Salvaged Mach 1 - 2003-04 Mach 1 Registry Owners Club

SIrRicCuS · 05-21-2008, 07:41 PM

What's going on everyone... I'm parting out my Mach 1 that was totaled last Monday. Everything is going to be parted out from this thing. I guess they totaled it because of the fact that the airbags went off and because of the severe body damage. The drivers side rear wheel was also tagged slightly so I don't believe it to be in a good enough condition to sell it, but the tires are all brand new. That being said, the drivers side rear fender, rear bumper, and trunk all have damage from the accident. The hood also has a deep series of 4 scratches on a section 4 inches by 3 inches on the front passengers side. Every other body panel is in good condition. The entire interior is also in good condition and will be sold.

Aftermarket parts

Bassani Stainless Steel Cat-Back [$400]
http://www.lethalperformance.com/bassani-ss-x-pipe-w-cats-smanual.html
Bassani Stainless Steel Catted X-Pipe [$400] sold
http://www.lethalperformance.com/bassani-stainless-bolt-on-exhaust-w-35-tips.html
K&N Inlet Pipe & K&N FIPK Cold Air Intake [$150]
http://www.lethalperformance.com/k-and-n-aircharger-performance-kit-03-04-mach-1.html
Steeda Tri-Ax Short Throw Shifter [$100] sold
http://www.lethalperformance.com/steeda-tri-ax-for-tr-3650.html
Cobra Bob Shifter Gasket [Brand new and comes with shifter] sold
http://www.stangshiftergaskets.com/products.htm
Eibach Pro-Kit Springs [$125]
http://www.americanmuscle.com/eibach...-04-coupe.html

And the rest of the car is up for grabs too...

Entire interior sold
Mach 460 System sold
Cowl panel between windshield and hood sold
Eibach Pro Kit Springs sold
Engine sold
Mach 1 grill delete sold
Calipers sold
CCRM sold
FPDM sold
Windshield sold
Rear ABS sensors sold
Shaker system
Sail panels with quarter glass sold
Side scoops
Spoiler
Drivers door sold
Passenger door
Bumper cover
Fog lights
Head lights
ECU sold
Entire wiring harness sold
Fuel system minus rails/injectors/FPDM/CCRM sold
Electric radiator fan sold
Radiator sold

Please note that buyer will pay for shipping.

Azure Blurr · 05-21-2008, 07:54 PM

Sorry to hear about the Mach. Been a while since we've seen you as well.

Mach1Man04 · 05-21-2008, 07:56 PM

hows the chin spoiler???

c0nfl1kt · 05-21-2008, 08:05 PM

Are those prices shipped?

Azure Blurr · 05-21-2008, 08:09 PM

Quote:

Originally Posted by SIrRicCuS

Please note that buyer will pay for shipping.[/B]

Quote:

Originally Posted by c0nfl1kt

Are those prices shipped?

aaaa

ken03w/mach1 · 05-21-2008, 08:13 PM

sent a pm

TorchedMach1 · 05-21-2008, 09:35 PM

PM Sent

blown03Mach1 · 05-21-2008, 10:20 PM

Please PM me a price for the shifter bezel.

Mach97 · 05-22-2008, 12:37 AM

Pm sent

c0nfl1kt · 05-22-2008, 12:42 AM

Was any of the cat back damaged by the accident?

SIrRicCuS · 05-22-2008, 02:10 AM

Quote:

Originally Posted by c0nfl1kt

Was any of the cat back damaged by the accident?

The drivers side tip was snapped off and was hanging because the damage to the bumper, but I intend on having both tips welded on by a muffler shop.

Navymailman · 05-22-2008, 02:21 AM

I want the spare tire for my other Mustang. Plus I might be very interested in the springs. Send me an email with a price on the spare. No shipping here, I'll pick up the parts myself.

Thanks.

WC_Racer · 05-22-2008, 11:25 AM

1UP?? I buy it if you have it.

SIrRicCuS · 05-22-2008, 12:51 PM

All PM's replied to!

blown03Mach1 · 05-22-2008, 02:28 PM

Quote:

Originally Posted by SIrRicCuS

All PM's replied to!

Not all. I never recieved a PM regarding the shifter bezel. Was it an IUP?

Mister L · 05-22-2008, 02:55 PM

got a shaker bottom?

SIrRicCuS · 05-22-2008, 03:05 PM

Quote:

Originally Posted by blown03Mach1

Not all. I never recieved a PM regarding the shifter bezel. Was it an IUP?

Sorry about that. Shifter bezel is already sold. My apologies.

SIrRicCuS · 05-22-2008, 03:06 PM

Quote:

Originally Posted by Mister L

got a shaker bottom?

Shaker is going to be sold as a whole if possible. If that doesn't work out, I'll part it out. Thanks!

WC_Racer · 05-22-2008, 03:36 PM

I'll take the gas in the gas tanks. Thanks. 20 bucks? Sold.

cobramach1 · 05-22-2008, 03:38 PM

still waiting to hear back on my pm for a small part?

sonicboom · 05-22-2008, 04:06 PM

PM sent for door pieces and Driver side seat belt assembly.

bigjohnsonDOHC · 05-22-2008, 04:22 PM

pm sent

gilmoujr · 05-22-2008, 04:27 PM

How is the brake light from the deck lid? Also, is the rear wing okay? Both of these are scratched on my Mach and I have been thinking of replacing them.

05-22-2008, 06:25 PM

Pm Sent!!

SIrRicCuS · 05-22-2008, 06:35 PM

Quote:

Originally Posted by WC_Racer

I'll take the gas in the gas tanks. Thanks. 20 bucks? Sold.

No ****, huh? LMAO

05-21-2008, 07:41 PM	#1
SIrRicCuS Whippled Cobra Slayer Join Date: Sep 2006 Location: Orange, CA Posts: 983	Salvaged Mach 1 What's going on everyone... I'm parting out my Mach 1 that was totaled last Monday. Everything is going to be parted out from this thing. I guess they totaled it because of the fact that the airbags went off and because of the severe body damage. The drivers side rear wheel was also tagged slightly so I don't believe it to be in a good enough condition to sell it, but the tires are all brand new. That being said, the drivers side rear fender, rear bumper, and trunk all have damage from the accident. The hood also has a deep series of 4 scratches on a section 4 inches by 3 inches on the front passengers side. Every other body panel is in good condition. The entire interior is also in good condition and will be sold. Aftermarket parts Bassani Stainless Steel Cat-Back [$400] http://www.lethalperformance.com/bassani-ss-x-pipe-w-cats-smanual.html Bassani Stainless Steel Catted X-Pipe [$400] sold http://www.lethalperformance.com/bassani-stainless-bolt-on-exhaust-w-35-tips.html K&N Inlet Pipe & K&N FIPK Cold Air Intake [$150] http://www.lethalperformance.com/k-and-n-aircharger-performance-kit-03-04-mach-1.html Steeda Tri-Ax Short Throw Shifter [$100] sold http://www.lethalperformance.com/steeda-tri-ax-for-tr-3650.html Cobra Bob Shifter Gasket [Brand new and comes with shifter] sold http://www.stangshiftergaskets.com/products.htm Eibach Pro-Kit Springs [$125] http://www.americanmuscle.com/eibach...-04-coupe.html And the rest of the car is up for grabs too... Entire interior sold Mach 460 System sold Cowl panel between windshield and hood sold Eibach Pro Kit Springs sold Engine sold Mach 1 grill delete sold Calipers sold CCRM sold FPDM sold Windshield sold Rear ABS sensors sold Shaker system Sail panels with quarter glass sold Side scoops Spoiler Drivers door sold Passenger door Bumper cover Fog lights Head lights ECU sold Entire wiring harness sold Fuel system minus rails/injectors/FPDM/CCRM sold Electric radiator fan sold Radiator sold Please note that buyer will pay for shipping. __________________ '04 SVT Cobra: Weekend Warrior. '04 Mach 1: R.I.P. '04 GT: Sold. '07 R1: Daily Driver. Last edited by SIrRicCuS; 08-05-2008 at 06:34 PM.

05-21-2008, 07:54 PM	#2
Azure Blurr I miss my friend Join Date: Jul 2006 Location: Middle Georgia Posts: 6,020	Re: Salvaged Mach 1 Sorry to hear about the Mach. Been a while since we've seen you as well. __________________ “Freedom itself was attacked this morning by a faceless coward and freedom will be defended.” “We will not tire, we will not falter, and we will not fail,” -George W. Bush

05-21-2008, 07:56 PM	#3
Mach1Man04 Rock out wit yer Mach out Join Date: Jan 2007 Location: East Haven,Connecticut Posts: 880	Re: Salvaged Mach 1 hows the chin spoiler??? __________________ 2004 Screaming Yellow Mach 1: 5-Spd IUP: 1 of 624 Born On Date 11-26-03 -MGW Short Shifter -CobraBob's Shifter Gasket -JLT Ram Air -MAC O/R ProChamber -SLP LM1s -IAC Restrictor Plate -Black Bumper Inserts -20% Tints -Had Visus Louvers, now they live on the highway "Having a 700whp Honda is like coming out of the closet, shocking at first, but still gay" http://i34.tinypic.com/1zfueio.jpg

05-21-2008, 08:13 PM	#6
ken03w/mach1 Registered User Join Date: Apr 2008 Location: White Marsh, MD Posts: 520	Re: Salvaged Mach 1 sent a pm

05-21-2008, 09:35 PM	#7
TorchedMach1 TorchedMach1 Join Date: Mar 2006 Location: Phoenix, AZ Posts: 798	Re: Salvaged Mach 1 PM Sent __________________ Arizona's Fastest Mach 1 *11.14 @ 120 w/ 1.48 60'* 3300 lbs With Driver GO-FAST MODS O/R H-Pipe Magnaflow Catback K&N FIPK GEN II Roy's Composite Spacer T-56 6 Speed Liberty 26 Spline Input Shaft Steeda Tri-Ax Spec Stage 3+ Clutch Aluminum Flywheel Aluminum Driveshaft Built 31 Spline Rear w/ 4.30's Rear upper and Lower Control Arms NX Wet Kit (100 Shot) SCT Chip Custom Tune by Devin @ www.performancesolutionracing.com

05-21-2008, 10:20 PM	#8
blown03Mach1 8LB YNER Join Date: Mar 2005 Location: Tampa Posts: 5,661	Re: Salvaged Mach 1 Please PM me a price for the shifter bezel. __________________ Just because you're winnin' Don't mean you're the lucky ones TR 2003 (Jezebel) sold Mar 12...

05-22-2008, 12:37 AM	#9
Mach97 Budget Snake!! Join Date: Jan 2008 Location: Baltimore, MD Posts: 238	Re: Salvaged Mach 1 Pm sent __________________ 1997 Pacific Green Coupe Built Teksid, Ported 03/04 Heads, Comp 106360's, VMP TVS, Cobra Jet TB, T56, 3.55's 2004 Screamin Yellow Coupe (Under Construction) Boss 323ci Stroker, Ported Heads, Comp 106460's, Whipple, Gen 3 Killer Chiller, Magnapack 3", SRA 3.27's

05-22-2008, 02:21 AM	#12
Navymailman Registered User Join Date: May 2005 Location: Santa Clarita, CA Posts: 693	Re: Salvaged Mach 1 I want the spare tire for my other Mustang. Plus I might be very interested in the springs. Send me an email with a price on the spare. No shipping here, I'll pick up the parts myself. Thanks. __________________ J. Ybarra 2003 DSG Mach 1 http://i52.photobucket.com/albums/g2...zeWizard-3.jpg

05-22-2008, 11:25 AM	#13
WC_Racer Registered User Join Date: Jan 2008 Location: Honolulu, HI Posts: 261	Re: Salvaged Mach 1 1UP?? I buy it if you have it.

05-22-2008, 12:51 PM	#14
SIrRicCuS Whippled Cobra Slayer Join Date: Sep 2006 Location: Orange, CA Posts: 983	Re: Salvaged Mach 1 All PM's replied to! __________________ '04 SVT Cobra: Weekend Warrior. '04 Mach 1: R.I.P. '04 GT: Sold. '07 R1: Daily Driver.

05-22-2008, 02:55 PM	#16
Mister L Don't squeeze the Charmin Join Date: Sep 2003 Location: OKC, OK Posts: 1,036	Re: Salvaged Mach 1 got a shaker bottom? __________________ Mister L 03 Black 6-speed

05-22-2008, 03:36 PM	#19
WC_Racer Registered User Join Date: Jan 2008 Location: Honolulu, HI Posts: 261	Re: Salvaged Mach 1 I'll take the gas in the gas tanks. Thanks. 20 bucks? Sold.

05-22-2008, 03:38 PM	#20
cobramach1 Fear begins with 'FE' Join Date: Jun 2007 Location: Orion Twp, MI Posts: 1,930	Re: Salvaged Mach 1 still waiting to hear back on my pm for a small part? __________________ '08 Shelby GT500 Black w/Alloy stripes '02 F250 Super Duty, 7.3L Power Stroke, 4x4, Extended Cab, Long Bed '70 Mach 1 Yellow/Black interior, 427 Medium Riser FE, Manual C6 '70 Mach 1 White/Vermillion interior, 351C 2v, Auto, A/C, needs restoration '70 Mach 1 Calypso Coral/Black interior, 351C 4v, Auto, very rusty parts car '69 Mach 1 Indian Fire Red/Black interior, R code 428CJ, 4spd, needs restoration

05-22-2008, 04:06 PM	#21
sonicboom Registered User Join Date: Dec 2003 Location: Sumner, Washington Posts: 34	Re: Salvaged Mach 1 PM sent for door pieces and Driver side seat belt assembly. __________________ Past Mustangs:1978 Mach 1, 1990 GT Current Mustangs: 1993 Red Cobra 39500 miles 2000 V6 Green Coupe 2004 Orange Mach 1 built 10-1-03 and purchased on Halloween

05-22-2008, 04:22 PM	#22
bigjohnsonDOHC Registered User Join Date: Apr 2008 Location: Auburn, MA Posts: 315	Re: Salvaged Mach 1 pm sent __________________ 2003 Black Mach 1 -SLP LM1, KN intake, subframe connectors, UPR x-pipe w/ high flow cats

05-22-2008, 04:27 PM	#23
gilmoujr Mach out with my Cach out Join Date: Apr 2004 Location: Dexter City, OH Posts: 714	Re: Salvaged Mach 1 How is the brake light from the deck lid? Also, is the rear wing okay? Both of these are scratched on my Mach and I have been thinking of replacing them. __________________ 2004 Mustang Mach 1 (DSG) Born 02/04 - Adopted 04/15/04 NMRA #MM-7456 N/A Best Time: 60 ft: 1.693; 1/4: 12.499 @ 110.47 Stock Suspension, JLT, Diablosport MO Tune, 4.10's, Moser Axles (31), Catted-X, BFG 275/40r17 N2O Best Time: 60 ft: 1.661; 1/4: 11.748 @ 117.00 Above plus Zex 125 shot & MT DR 275/40r17 www.Powerhouse411.com \| www.ModularMisfits.com

05-22-2008, 06:25 PM	#24
nikbait Guest Posts: n/a	Re: Salvaged Mach 1 Pm Sent!!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)