70 Mach 1 351 Cleveland car, Barn Find Part II - 2003-04 Mach 1 Registry Owners Club

mustangjohnny · 07-31-2009, 02:46 PM

1970 Mustang Mach 1 For Sale
351 "M" code, 4v, 4 speed, shaker, louvres, a/c, foldown rear seat, Traction lock, and Factory tach. All backed by Marti report.
This car is a clean, tight, car. It was found in a hanger where it has spent the last 10 years. Fairly solid car with light rust in battery tray, passenger floor pan, and pass quarter. Starts runs and drives (light tick from pass side rear, lifter), car has a cam and long tube headers, power steering has lost alot of assist but makes no noise, shifts smooth, original Ford Hurst shifter and correct knob(changed since photo). Trac lock still grabs, Most of shaker is there (including vac motor) with the exception of flapper door, snorkel and heat shields (long tube headers). All a/c under dash is there, but only compressor and bracket are present under the hood. Console is gone but I am rounding up a '69 one. All guages, tach, speedo, turn signals work. Fold down is all there and works flawless, rear trap door has speakers screwed into it but this is reproduced now, rim blo horn works flawless.
15k obo
Johnny

mustangjohnny · 07-31-2009, 03:00 PM

more pics

mustangjohnny · 07-31-2009, 05:09 PM

ooooooh, I almost forgot, it is an original Dark Ivy Green car......Close to the Dark Highland Green of a Bullitt Mustang....like this
Johnny

Mach1 EH · 08-01-2009, 07:49 AM

u guys are killing me.

I'm moving next month have no $$s to negotiate and hope to be in a better position in the spring.

I am posting here to keep an 'eye' on this one and hopin' you'll post when it sells.

Bill Hamilton · 08-01-2009, 09:31 AM

Quote:

Originally Posted by Mach1 EH

u guys are killing me.

I'm moving next month have no $$s to negotiate and hope to be in a better position in the spring.

I am posting here to keep an 'eye' on this one and hopin' you'll post when it sells.

Ray, hang in there. When you get ready to pull the trigger, Chris and I will have your back and be on the lookout.

Mach1 EH · 08-02-2009, 08:17 AM

Quote:

Originally Posted by Bill Hamilton

Ray, hang in there. When you get ready to pull the trigger, Chris and I will have your back and be on the lookout.

& it is GREATLY appreciated!

:ORANGE:

ZOG · 08-05-2009, 07:28 PM

Quote:

Originally Posted by Mach1 EH

u guys are killing me.

I'm moving next month have no $$s to negotiate and hope to be in a better position in the spring.

I am posting here to keep an 'eye' on this one and hopin' you'll post when it sells.

BUY IT!!

jbrad88 · 08-05-2009, 07:31 PM

I would love to have that car. Problem is I would want to drive it every day...except really nasty rainy ones...

I would have to return it to its original color though...

One day...maybe...

Naa-V-Doc · 08-04-2009, 08:08 PM

Quote:

Originally Posted by mustangjohnny

1970 Mustang Mach 1 For Sale
351 "M" code, 4v, 4 speed, shaker, louvres, a/c, foldown rear seat, Traction lock, and Factory tach. All backed by Marti report.
This car is a clean, tight, car. It was found in a hanger where it has spent the last 10 years. Fairly solid car with light rust in battery tray, passenger floor pan, and pass quarter. Starts runs and drives (light tick from pass side rear, lifter), car has a cam and long tube headers, power steering has lost alot of assist but makes no noise, shifts smooth, original Ford Hurst shifter and correct knob(changed since photo). Trac lock still grabs, Most of shaker is there (including vac motor) with the exception of flapper door, snorkel and heat shields (long tube headers). All a/c under dash is there, but only compressor and bracket are present under the hood. Console is gone but I am rounding up a '69 one. All guages, tach, speedo, turn signals work. Fold down is all there and works flawless, rear trap door has speakers screwed into it but this is reproduced now, rim blo horn works flawless.
15k obo
Johnny

----------------------------------------------------------------
What do you honestly feel it would take to clean, patch and paint her back to orig.?

mustangjohnny · 08-04-2009, 09:20 PM

Quote:

Originally Posted by Naa-V-Doc

----------------------------------------------------------------
What do you honestly feel it would take to clean, patch and paint her back to orig.?

I had figured I would need to put around 8-10k into it to get there....I figure it would be worth around 30 when of was done, maybe more the way it's optioned
Johnny

Naa-V-Doc · 08-05-2009, 03:04 PM

Thanks -

08-01-2009, 07:49 AM	#4
Mach1 EH original owner Join Date: Jun 2003 Location: Bethany, Ontario Posts: 3,758	Re: 70 Mach 1 351 Cleveland car, Barn Find Part II u guys are killing me. I'm moving next month have no $$s to negotiate and hope to be in a better position in the spring. I am posting here to keep an 'eye' on this one and hopin' you'll post when it sells. __________________ 2003 Mach1 DSG - original owner (1 of 1595) IUP, MGW black locking fuel door, sequential flashers, K&N, Mach1 scuff plates, ID tags, MRT shifter, Borla cat back, Steeda full length subframe connectors, 3pt STB, AFS black chrome Mach1 Heritage 17 x 9 & 17 x 10.5 shoes, MRT hood struts. BIRTHDATE - 04/09/2003 ,<-- thx Donna 2012 Shelby GT500 Perf white, SVT PP (SVT Track Pack), Electronics Package, Borla exhaust

08-05-2009, 07:31 PM	#8
jbrad88 Original Owner Join Date: Apr 2003 Location: Houston, Texas Posts: 5,172	Re: 70 Mach 1 351 Cleveland car, Barn Find Part II I would love to have that car. Problem is I would want to drive it every day...except really nasty rainy ones... I would have to return it to its original color though... One day...maybe... __________________ JB 03 Torch Red Mach 1 21 FJG Mach 1 Stainless Steel Systems Adrenaline Series BBK long tube headers catted x pipe 18x9 18x10- Solid Gloss Black FR5's Nitto 555 g2 275/35r18's 285/35r18 MGW Shifter With Mach1 Shift Knob 4.10's & 31 spline Mosers and 31 Spline Posi Steeda Sport Springs Tokiko Illuminas J@M weight Jacker LCA's J@M Rear UCA's J@M Braided steel brake lines Eibach Sway Bars

08-05-2009, 03:04 PM	#11
Naa-V-Doc Registered User Join Date: Feb 2008 Location: USA Posts: 1,006	Re: 70 Mach 1 351 Cleveland car, Barn Find Part II Thanks -

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)