WTB some bolt ons for mach1 - 2003-04 Mach 1 Registry Owners Club

slowblue4V · 12-06-2012, 12:51 PM

just purchased a bone stock screamin yellow 04 mach 1 and wanting to do some small upgrades. already have exhaust and K&N cai on the way. I'm looking for a few things to start:

Short throw shifter
1/2" intake spacer
SCT or diablo tuner

If you have something you might think i'd be interested in just shoot me a pm!
thanks guys

934vModFox · 12-06-2012, 01:03 PM

Are you sure it is an 03 Screaming Yellow...

SY were 04 and Zinc Yellow were 03.

I might have 2 of the 3 available really soon.

Will let you know.

NativePony · 12-06-2012, 03:05 PM

4:10 gears are a good upgrade for manual Mach 1's. I fought the urge to do it for about 4 years but when I finally had them installed I was very happy with them

TRbetngu · 12-06-2012, 03:36 PM

Quote:

Originally Posted by NativePony

4:10 gears are a good upgrade for manual Mach 1's. I fought the urge to do it for about 4 years but when I finally had them installed I was very happy with them

+1...Gears are the best mod for the money IMO!

slowblue4V · 12-06-2012, 05:21 PM

Quote:

Originally Posted by NativePony

4:10 gears are a good upgrade for manual Mach 1's. I fought the urge to do it for about 4 years but when I finally had them installed I was very happy with them

I'm going to do 4.10s when i do 31 spline axles. just worried about the basics. nitrous slicks and suspension come after taxes!

bwgd0n3mach · 12-07-2012, 12:48 AM

http://www.mach1registry.org/forums/...d.php?t=125662 here's ya an sct.. local Guy where I'm from. Pm him

LXS · 12-07-2012, 03:15 AM

Go big or go home, 4.56s FTW!!

hecdel40 · 12-07-2012, 07:42 AM

I have an SCT 2 for sale let me know if you're interested.

Vndcatr · 12-07-2012, 09:58 AM

I have a Mezeire elec waterpump ! .. $200 shipped

let me know

slowblue4V · 12-07-2012, 12:54 PM

Quote:

Originally Posted by Vndcatr

I have a Mezeire elec waterpump ! .. $200 shipped

let me know

I'll have to think about that. I've never ran one on a daily driver.

Whats the difference between SCTx2 and x3?

934vModFox · 12-07-2012, 01:07 PM

I have a SCT 3 Bama Tuner 5 unlocks...

MGW Shifter...

$400 shipped for the pair.

C Vo · 12-07-2012, 01:41 PM

I have a spacer. Have to check which size it is though.

slowblue4V · 12-07-2012, 08:41 PM

Quote:

Originally Posted by 934vModFox

I have a SCT 3 Bama Tuner 5 unlocks...

MGW Shifter...

$400 shipped for the pair.

I am picking up a tuner locally i hope. how much for just shifter?

And C Vo pm sent

934vModFox · 12-11-2012, 10:37 PM

$175 shipped

systemdz · 12-12-2012, 12:25 AM

I have a Hurst shifter. $90 shipped

ASH302 · 12-12-2012, 12:34 AM

i got a SCT Live wire for $360shipped

ASh

slowblue4V · 12-12-2012, 11:31 AM

i have a shifter now. thanks guys! sending you pm ash302

934vModFox · 12-12-2012, 11:33 AM

If you havent picked up a tuner I can do mine for $250 shipped

12-06-2012, 12:51 PM	#1
slowblue4V Registered User Join Date: Dec 2011 Location: Corydon, IN Posts: 111	WTB some bolt ons for mach1 just purchased a bone stock screamin yellow 04 mach 1 and wanting to do some small upgrades. already have exhaust and K&N cai on the way. I'm looking for a few things to start: Short throw shifter 1/2" intake spacer SCT or diablo tuner If you have something you might think i'd be interested in just shoot me a pm! thanks guys Last edited by slowblue4V; 12-06-2012 at 05:20 PM.

12-06-2012, 01:03 PM	#2
934vModFox Screaming Yellow Join Date: Sep 2011 Location: Houston, TX Posts: 676	Re: WTB some bolt ons for mach1 Are you sure it is an 03 Screaming Yellow... SY were 04 and Zinc Yellow were 03. I might have 2 of the 3 available really soon. Will let you know. __________________ 2004 Screaming Yellow Mach 1

12-06-2012, 03:05 PM	#3
NativePony Girls Drag Race in Heels Join Date: Jan 2008 Location: Pembroke, NC Posts: 531	Re: WTB some bolt ons for mach1 4:10 gears are a good upgrade for manual Mach 1's. I fought the urge to do it for about 4 years but when I finally had them installed I was very happy with them __________________ Cheryl's 2004 Mach 1 Eaton Swapped Stock Pulley,8lbs of boost: 431/406 Conservative Tune 2.9 Pulley, 11 lbs of boost: 487/490 Conservative Tune Installed and Tuned by Fastlane Motorsports Exhaust: Bassani offroad x, Bassani Midlength Headers, Flowmaster Catback, JLT Fenderwell Cold Air Intake, 4:10 Gears, Caster Camber Plates, Steeda Sport Springs, 17x9/17x10.5 Chrome Bullitt Rims

12-07-2012, 12:48 AM	#6
bwgd0n3mach Registered User Join Date: Sep 2012 Location: Bloomington, indiana Posts: 24	Re: WTB some bolt ons for mach1 http://www.mach1registry.org/forums/...d.php?t=125662 here's ya an sct.. local Guy where I'm from. Pm him

12-07-2012, 03:15 AM	#7
LXS Registered User Join Date: Jun 2008 Location: So Cal Posts: 1,533	Re: WTB some bolt ons for mach1 Go big or go home, 4.56s FTW!! __________________ 2003 Black Mach 1 K&N RAI Magnaflow O/R X-pipe Mac catback t45 swap (BEST decision of my life!!!) Don't fear the gear! I'm not a real mechanic, I just play one online...

12-07-2012, 07:42 AM	#8
hecdel40 Registered User Join Date: May 2008 Location: Waveland MS Posts: 326	Re: WTB some bolt ons for mach1 I have an SCT 2 for sale let me know if you're interested.

12-07-2012, 09:58 AM	#9
Vndcatr SVT Join Date: Jun 2010 Location: Northern California Posts: 812	Re: WTB some bolt ons for mach1 I have a Mezeire elec waterpump ! .. $200 shipped let me know __________________ 2001 Zinc yellow SVT Cobra Forged 11.5CR 284ci Comp 106500 cams - Degreed 01 cobra Heads - tastefully modded Roys ported/polished Intake Kooks longtubes, Magnaflow catback D&D T3650, Mgw shifted FTB Goodies, 4.30s, FRPP diff cover, 31 splined IRS 04 cobra interior , black termy seats, Speedhut gauges Tubular K, MM coilovers/ Koni SA yellows Starkweather tuned, 24* timing on 91 octane 11.7 @ 117mph 1.62 60ft. Raceweight 3200lbs Next up:Sullivan intake and hat, self tuning..

12-07-2012, 01:07 PM	#11
934vModFox Screaming Yellow Join Date: Sep 2011 Location: Houston, TX Posts: 676	Re: WTB some bolt ons for mach1 I have a SCT 3 Bama Tuner 5 unlocks... MGW Shifter... $400 shipped for the pair. __________________ 2004 Screaming Yellow Mach 1

12-07-2012, 01:41 PM	#12
C Vo Registered User Join Date: Feb 2012 Location: Houston Posts: 501	Re: WTB some bolt ons for mach1 I have a spacer. Have to check which size it is though.

12-11-2012, 10:37 PM	#14
934vModFox Screaming Yellow Join Date: Sep 2011 Location: Houston, TX Posts: 676	$175 shipped __________________ 2004 Screaming Yellow Mach 1

12-12-2012, 12:25 AM	#15
systemdz systemdz Join Date: Mar 2010 Location: Murray, KY Posts: 1,131	I have a Hurst shifter. $90 shipped __________________ 2003 Mach 1 Torch Red, 4.6 WAP block .20 coated manley pistons, manley h-beams, 98 cobra cam, BTR springs, Fererra valves, BC auto 4r75w w Freddie Brown MVB w brake, CircleD 4c, built rear and baseline drag suspension. NOS wet kit w NANO.

12-12-2012, 12:34 AM	#16
ASH302 Soldier for Christ Join Date: May 2009 Location: Willis, TX at The Daddy ASh Ranch Posts: 30,596	Re: WTB some bolt ons for mach1 i got a SCT Live wire for $360shipped ASh __________________ 2001 lazer red v6 Mustang coupe sold in Aug 2006 2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012 2013 grey 6 speed coupe GT Mustang Sold in Feb 2014 2013 RED Dodge Charger R/T Sold Nov 2014 2002 custom Blue 02 Auto Trans AM Sold June 2015 1998 Cobra Black Sold summer 2016 Current 2009 Ford F350 FX4 March 2017 (work truck) 2003 OW 5.0 Mach 1 Aug 2020 ASh

12-12-2012, 11:31 AM	#17
slowblue4V Registered User Join Date: Dec 2011 Location: Corydon, IN Posts: 111	Re: WTB some bolt ons for mach1 i have a shifter now. thanks guys! sending you pm ash302

12-12-2012, 11:33 AM	#18
934vModFox Screaming Yellow Join Date: Sep 2011 Location: Houston, TX Posts: 676	Re: WTB some bolt ons for mach1 If you havent picked up a tuner I can do mine for $250 shipped __________________ 2004 Screaming Yellow Mach 1

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)