|
Re: Eaton Swap.....
Ngk tr6 or part number ngk4177, gap them at .032 or if you have a feeler gauge it would work also. That's prob why your getting some sort of detonation.
__________________
**SOLD**04' Mach 1
-Comp Cams 106100's (deg 106/110)
-Eatonswap with 3.4 Pulley
-Full Exhaust (mac lts & xpipe, sss terminator c/b)
-Built Rear w/ 3.55 gears
[B]-Tuned by Lethal Performance of San Antonio
-510hp/478tq
|