|
|
General Registry Discussion Topics of Interest (Mach 1 Related or otherwise) for discussions that don't fit other forums. |
|
Thread Tools | Display Modes |
|
02-17-2018, 10:37 AM | #1 |
Original Owner
Join Date: Apr 2003
Location: Houston, Texas
Posts: 5,172
|
2018 Plans for your car.
Just out of curiosity...what is everyone planning for their Mach's this year. I know i go into every year with something of a plan (subject to change as i go of course).
Since I basically rebuilt the suspension last year, did ac lines and dryer, wheels and tire upgrade, and replaced the fuel pump after it took a dump...this year's focus for me is on the cosmetics and trim pieces that have seen better days. 15 year old window tinting finally started having some issues, so getting that re-done today. Planning on, new headlights carpet needs replacement replace the driver side switch panel insert (cracked) Seriously looking at the SVE Fr500 steering wheel (would like anyones 2c on that by the way) replace window switch on the passenger side door. Wish list... Front Seat covers Stereo Upgrade (already have a good head unit in the car) Anyway, just focusing on trying to get the old girl's cosmetics up to speed this year... of course...never know what mechanical things may crop up...but...
__________________
JB 03 Torch Red Mach 1 21 FJG Mach 1 Stainless Steel Systems Adrenaline Series BBK long tube headers catted x pipe 18x9 18x10- Solid Gloss Black FR5's Nitto 555 g2 275/35r18's 285/35r18 MGW Shifter With Mach1 Shift Knob 4.10's & 31 spline Mosers and 31 Spline Posi Steeda Sport Springs Tokiko Illuminas J@M weight Jacker LCA's J@M Rear UCA's J@M Braided steel brake lines Eibach Sway Bars |
02-17-2018, 11:35 AM | #2 |
And Leadfoot
Join Date: Sep 2004
Location: Easy Street
Posts: 6,468
|
Re: 2018 Plans for your car.
I only plan on driving mine more. With only 37K on it, nothing needs replaced. I put 6K on last year. Try and put 5K on this year. It's way more enjoyable driving the Mach in Iowa than it was in Seattle. The traffic and amount of idiots is far fewer.
__________________
'23 Fighter Jet Gray Mach 1 (Automatic, 470hp/410tq) '04 Azure Blue Mach 1 (5Spd., 305hp/320tq) '17 Blue Streak Dodge Ram 1500 Quad Cab 4X4 (Automatic, 395hp/410tq) "She's An Underage Angel With A Dented Halo"-She Needs Rock n Roll---Motley Crue Every now and then, say What The F***. What The F***, gives you freedom. With freedom comes opportunity. Opportunity, makes your future. If you can't say it.......you can't do it.----Miles |
02-17-2018, 11:45 AM | #3 |
Original Owner
Join Date: Apr 2003
Location: Houston, Texas
Posts: 5,172
|
Re: 2018 Plans for your car.
wish mine was still that low mileage. but...unfortunately I had to use her as a daily for about 6 years...
__________________
JB 03 Torch Red Mach 1 21 FJG Mach 1 Stainless Steel Systems Adrenaline Series BBK long tube headers catted x pipe 18x9 18x10- Solid Gloss Black FR5's Nitto 555 g2 275/35r18's 285/35r18 MGW Shifter With Mach1 Shift Knob 4.10's & 31 spline Mosers and 31 Spline Posi Steeda Sport Springs Tokiko Illuminas J@M weight Jacker LCA's J@M Rear UCA's J@M Braided steel brake lines Eibach Sway Bars |
02-17-2018, 01:32 PM | #4 |
Registered User
Join Date: Feb 2017
Location: Springfield
Posts: 24
|
Re: 2018 Plans for your car.
Swap the 4r70 for a 6r80. New suspension, k member and coil overs. That’s it for this year.
|
02-20-2018, 01:27 PM | #5 |
Registered User
Join Date: Mar 2017
Location: Tucson, Az
Posts: 160
|
Re: 2018 Plans for your car.
Have a long list, but this is going to take more then 1 year to complete. Hopefully the engine gets done by the end of summer.
Engine rebuilt Paint New carpet New seats New tint CD player Wheels maybe FR500's Short throw MGW New suspension What was unfortunate about driving it every day?
__________________
1st: 1998 v6 2nd: 2000 GT Current: 2003 Mach 1 |
02-17-2018, 01:56 PM | #6 |
Psycho Dog is Psycho
Join Date: Sep 2008
Location: Lewisville, TX
Posts: 1,990
|
Re: 2018 Plans for your car.
going to need a new set of tires when mine comes out of storage this spring/summer.
|
02-17-2018, 08:30 PM | #7 |
Greg Fonger
Join Date: May 2004
Location: Ontario, Canada
Posts: 3,416
|
Re: 2018 Plans for your car.
Have to decide to drive it more or sell it!
Last year I did not even put it on the road and the year before I drove it maybe 50 to 100 miles.. bought it brand new #feelsbadman.. |
02-17-2018, 11:09 PM | #8 |
700 HP Mach
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
|
Re: 2018 Plans for your car.
New shocks/struts
Set of 15” rear wheels with some sticky *** tires Get the tune finalized and some dyno numbers Make a few passes (haven’t run it in like 9 years and 400hp less) Put the 99/01 cobra front bumper on and have the front 1/3 of the car sprayed HID retrofits I might also take out this lethal fuel system and go with a Fore setup
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater |
02-18-2018, 01:09 AM | #9 |
Registered User
Join Date: Dec 2015
Location: Sierra Vista, AZ
Posts: 132
|
Re: 2018 Plans for your car.
Plan on going the forced induction route this year.
- P-1X Procharger Kit & Dyno Tune - Kooks Long Tube Headers & Catted X-Pipe - Replace Rear Tires with Nitto NT555 G2s Next year, I'll focus on aesthetics (fresh paint job, replace worn out plastic parts, and Mach 1 vinyl decals). Bigger brakes to help slow down the Mach.
__________________
2004 Ford Mustang Mach 1 (DSG), Borla Stingers Catback, C&L CAI, SCT X4 Custom Tune, Black Chrome Rovos Durban Wheels (18x9 F, 18x10.5 R) on Nitto NT05s (275/35/18 F, 295/35/18 R), Pioneer AVH-4200NEX Receiver, MM C/C Plates, Rolled Rear Fenders, Eibach Sportlines/Struts/Shocks, Raxiom Smoked Taillights/Third Brake Light/LED Bulbs, Clear Headlights w/ Black Housing, Polished Aluminum Interior Accents, 30% Window Tint, Tinted Side Markers, Carbon Fiber Valve Stem Caps, Black Shorty Antenna |
02-18-2018, 07:30 AM | #10 |
Registered User
Join Date: Nov 2008
Location: Haymarket, VA
Posts: 532
|
Re: 2018 Plans for your car.
First things first....got a spot in the garage cleared out to park it. I have a few maintenance items on the list....new rotors and pads; and my battery cable posts have finally bit the dust....need to replace those.
Would love to get my hands on some AFS deep dish 17's....and it needs a paint job bad. Been putting it off for a while, but now that I've got dedicated garage space, I need to stop putting it off. |
02-18-2018, 08:32 AM | #11 | |
Original Owner
Join Date: Apr 2003
Location: Houston, Texas
Posts: 5,172
|
Re: 2018 Plans for your car.
Quote:
__________________
JB 03 Torch Red Mach 1 21 FJG Mach 1 Stainless Steel Systems Adrenaline Series BBK long tube headers catted x pipe 18x9 18x10- Solid Gloss Black FR5's Nitto 555 g2 275/35r18's 285/35r18 MGW Shifter With Mach1 Shift Knob 4.10's & 31 spline Mosers and 31 Spline Posi Steeda Sport Springs Tokiko Illuminas J@M weight Jacker LCA's J@M Rear UCA's J@M Braided steel brake lines Eibach Sway Bars |
|
02-18-2018, 09:31 AM | #12 | |
700 HP Mach
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
|
Re: 2018 Plans for your car.
Quote:
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater |
|
03-01-2019, 12:51 PM | #13 | ||
Psycho Dog is Psycho
Join Date: Sep 2008
Location: Lewisville, TX
Posts: 1,990
|
Re: 2018 Plans for your car.
Quote:
^ have to do this Quote:
_ |
||
03-04-2019, 12:26 PM | #14 |
Registered User
Join Date: Mar 2017
Location: Tucson, Az
Posts: 160
|
Re: 2018 Plans for your car.
Started up the car a week and a half ago. Started pulling the driver side valve cover so I can see what the knock is. Hope it's not a rod, but still need to get one bolt on the brake booster off....fingers crossed.
__________________
1st: 1998 v6 2nd: 2000 GT Current: 2003 Mach 1 |
03-04-2019, 04:37 PM | #15 |
mach everthing
Join Date: Aug 2006
Location: vancover british columbia
Posts: 715
|
Re: 2018 Plans for your car.
DRIVE IT!!!!!!!!!!
my car has been mia for 8 years. finely got it back late last summer. few bugs left but she does run and move.
__________________
If yur not first yur last! Was 03 mach 1 white automatic 295.1 rwhp 321 ft rwtq accufab throttle body c and L true flow intake tube bassani catted x pipe slp lm1 (after dyno) steeda full lenth sfc kb jacking rails matrix brace steeda front back strut braces ** Update coming soon ** |
02-18-2018, 03:24 PM | #16 |
Registered User
Join Date: Nov 2017
Location: Hopinsville
Posts: 163
|
2018 Plans for your car.
Complete the rebuilt engine, and install.
Dial in tune. Get the Terminator IRS and install it. New catback. Paint work done. All the incredibly tacky “mods” taken off. All painted interior parts paint back stock. Get Cobra ambers. Really idiotic that a 33k mile car can be in the shape it’s in. But I’ll get her running good and looking pretty again. Many more things planned but I can only do so much this year. Very eager to get her on the road, never driven a Mach 1 before. And I’m really looking forward to popping that cherry with my own Mach 1. 😊 Pick your poison. |
02-18-2018, 05:20 PM | #17 |
Moderating at Mach 1
Join Date: Aug 2002
Location: Baton Rouge, La.
Posts: 16,278
|
Re: 2018 Plans for your car.
Resolve some paint issues, Replace the wiper cowl.Deal with whatever Gremlins rear their ugly head.
__________________
Krewe de la Mach Rouge #340804 13th Mach 1 built 11/07/02 Build Date 12/13/02 Delivery |
02-18-2018, 08:53 PM | #18 |
Original Owner
Join Date: Apr 2003
Location: Houston, Texas
Posts: 5,172
|
Re: 2018 Plans for your car.
[QUOTE=falcongtho3;1629987]Resolve some paint issues, Replace the wiper cowl.Deal with whatever Gremlins rear their ugly head.
[/QUOTE I understand gremlins....
__________________
JB 03 Torch Red Mach 1 21 FJG Mach 1 Stainless Steel Systems Adrenaline Series BBK long tube headers catted x pipe 18x9 18x10- Solid Gloss Black FR5's Nitto 555 g2 275/35r18's 285/35r18 MGW Shifter With Mach1 Shift Knob 4.10's & 31 spline Mosers and 31 Spline Posi Steeda Sport Springs Tokiko Illuminas J@M weight Jacker LCA's J@M Rear UCA's J@M Braided steel brake lines Eibach Sway Bars |
02-19-2018, 08:30 AM | #19 |
Registered User
Join Date: Mar 2008
Location: derry nh
Posts: 302
|
Re: 2018 Plans for your car.
Going to finally add some HP Had the motor built 2 years ago, and now feel it is ready for some spray. Would like to go pro charger but way to expensive. Someday that will happen
__________________
lifes to short to race anything else |
02-19-2018, 04:19 PM | #20 | |
Registered User
Join Date: Mar 2007
Location: Brookhaven, PA
Posts: 591
|
Re: 2018 Plans for your car.
Quote:
__________________
Mach1 items for sale. PM for photos/info. Pickup/meet only - I'll be at Carlisle! Hawks HPS pads, front/rear G-Stop front SS brakelines |
|
02-19-2018, 08:16 PM | #21 |
Can't be bridled
Join Date: Sep 2007
Location: Texas
Posts: 7,006
|
Re: 2018 Plans for your car.
I had one, as well, in my hci 94 GTS. It was awesome. I've got an 03 cobra wheel in the Mach. It's a nice upgrade too.
__________________
2004 Mach 1 #6956 5spd w/IUP Eaton swap, longtubes, built 3.73 SRA 452hp/409tq dynojet🏁 |
03-06-2018, 10:03 PM | #22 |
2003 AB Mach 1
Join Date: Jul 2011
Location: SW Pennsylvania
Posts: 872
|
New wheels.
Sent from my SM-G930V using Tapatalk |
03-07-2018, 10:03 AM | #23 |
Lorraine's driver
Join Date: Apr 2012
Location: Indianapolis, IN
Posts: 2,442
|
Nice! 18”? IG: @ab_mach1
__________________
|
03-07-2018, 01:11 PM | #24 |
Original 03 TR Owner
Join Date: Apr 2004
Location: Waco, TX
Posts: 2,860
|
Re: 2018 Plans for your car.
I had the hood and front bumper repainted in November to take care of rock chips from being driven daily. It pretty much just gets driven twice a week now. They removed hood and bumper and blended into the fenders. Cost was $2200.00 including replacing the hood stripes. Work was next to perfect. One of the employees used to work for 50Resto and they put a new front spoiler on at no charge for me.
Next to do this year are shocks / struts, complete brake job with new rotors, replace serpentine belt along with tuneup and fuel filter. In the fall I'll do oil change and coolant flush. I got a "hotwheels logo" badge (from a 2013 Camaro Special Edition) and I'm trying to decide where to put it.
__________________
Big Ron Original Owner
2003 Torch Red Mach 1 Automatic w/IUP VIN: 1FAFP42R93F396607 Built: 2/28/03 - Bought: 4/07/03 w/8 miles Build #: 2461 of 9652 (1 of 460 in Torch Red w/auto & IUP) Best Mach 1 Engine Award: 2006 & 2013 @ Bullitt / Mach 1 Shootout Class Winner 1999 - 2004: 2011 FFW @ Texas Motorplex |
03-07-2018, 06:11 PM | #25 |
Super Moderator
Join Date: Sep 2003
Location: Houston (Crosby), Texas
Posts: 6,689
|
Re: 2018 Plans for your car.
Since my build is complete, I need to adjust the new Flaming River steering linkage, install the new clutch cable and install new a/c lines. Most important, I need to drive it. Car has just a tick over 25,000 miles.
__________________
2003 Dark Shadow Gray Mach 1 5.3L Stroker - FR500 Intake - Boss330 Heads 4.56 Gears - Kooks LTs - SCT Tune - Bassani X/Catback 2004 Silver Metallic Cobra 2.3 Whipple - 60lb injectors -Twin FGT Pumps 8 gauge/BAP/FPDM - JLT - Bassani Catted X / Catback - SCT PRP - 4# Lower - 3.50/3.00 Uppers - 19/24 PSI 2017 White Shelby F150 2.9L Whipple _______________ |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|