View Single Post
Old 08-27-2013, 02:06 PM   #25
TKat13
Mach-T
 
TKat13's Avatar
 
Join Date: Jun 2004
Location: DFW
Posts: 2,865
Re: TKat13's Mach1 Build Log

Update on the heads; took a couple quick pictures of the ported heads, the custom turbo billet cams also arrived this week.









Still working on the rear, need to adjust the pinion depth, when I went to pull the bearing off of the pinion I discovered that my press was a bit small for that huge pinion gear on 3.08s. So, I could not press off the bearing. Threw the towel in and HPP has the rear. They will set the pinion and install the diff/backlash etc. I will complete it from there. Bottom line, I am working to many hours and don't have much time left over. Hope to have it back in the car this week.
__________________
Darrell
Black '04 Mach 1
Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67
(100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88
New build - 750rwhp; not track tested (yet)
Mods: Build Log
Paint&Body
Tuned by Manny @ HPP
TKat13 is offline   Reply With Quote