Vortech V1-SI Kit - 2003-04 Mach 1 Registry Owners Club

McQueen_z71 · 11-23-2015, 01:35 AM

Looking to sell this kit as a whole or trade for a single turbo setup. The kit is in good condition. Headunit has no play in the shaft along with no nicks or damage in or around the compressor wheel housing. Great kit, but just looking to upgrade to something else, Turbo or Whipple.
If local sale, I have no problem helping with install.
Asking price for sale is 2800.
Don't have pictures at the moment, but I will have some posted soon after my posting.
You can find my dyno video on "Brothers Performance" fb Page. Should be the 7th video (Comp Orange Mach 1)

Vortech V1-SI Headunit
4v bracket
All bolts, brackets, spacers and instructions
Vortech coolant crossover pipe
Oil feed & return (return separate or with already tapped oil pan)
Front mount intercooler with piping
Blow thru maf
Sct BA2400 maf
Vortech Mini Race BOV
Stock sized pulley
2 slightly smaller pullies
3" riechard racing pulley

Made 483/445
Fuel pumps were the only thing hindering it from going higher along with the stock Mach 1 block.

pnypwr289 · 11-24-2015, 08:52 PM

Does it come with injectors?

roosh725 · 11-25-2015, 06:28 PM

Location?

McQueen_z71 · 11-27-2015, 10:27 PM

Quote:

Originally Posted by pnypwr289

Does it come with injectors?

No injectors included. That would be your choice along with pumps. The Maf will cover you for a good while.

McQueen_z71 · 11-27-2015, 10:28 PM

Quote:

Originally Posted by roosh725

Location?

Near Michigan City, IN.

Mach1686 · 12-02-2015, 06:12 AM

So all you would need is a pump and injectors to make this a complete kit? Does this kit require relocation of any thing under the hood or does it just bolt right up? Very interested, Thanks

Mach828 · 12-02-2015, 01:42 PM

Only thing that might be missing from the sound is the water pump pulley. Other than that, sounds complete. Good deal.

McQueen_z71 · 12-03-2015, 01:23 PM

Quote:

Originally Posted by Mach1686

So all you would need is a pump and injectors to make this a complete kit? Does this kit require relocation of any thing under the hood or does it just bolt right up? Very interested, Thanks

yup that's all you will need. All paper instructions are there to make things easier. You can get a aftermarket water pump pulley or just mod one like I did. Just had to take the large lip off of the stock one.

McQueen_z71 · 12-03-2015, 01:27 PM

https://www.facebook.com/BrothersPer...3171132000166/

Hopefully this link works. This is when I was getting the tune done.

pnypwr289 · 12-05-2015, 12:32 PM

Can you get some pics?

McQueen_z71 · 12-05-2015, 01:28 PM

Pending sale at this time, but I will have some pictures up beginning of the week.

11-23-2015, 01:35 AM	#1
McQueen_z71 Registered User Join Date: Mar 2014 Location: South Bend,IN Posts: 105	Vortech V1-SI Kit Looking to sell this kit as a whole or trade for a single turbo setup. The kit is in good condition. Headunit has no play in the shaft along with no nicks or damage in or around the compressor wheel housing. Great kit, but just looking to upgrade to something else, Turbo or Whipple. If local sale, I have no problem helping with install. Asking price for sale is 2800. Don't have pictures at the moment, but I will have some posted soon after my posting. You can find my dyno video on "Brothers Performance" fb Page. Should be the 7th video (Comp Orange Mach 1) Vortech V1-SI Headunit 4v bracket All bolts, brackets, spacers and instructions Vortech coolant crossover pipe Oil feed & return (return separate or with already tapped oil pan) Front mount intercooler with piping Blow thru maf Sct BA2400 maf Vortech Mini Race BOV Stock sized pulley 2 slightly smaller pullies 3" riechard racing pulley Made 483/445 Fuel pumps were the only thing hindering it from going higher along with the stock Mach 1 block. __________________ 04 Competition Orange Mach 1

11-24-2015, 08:52 PM	#2
pnypwr289 Registered User Join Date: Jun 2013 Location: willimantic Posts: 118	Re: Vortech V1-SI Kit Does it come with injectors?

12-02-2015, 06:12 AM	#6
Mach1686 Registered User Join Date: Dec 2015 Location: Pittsburgh PA Posts: 1	Re: Vortech V1-SI Kit So all you would need is a pump and injectors to make this a complete kit? Does this kit require relocation of any thing under the hood or does it just bolt right up? Very interested, Thanks

12-02-2015, 01:42 PM	#7
Mach828 Dark Knight Join Date: Nov 2009 Location: Albuquerque, NM Posts: 5,759	Re: Vortech V1-SI Kit Only thing that might be missing from the sound is the water pump pulley. Other than that, sounds complete. Good deal. __________________ Vortech V2 S-trim, E85, A2A Treadstone, Comp cams, built engine, full exhaust, built rear, built 4r70, more mods. Tuned by me with SCT Advantage

12-03-2015, 01:27 PM	#9
McQueen_z71 Registered User Join Date: Mar 2014 Location: South Bend,IN Posts: 105	Re: Vortech V1-SI Kit https://www.facebook.com/BrothersPer...3171132000166/ Hopefully this link works. This is when I was getting the tune done. __________________ 04 Competition Orange Mach 1

11-25-2015, 06:28 PM	#3
roosh725 Registered User Join Date: Jul 2010 Location: schaumburg, il Posts: 87	Location?

12-05-2015, 12:32 PM	#10
pnypwr289 Registered User Join Date: Jun 2013 Location: willimantic Posts: 118	Re: Vortech V1-SI Kit Can you get some pics?

12-05-2015, 01:28 PM	#11
McQueen_z71 Registered User Join Date: Mar 2014 Location: South Bend,IN Posts: 105	Re: Vortech V1-SI Kit Pending sale at this time, but I will have some pictures up beginning of the week. __________________ 04 Competition Orange Mach 1

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)