electric cutouts - 2003-04 Mach 1 Registry Owners Club

wutang61 · 03-09-2008, 06:19 PM

im tossing around the idea of slapping on some E cutouts for some extra rumble at the local cruises. what would be the best set to go with?

PharmDMach1 · 03-09-2008, 06:48 PM

I have heard good things about Quicktime performance's electric cutouts.

Heres a link http://www.quicktimeperformance.com/QTEC/index.php

3150Mach1 · 03-09-2008, 08:07 PM

Quote:

Originally Posted by PharmDMach1

I have heard good things about Quicktime performance's electric cutouts.

Heres a link http://www.quicktimeperformance.com/QTEC/index.php

Those are on my wish list.

hawk · 03-09-2008, 08:37 PM

Quote:

Originally Posted by 03Mach150BP

Those are on my wish list.

They won't pass VA inspection.

Furinox · 03-09-2008, 08:41 PM

Quote:

Originally Posted by hawk

They won't pass VA inspection.

and electric ones will scrape if you run over a pebble.

you'll literally have like a 1" ground clearance.

wutang61 · 03-09-2008, 10:56 PM

they don't look like they hang 3 inches lower then the exhaust?

your serious? they supposed to be legal as long as there closed?

Sublimemach · 03-09-2008, 11:10 PM

lol i heard a lightning with these last week.. HOLY HELL its loud lol

GET THEM! if you can, that would be awesome

hawk · 03-10-2008, 03:19 AM

Quote:

Originally Posted by wutang61

they don't look like they hang 3 inches lower then the exhaust?

your serious? they supposed to be legal as long as there closed?

Dunno, man. A kid at work had them on his hot rod crown vic, and after three inspection stations called him on them, he took 'em off.

CZERsMach1 · 06-27-2008, 12:04 AM

Quote:

Originally Posted by wutang61

im tossing around the idea of slapping on some E cutouts for some extra rumble at the local cruises. what would be the best set to go with?

Did you ever get the cutouts??
im thinking of getting some.

mach1 03 · 06-27-2008, 12:22 AM

I’ve thought about getting them a knowing me I probable will but they are just so expensive.

FastEddie09 · 06-27-2008, 12:50 AM

Ok, so what are the disadvantages performance wise? Will you lose low end torque? I saw a guy with a GTO at the store with these, and the shop that installed em is right around the corner from me.

Are the rwhp gains listed realistic?

wutang61 · 06-27-2008, 02:56 AM

i wouldnt do it to get horsepower. i was gonna do it for sound.

but no ended up not getting them.

03AV8R · 06-27-2008, 11:38 AM

My link is here for my Electric Cutouts.. They never hung down?? Why would they?? Bad installer maybe??

http://www.mach1registry.org/forums/...t=exhaust+pics

mach1 03 · 06-27-2008, 01:36 PM

I would love being able to drive on the highway without it being defining but then get into town and opener up, that would be sweet.

Sublimemach · 06-27-2008, 02:02 PM

my neighbors are all a**holes.. i always get complained on.. my car is "too loud".. yesterday when i left. i barely got on it. this was 3pm btw.. and they still complained. i idle in my neighborhood if its past 8pm or so. that have no reason to complain. i wish i could get some E cutouts. and put some quiet mufflers on my car. that way i can rev it. and then leave with quiet exhaust lol. that way they can say its not me.. that would be funny

03-09-2008, 06:19 PM	#1
wutang61 CAT MASTA! Join Date: Jun 2007 Location: Vero Beach, Florida Posts: 3,406	electric cutouts im tossing around the idea of slapping on some E cutouts for some extra rumble at the local cruises. what would be the best set to go with? __________________ 04' Torched *6-speed* Build Date: 02/25/2004 Ported Eaton @7psi Viper T-56 Built 8.8,4.10's 441/402

03-09-2008, 06:48 PM	#2
PharmDMach1 Whipple Blown! Join Date: Jul 2005 Location: Coral Springs, FL Posts: 642	Re: electric cutouts I have heard good things about Quicktime performance's electric cutouts. Heres a link http://www.quicktimeperformance.com/QTEC/index.php __________________ 2003 Mach 1- Whipple 2.3 2008 GT- STS Single Turbo

03-09-2008, 10:56 PM	#6
wutang61 CAT MASTA! Join Date: Jun 2007 Location: Vero Beach, Florida Posts: 3,406	Re: electric cutouts they don't look like they hang 3 inches lower then the exhaust? your serious? they supposed to be legal as long as there closed? __________________ 04' Torched *6-speed* Build Date: 02/25/2004 Ported Eaton @7psi Viper T-56 Built 8.8,4.10's 441/402

03-09-2008, 11:10 PM	#7
Sublimemach 2013 5.0 Join Date: Jan 2006 Location: Houston, Tx Posts: 2,245	Re: electric cutouts lol i heard a lightning with these last week.. HOLY HELL its loud lol GET THEM! if you can, that would be awesome __________________ https://youtu.be/FGEHkAtgNb8 Cars owned: 2016 guard green 5.0 bagged on copper rovos DAILY 2004 manual CO Mach 1 SOLD 2013 Perf. white A6 5.0, recaro's, full exhaust 2004 CO auto Mach 1.bagged. full bolt on, full exhaust, Slammed & Cammed! 341/310 WEEKEND CAR 2001 Mineral Grey GT. few bolt ons. WRECKED 1998 Laser Red V6. wheels and exhaust. SOLD

06-27-2008, 12:22 AM	#10
mach1 03 Registered User Join Date: Apr 2007 Location: Baltimore, MD Posts: 2,780	Re: electric cutouts I’ve thought about getting them a knowing me I probable will but they are just so expensive.

06-27-2008, 12:50 AM	#11
FastEddie09 Registered User Join Date: Apr 2008 Location: Chicago, IL Posts: 370	Re: electric cutouts Ok, so what are the disadvantages performance wise? Will you lose low end torque? I saw a guy with a GTO at the store with these, and the shop that installed em is right around the corner from me. Are the rwhp gains listed realistic? __________________ 2003 Mach 1 (The Black Slowmatic) 13.1 @ 106mph / 2.05 60ft before stall and dr Tuned by Tim Barth @ Mr Norms Garage 4200 Stall - BC Automotive Nitto NT05-R 275/40/17 MM FLSFC HPM Megabite JR LCAs CHE adjustable UCAs Tociko D-Specs Eibach Pro Kit 31 Spline Cobra diff 31 Spline Mosers FRPP Axle girdle 4.10 Gears FRPP Aluminum DS K&N Intake Intake spacer 3/8 O/R X pipe w/ Magnaflows Shaker air diverter

06-27-2008, 02:56 AM	#12
wutang61 CAT MASTA! Join Date: Jun 2007 Location: Vero Beach, Florida Posts: 3,406	Re: electric cutouts i wouldnt do it to get horsepower. i was gonna do it for sound. but no ended up not getting them. __________________ 04' Torched *6-speed* Build Date: 02/25/2004 Ported Eaton @7psi Viper T-56 Built 8.8,4.10's 441/402

06-27-2008, 11:38 AM	#13
03AV8R Terrible Dyno Car! Join Date: Aug 2003 Location: Epping, NH Posts: 6,666	Re: electric cutouts My link is here for my Electric Cutouts.. They never hung down?? Why would they?? Bad installer maybe?? http://www.mach1registry.org/forums/...t=exhaust+pics __________________ 2003 Mach1 4-Speed Stick Axles of Evil Racing Bolt-On's All the good ones :PIMP: running 11.17's N/A on the stock factory motor. Results Best 1/4 mile 11.174 (Slicks) 11.2's (Quick TP's) 12.072 (17" Street Stocker wheels & tires) Best MPH 119.22 Best 60' 1.474 (With ET Drags) 1.51 (Quick TP's) 1.8's (17" stockers)

06-27-2008, 01:36 PM	#14
mach1 03 Registered User Join Date: Apr 2007 Location: Baltimore, MD Posts: 2,780	Re: electric cutouts I would love being able to drive on the highway without it being defining but then get into town and opener up, that would be sweet.

06-27-2008, 02:02 PM	#15
Sublimemach 2013 5.0 Join Date: Jan 2006 Location: Houston, Tx Posts: 2,245	Re: electric cutouts my neighbors are all a**holes.. i always get complained on.. my car is "too loud".. yesterday when i left. i barely got on it. this was 3pm btw.. and they still complained. i idle in my neighborhood if its past 8pm or so. that have no reason to complain. i wish i could get some E cutouts. and put some quiet mufflers on my car. that way i can rev it. and then leave with quiet exhaust lol. that way they can say its not me.. that would be funny __________________ https://youtu.be/FGEHkAtgNb8 Cars owned: 2016 guard green 5.0 bagged on copper rovos DAILY 2004 manual CO Mach 1 SOLD 2013 Perf. white A6 5.0, recaro's, full exhaust 2004 CO auto Mach 1.bagged. full bolt on, full exhaust, Slammed & Cammed! 341/310 WEEKEND CAR 2001 Mineral Grey GT. few bolt ons. WRECKED 1998 Laser Red V6. wheels and exhaust. SOLD

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)