|
Re: Hanging/Slow dropping RPM FIX inside.
Quote:
|
Originally Posted by GOTMONKEYS1
GREAT MOD. THANKS. I DO HAVE ONE PROBLEM. MAYBE SOMBODY OUT THERE HAS HAD THE SAME. I WENT WITH THE 9/32 SECOMD HOLE LIKE YOU REC. LOVE THE IDLE DROP AND THE (BURBLE). MY PROB. IS THAT I HAVE A HIGH IDLE(1100-1300RPM). EVERY KNOW AND THEN IT WILL CUASE A CKECK ENGINE LIGHT. I AM LUCKY ENOUGH TO BE ABLE TO SCAN MY OWN CAR AND THE CODE THAT POPS UP IS P0507-IDLE CTRL SYSTEM RPM HIGHER THAN EXPECTED. DID I DO SOMTHING WRONG OR IS THIS NORMAL FOR THIS MOD. UNFORTUNATLY I AM GOING TO TAKE THE PLATE OUT TILL I CAN FIND OUT WHAT IS WRONG. ANYBODY GOT ANY SOLUTIONS. THANK  |
I've done two cars with my homemade IAC plates, no problems. Did you disconnect the battery and do the idle thru drive cycle procedure for the computer? If you did this already it maybe an unrelated problem. If under warranty, take or keep the plate out and get it fixed. Good luck, let us know what the problem is.
__________________
_____________________________________________
2003 Mach1 AB 5spd
2004 Mach1 TR 5spd (sold)
1933 Ford 3W Coupe (4.6 dohc Stack Injection)
2003 Cobra TR (sold)
2014 Mustang GT (Track Pack) in Black
|