|
Re: How to change your 5 speed to an automatic
Hey Guys, I have a problem with ma tranny swap. But its a auto to manual swap.
I had swap all parts.
Tremec 3650
Driveshaft
Shifter
Shifter Bezel
Flywheel
Clutch
Clutch Pedal
Manual Steering Column
Manual Transmission Harness
2004 Mach1 ECU - TMX2
and a lot of small Parts...
I know that i have to flash the ECU to disable or reset PATS. The Mach1 is in a Shop. The guys in this shop has swapped GT500 with auto Trans and some other big builts. All the ECU´s and files to flash came from Lund Racing. But we dont bring the car to start.
My Mach1 is still 12 Months in the Shop for the swap... I have read about a Chip for the ECU to disable PATS. I found one who has swapped also from auto to manual. He used a "QuarterHorse" Chip from moates.net.
Maybe someone has a solution. Sry for my not perfect english...
Thanks for help and greetings from germany
|