|
04-19-2014, 06:53 PM | #1 |
A.D.D. FTL
Join Date: Oct 2006
Location: Jacksonville, FL
Posts: 3,017
|
Rotorpros drilled/slotted
Like them? Hate them? Looks like a nice little upgrade to make for the Mach at 64,000 miles now. They have silver, black, and gold zinc. I bet they all look pretty **** good! For DD, I am guessing plain ol Hawk ceramics would work just fine?
|
04-19-2014, 09:27 PM | #2 |
saving pennies
Join Date: Apr 2008
Location: Griffin, Ga
Posts: 1,487
|
Re: Rotorpros drilled/slotted
I've been using Rotorpros for about 5 years now. The latest set I bought was the black drilled/slotted rotors. I certainly wouldn't use them for auto-x, but for a dd car they work just fine. I have no complaints with them at all. I bought the rotor/pads combo from stang mods and the pads they include dust like crazy so check around about what kind of pads you use.
__________________
03 Mach 1--Auto, 4000 stall, 96 cobra intake cams, 4.10s, ARH L/T's, off road X, Moser 31 spline axles, Eaton Posi diff., MM FLSFC, Tokico D-Specs, k&n filter, 17x9/10.5s AFS Mac wheels 03 Cobra--18x9/10.5 TSW Nurburgring Wheels, Nitto NT05's 275/295, Stiegemeier ported, 2.87” pulley, Canton 9-qt oil pan, Spec Stage II clutch, MM coilovers, Bilstein Shocks/Struts, LFP heat exchanger, LFP radiator, Evans cooling system, 14" Brembo 4 Piston calipers, 470whp, 460ft-lbs |
04-20-2014, 04:01 PM | #3 |
Can't be bridled
Join Date: Sep 2007
Location: Texas
Posts: 7,006
|
Re: Rotorpros drilled/slotted
My rotorpros slotted rotors and hawk hps pads work well. No real complaints other than a ring of rust around the rotor hat where the pads don't make contact. But that's not really anyone's fault. For the money I spent, I am happy. Car stops well.
__________________
2004 Mach 1 #6956 5spd w/IUP Eaton swap, longtubes, built 3.73 SRA 452hp/409tq dynojet🏁 |
04-20-2014, 10:12 PM | #4 |
'03 Torch Red
Join Date: Feb 2013
Location: NJ
Posts: 269
|
Re: Rotorpros drilled/slotted
They work well for me, I ordered them directly from them with pads. They were recommended to me on this forum, of course after I posted that I got them people gave me horror stories lol. So far so good though, I do not race so I am sure they will never see their full potential.
|
04-22-2014, 10:18 PM | #5 |
Registered User
Join Date: Nov 2011
Location: Jersey
Posts: 442
|
Re: Rotorpros drilled/slotted
I have used rotor pros for several mustangs Ive had through the years and never had any complaints, they have great prices and even better customer service!
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|