|
|
General Registry Discussion Topics of Interest (Mach 1 Related or otherwise) for discussions that don't fit other forums. |
|
Thread Tools | Display Modes |
08-07-2015, 04:23 PM | #1 |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
CCI ammo
so now being out in the county on 14acres, I know I cannot carry the good old 410 shotgun with me on my mower. I had to clear the front and back pastures and the back held a few snakes, I finally got my .40 cal and took it with me, only saw one after I had it with me and I'm sure I missed the **** thing. the one before that was a copper head and tried to run him over, but i'm sure he sneaked on by. my ex-father n law told me about the CCI rat shot ammo, which I finally got on line and finally found some for my .40 cal, which was kewl because the place was right up the road. So now I am ready!
I know it will be a endless journey of snakes being around here, but each one I shoot is one less to deal with. Hope I do not offend any snake lovers, but the snakes are not welcome out here. So has anyone else used the CCI ammo? if so pros/cons about it? ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh |
08-07-2015, 04:33 PM | #2 |
700 HP Mach
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
|
Re: CCI ammo
didnt realize they had it for a .40. It sounds like the stuff Ive used in a 22 before, it worked fine on small snakes but I wouldnt be thrilled about it on a bigger snake. I would imagine it would do just fine in your caliber.
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater |
08-07-2015, 04:56 PM | #3 | |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
Re: CCI ammo
Quote:
I figure the 40 cal will do fine, my ex father n law has it for his 45 and killed a cotton mouth with no problem, so i'm sure the 40 will do good ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh |
|
08-07-2015, 06:22 PM | #4 |
Registered User
Join Date: Nov 2003
Location: TX.
Posts: 2,511
|
Re: CCI ammo
Look out for Cobras. Some idiots are bringing them into Texas. One found dead on the road in Austin and one in a hotel in Houston. Like we don't have enough rattlers, copperheads, and moccasins.
__________________
03 Mach DSG Build Date 07/25/03 Feb 09 N2O 10.91 @ 124.21(1.55 60ft) Feb 09 NA 11.85 @ 112.87 (1.60 60ft) |
08-07-2015, 06:28 PM | #5 |
Registered User
Join Date: Nov 2003
Location: TX.
Posts: 2,511
|
Re: CCI ammo
Just saw this...
You can legally keep a monocled cobra in Texas. State law does not require a license for having one, but it does require a controlled exotic animal permit that you can get with a $30 fee.
__________________
03 Mach DSG Build Date 07/25/03 Feb 09 N2O 10.91 @ 124.21(1.55 60ft) Feb 09 NA 11.85 @ 112.87 (1.60 60ft) |
08-07-2015, 06:38 PM | #6 | |
700 HP Mach
Join Date: Nov 2003
Location: Orlando, FL
Posts: 8,384
|
Re: CCI ammo
Quote:
maybe the pythons we have here arent so bad afterall!
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc... '12 F150 FX2 Supercrew with Ecoboost daily beater |
|
08-07-2015, 10:29 PM | #7 |
Registered User
Join Date: Mar 2007
Location: Waaayy out in the country,leave your GPS at home!
Posts: 4,825
|
Re: CCI ammo
Alright, a snake pic thread, this is what I encounter on a regular basis
I use a Bond Arm derringer chambered in 3" .410 and .45 colt
__________________
2003 DSG Mach 1-03 Cobra Term/T56 swap: 2.3L Whipple,3.37 Upper,4 lb.lower, ID 1000 injectors,LCD cooling mod,Billetflow idlers,200A Alt,oil cooler delete with MMR adapter plate,MM oil filter kit,FrozenBoost Heat Exchanger Flowtech L.T., Maganaflow O/R X with Magnapacks, FRRP D.S.,T-56 with 26 spline input shaft and anti venom mod with reverse lockout box, FR steel flywheel,Spec Stage 3+,Moser 31 spline axles,FR 3.73 gear Tuned by B.Kurgan 601Hp/558/Tq |
08-07-2015, 10:58 PM | #8 | |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
Re: CCI ammo
Quote:
ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh |
|
08-07-2015, 10:59 PM | #9 | |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
Re: CCI ammo
Quote:
ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh |
|
08-07-2015, 11:35 PM | #10 |
Registered User
Join Date: Nov 2003
Location: TX.
Posts: 2,511
|
Re: CCI ammo
Right!
__________________
03 Mach DSG Build Date 07/25/03 Feb 09 N2O 10.91 @ 124.21(1.55 60ft) Feb 09 NA 11.85 @ 112.87 (1.60 60ft) |
08-08-2015, 05:40 PM | #11 |
Psycho Dog is Psycho
Join Date: Sep 2008
Location: Lewisville, TX
Posts: 1,990
|
Re: CCI ammo
if they go bang every time you pull the trigger and don't leave a lot of residue in the chamber or barrel then there's no issues.
|
10-23-2015, 11:56 AM | #12 |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
Re: CCI ammo
Well couple more snakes have gotten the CCI ammo used on them
one copperhead and other a black racer [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] [IMG][/IMG] ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh |
10-23-2015, 02:31 PM | #13 |
Registered User
Join Date: Nov 2003
Location: TX.
Posts: 2,511
|
Re: CCI ammo
I was going to reply to your other post about watching out for the snakes With that pond I'm pretty sure there are some Moccasins also. Have fun and be careful.
__________________
03 Mach DSG Build Date 07/25/03 Feb 09 N2O 10.91 @ 124.21(1.55 60ft) Feb 09 NA 11.85 @ 112.87 (1.60 60ft) |
10-23-2015, 02:36 PM | #14 | |
Soldier for Christ
Join Date: May 2009
Location: Willis, TX at The Daddy ASh Ranch
Posts: 30,596
|
Re: CCI ammo
Quote:
ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh |
|
10-27-2015, 07:53 PM | #15 |
Registered User
Join Date: Jan 2004
Location: Grants Pass, Oregon
Posts: 1,777
|
Re: CCI ammo
CCI is good quality ammo! I use the shotshells in .22, .22WMR, 38 &357 Mag so far. Pretty short range in comparison but that makes it safer in town! LOL...I got 6-7 gophers with the .22 one big RAT with the WMR...and a patterning target with the 38's & 357...I love them a lot...They have a plastic cup to hold the shot while traveling down the barrel. Protects the rifling that way.
The Rat I was kinda proud of....he ran like lightening I drew the Ruger Single Six ...thumbed the hammer back & dropped him in the blink of an eye! Deader than a doornail at 100 feet! Ok make that 10-12 feet....but he was moving!
__________________
I drive a slow Mustang....but I drive it Slow....HARD! |
11-03-2015, 11:21 PM | #16 |
My First Mach, Jan. 1969
Join Date: Jan 2005
Location: Tacoma, Washington
Posts: 13,070
|
Re: CCI ammo
I hate snakes.
__________________
I couldn't repair your brakes, so I made your horn louder. Mach 1 owner since January 1969. First ride in a P51D August 28,2010. Member Based in Kent, Washington, Pacific Cascade Mustang Club is the only original Mustang club in the Puget Sound Area and according to Mustang Club of America, we are the oldest in the nation. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|