure about next weekend, but let me know when you guys want to met! About the 12's:I do have a lot mod plans for my mach. Still deciding to either go all engine or SC. I just had my exhaust done, next is the clutch and the flywheel. I need to save money though. I have the parts but the labor kills you. I have a Spec Clutch and a Spec Alum. Flywheel. Also have a Tri-Ax shifter I need to install. Once that all done I'm goging to have Motion Dyamic Dyno Tune my car. Hope to here from you guys soon!

11-30-2008, 11:00 PM	#17
toad the Night Man Join Date: Dec 2004 Location: Leander, TX Posts: 984	Pro Modular Performance Anyone here used them? http://www.promodularperformance.com/ I am planning on pro charging soon and I think I will choose them over Motion unless I hear something to make me rethink that. Anyone use them, tell me what you think... thanks __________________ I plan ahead. That way, I don't have to do anything right now. SY Mach1\|FRPP 4:10 gears\|Kenny Brown welded subframe connectors\|BMR upper/lower Control Arms\|PHP intake spacer\|MAFIA MAF extender\|Procharger P1SC-2\|KOOKs Longtubes\|KOOKs catted X\|Borla STINGER cat-back\|Pro 5.0 shifter/MGW handle/MRT Yellow ball\|26 spl PMP/T3650\|Performance Cobra clutch\|Fidanza/Anderson aluminum flywheel\|MM quadrant/adjuster

01-06-2009, 04:43 PM	#18
SHAKN' 04 Registered User Join Date: Jan 2008 Location: Kyle, Texas Posts: 2,285	Re: Austin Machs Anymore of the 620 meets? I went to a meet off of 183 and lakeline, too many F-bodys for my taste! __________________ SOLD04' Mach 1 -Comp Cams 106100's (deg 106/110) -Eatonswap with 3.4 Pulley -Full Exhaust (mac lts & xpipe, sss terminator c/b) -Built Rear w/ 3.55 gears [B]-Tuned by Lethal Performance of San Antonio -510hp/478tq

01-16-2009, 11:06 PM	#20
Keith.red.mach1 Registered User Join Date: Nov 2003 Location: League City, TX Posts: 922	Re: Austin Machs Are the Cabelas neets on Saturdays? __________________ Keith 2003 TR Mach BBK Long Tubes/O/R H pipe Magnapack catback with Spintechs JLT RAI intake, Nitto Drag Radials P&P Intake w/ 3/8 intake spacer SCT tune by Don @ LaSota Racing Steeda Triax ,Centerforce Clutch

03-13-2009, 09:58 AM	#22
toad the Night Man Join Date: Dec 2004 Location: Leander, TX Posts: 984	Re: Austin Machs I think the weather is going to suck. But if it doesn't I will be at 620 tomorrow. __________________ I plan ahead. That way, I don't have to do anything right now. SY Mach1\|FRPP 4:10 gears\|Kenny Brown welded subframe connectors\|BMR upper/lower Control Arms\|PHP intake spacer\|MAFIA MAF extender\|Procharger P1SC-2\|KOOKs Longtubes\|KOOKs catted X\|Borla STINGER cat-back\|Pro 5.0 shifter/MGW handle/MRT Yellow ball\|26 spl PMP/T3650\|Performance Cobra clutch\|Fidanza/Anderson aluminum flywheel\|MM quadrant/adjuster

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)