Quote:
Originally Posted by Darrin
You're doing fine. I don't have the software to draw it up, but I'm pretty sure you could make those circuits latching on-off so that you can use a single momentary for each by adding 2 more relays and 2 more diodes. 1 extra relay and diodes would get you the latching circuit and the 2nd would provide the kill signal from brake input.
What are you drawing with?
|
I would greatly prefer to have a single momentary on/off switch for each, and have been trying to work it out, but I'm still a amateur at designing electronics. With all of the above I found the basic templates and changed them the best I could to suit my needs using ms paint. I draw each item off to the side, then copy/paste them where needed, then draw the wires with the line tool. Nothing fancy for sure. I can't really understand a actual electronics schematic with symbols. I need something that shows me where each wire goes for now. If you want to copy/paste what I have above into paint and draw it up as you described it would help greatly.