|
|
Mustangs Parts For Sale/Wanted Looking for a Mustang or Part or have one for sale? Post it here! |
|
Thread Tools | Display Modes |
|
07-31-2006, 08:09 PM | #1 |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
ABS Pump Delete Brake Manifold
If interested in removing the ABS pump for 94-2010 Mustang GT/Cobra/Mach 1/V-6, let me know and I will machine the delete manifold to replace the ABS pump without having to re-plumb and flare lines. The factory ABS pump can be re-installed down the road if desired. THIS IS FOR OFF ROAD USE ONLY. http://www.prbmachining-absdeletemanifolds.com/
These manifolds are machined out of T-6061 aluminum and weigh (98-04) 0.32lbs. (94-97) 0.5lbs. The 98-04 ABS pump & bracket weighs 9.7lbs. The 94-97 ABS pump & bracket weighs 13.5 lbs. Links below shows pictures of 94-97 ABS Delete Manifolds Cobra/GT: http://i101.photobucket.com/albums/m.../absblock1.jpg http://www.mach1registry.org/forums/...3&postcount=73 Link below shows a 98 ABS Delete for GT/Cobra (which is unique) with a line lock mounted to the side. http://forums.corral.net/forums/show...34&postcount=8 Links below shows pictures of 99-04 ABS Delete Manifold for GT/Cobra/Mach 1/2001 Bullitt GT: http://www.moddedmustangs.com/forums...ml#post3434080 http://i297.photobucket.com/albums/m...R/DSCF0037.jpg http://www.mach1registry.org/forums/...6&postcount=17 http://i160.photobucket.com/albums/t...t/100_3275.jpg
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ Last edited by Phil; 06-08-2018 at 02:33 PM. |
08-01-2006, 01:33 AM | #2 |
Registered User
Join Date: May 2006
Location: Alvin, TX
Posts: 932
|
Re: ABS Pump Delete Brake Manifold
Does this convert it to manual brakes?????
__________________
13 Mustang GT 5.0 Deep Impact Blue 6 spd 04 Mach 1 OW 5 spd 89 5.0 LX Hatch Auto, bone stock |
08-01-2006, 04:40 AM | #3 | |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: ABS Pump Delete Brake Manifold
Quote:
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
|
08-01-2006, 08:44 AM | #4 |
Registered User
Join Date: May 2006
Location: Alvin, TX
Posts: 932
|
Re: ABS Pump Delete Brake Manifold
So what does it do then?
__________________
13 Mustang GT 5.0 Deep Impact Blue 6 spd 04 Mach 1 OW 5 spd 89 5.0 LX Hatch Auto, bone stock |
08-01-2006, 09:15 AM | #5 | |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: ABS Pump Delete Brake Manifold
Quote:
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
|
08-02-2006, 04:28 PM | #6 | |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: ABS Pump Delete Brake Manifold
Quote:
http://www.mach1registry.org/forums/...6&postcount=17 http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMESE%3AIT
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ Last edited by Phil; 08-02-2006 at 05:18 PM. |
|
08-02-2006, 07:39 PM | #7 | |
Registered User
Join Date: Mar 2004
Location: Acton, Ma
Posts: 190
|
Re: ABS Pump Delete Brake Manifold
Quote:
Quick question, where does the manifold bolt up to? Thanks
__________________
2004 Mach 1 Azure Blue Automatic 12.06 1/4 7.640 1/8 1.645 60 ft 112.34 mph New England Dragway Modified # 713 Special Thanks to Mike Dez Racing and Tube Chassis Designz |
|
08-01-2006, 09:52 AM | #8 | |
1/4 Mile Drags Moderator
Join Date: Aug 2003
Location: Guntersville, AL
Posts: 2,630
|
Re: ABS Pump Delete Brake Manifold
Quote:
I'll probably be getting one of these from you in the near future. I need to get my new axles/c-clip eliminators/etc install going 1st though... |
|
08-01-2006, 03:15 PM | #9 | |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: ABS Pump Delete Brake Manifold
Quote:
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
|
08-07-2006, 07:51 PM | #10 |
semi-pro moderator
Join Date: May 2004
Location: Virginia Beach
Posts: 4,955
|
Re: ABS Pump Delete Brake Manifold
Quick question, is there a way to shut off the ABS light? Or do ya just deal with it?
__________________
2004 Mach 1 IUP/5spd/DSG Engine, etc done...sits in the garage |
08-07-2006, 07:57 PM | #11 | |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: ABS Pump Delete Brake Manifold
Quote:
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
|
08-07-2006, 09:46 PM | #12 | |
semi-pro moderator
Join Date: May 2004
Location: Virginia Beach
Posts: 4,955
|
Re: ABS Pump Delete Brake Manifold
Quote:
__________________
2004 Mach 1 IUP/5spd/DSG Engine, etc done...sits in the garage |
|
08-08-2006, 08:48 PM | #13 |
Registered User
Join Date: Aug 2004
Location: kansas city, ks.
Posts: 1,123
|
Re: ABS Pump Delete Brake Manifold
You might have to live with that light Phil. My ABS light comes on each time I start the engine and drive it for 3 miles or more, and stays on until I turn off the engine and restart it, at which time it resets itself, only to come on again within 3 miles of driving. The reason that this happens with my car is because I have the ET Streets on, and the ABS asensors are not reading the same speed at all wheels due to the difference in size on the front/rear tires. You can always take out the bulb if needed though, since you are no longer ABS equipped anyways. I asked my tuner about turning off the light and he told me that he couldn't.
__________________
04 Mach1 5-spd, NOS (100 shot), goes 11.7's in the 1/4 |
08-08-2006, 08:52 PM | #14 | |
semi-pro moderator
Join Date: May 2004
Location: Virginia Beach
Posts: 4,955
|
Re: ABS Pump Delete Brake Manifold
Quote:
__________________
2004 Mach 1 IUP/5spd/DSG Engine, etc done...sits in the garage |
|
08-09-2006, 05:56 AM | #15 | |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: ABS Pump Delete Brake Manifold
Quote:
Your right, my ABS light has been on since last year when I pulled the rear sensors & exciter rings. Earlier this year I pulled the fuse to ABS pump & now just recently removed the pump. I may just remove the bulbs, I have the air bag & abs light that stay on all the time.
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
|
10-26-2007, 11:35 PM | #16 |
Registered User
Join Date: Nov 2003
Location: Schertz, TX
Posts: 2,639
|
Re: ABS Pump Delete Brake Manifold
If any of you guys put on one of these and have no use for your ABS controller (the eletronic part, not the physical part the manifold replaces), I'm interested in one. My ABS turns it's self off erratically and my Ford brake tech thinks its the controller.
__________________
Zinc yellow NMRA Factory Stock configuration Coyote 5.0 engine, FRPP Control Pack and a bunch of other stuff. Best ET in this configuration 10.693@123 |
10-28-2007, 02:07 AM | #17 |
Registered User
Join Date: Jun 2004
Location: Garden Grove, CA
Posts: 394
|
Re: ABS Pump Delete Brake Manifold
OK Phil, I'm in the market for one. With the 9" install went the ABS sensors and rings. May as well ditch 8+ lbs off the front of the car. Please let me know! Thanks.
Robert
__________________
03 Mach, Black, original auto, T56 as of 4/1/10 NA - 12.36@108.52 w/ 1.740 60' @ Fontana 1/15/06 N2O - 10.98@120.64 w/ 1.54 60' @ Famoso 11/17/07 |
10-28-2007, 10:16 AM | #18 | |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: ABS Pump Delete Brake Manifold
Quote:
Rob, OK, I'll contact you by PM! I don't have any made up now, I will have to purchase some T-6061 stock.
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
|
10-28-2007, 10:42 AM | #19 |
Sold & Parting Out
Join Date: Oct 2007
Location: Palm Beach Gardens, FL
Posts: 1,164
|
Re: ABS Pump Delete Brake Manifold
hey phil,
i cetrainly want one for my mach...im just trying to find some spare time to take pics of that 96 cobra pump for you too...thanks!
__________________
04 AB 5sp IUP Every Bolt-On Imaginable Full Tubular Drag Suspension Moser 35-Spline, Spool, C-Elim's, 4.88's, etc. Zex 100 Shot SCT by Justin @ VMP Tuning 15x10 Beadlock & 17x4.5 Aluma-Star 2.0's M/T 28x10.5 ET Drags Massive Diet = 2950 lbs stock: 408hp, 438tq on 100 shot: 11.03 @ 127.3 Aluma-Star's 4 SALE Best Offer Al Papitto built ~11.5:1, .020 over Teksid, custom Comp cams, custom CP domed pistons, ported heads/intake by Kris Starnes 513hp, 410tq on 100 shot: 10.79 @ 133.1 |
07-25-2008, 02:50 AM | #20 |
Registered User
Join Date: Jul 2008
Location: Santo Domingo, D.R.
Posts: 1
|
Re: ABS Pump Delete Brake Manifold
Excuse me Phil,
I have a 1994 Ford Mustang GT (actually stroked to 347 and blown), my ABS module is not working so i might as well remove it since it only adds extra weight. I also have a friend with the same problem in a 1995 Mustang GT. I am very interested in ordering two of your ABS Module Delete. My email is greg_guzman24@hotmail.com. Please contact me as to all the available information to the Delete module as well as the instructions for purchasing two of them. Thanks, Greg |
07-25-2008, 09:21 PM | #21 |
KOOL-A1D
Join Date: Oct 2007
Location: Orlando, FL
Posts: 18
|
Re: ABS Pump Delete Brake Manifold
About six months since i have had mine and it works absolutely flawlessly.
__________________
-1996 Mystic Cobra 11.57 @117 stock motor stock tranny stock rear .55/.37 nitrous jets |
07-26-2008, 01:15 PM | #22 |
Registered User
Join Date: Jan 2004
Location: san diego, ca
Posts: 1,461
|
Re: ABS Pump Delete Brake Manifold
I have one from Phil but plans changed for the car & I'm not going to use it. A very nice part by the way. It's still in the original package. PM me for pricing.
__________________
'03 Mach, Oxford White, 5-spd, Eaton '03 Mach, Black, automatic (parting out) '98 GT, 410w, C4, Vortech |
07-26-2008, 01:39 PM | #23 | |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: ABS Pump Delete Brake Manifold
Thanks for your order Frank.
Quote:
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
|
08-17-2008, 12:42 PM | #24 |
Registered User
Join Date: Aug 2008
Location: wichita, ks
Posts: 7
|
Re: ABS Pump Delete Brake Manifold
I need one for my 1994 Mustang GT.
|
08-19-2008, 03:29 PM | #25 |
Nitrous Junkie
Join Date: Jul 2003
Location: Ohio
Posts: 7,299
|
Re: ABS Pump Delete Brake Manifold
Sorry, I did not see this post. My PayPal account is: pbastian@adelphia.net
Once I recieve the money, I will get it machined and in the mail in about 2 weeks. Thanks!
__________________
Phil PRB Machining, LLC http://www.prbmachining-absdeleteman...com/index.html Performance mods by Jeff Chambers, the owner/tuner of CRT Performance in Norwalk, Ohio http://www.crt-performance.com/ |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|