View Single Post
Old 06-22-2018, 04:26 PM   #14
mikeracing
MECHANIC
 
mikeracing's Avatar
 
Join Date: Jun 2012
Location: Morgantown, WV
Posts: 916
Re: anyone bend a mainshaft?

Update.
Totally dissasembled trans. No bearing issues mainshaft isnt bent that i could find, input wasnt bent or twisted. All bearings fine. No signs of a reason for a vibration. The only thing i found was the broken speedo gear (1 piece missing) bearing endplay was all at the max of the spec. I dont have shims small enough so its going back in for now. Maybe the speedo gear missing piece was the high speed vibration?

Spare tranny i got for parts i tore down (01 trans with the taller 5th gear ) found the reverse syncros Hammered, the fork pads broke and the syncro slider ate into the shift fork. I got carbon fiber syncros for this trans since it would be better on a road course. I am gonna weld up the fork and install carbon fiber syncros i got for it. When its ready it will go in the car

Last edited by mikeracing; 06-30-2018 at 07:44 PM.
mikeracing is offline   Reply With Quote