2003-04 Mach 1 Registry Owners Club - View Single Post - Removing Valve Covers and Installing Cobra Cams

Chances50 · 06-24-2011, 06:17 PM

One thing that will save others time an money, you don't have to buy valve cover gaskets as long as the stock ones didn't get ripped in half coming out you can reuse them, also the cam bolts you can get from ford for $10 each and you can reuse the stock washers. I recommend just ordering the Cloyes gears if you can swing it, because if your like me you'll throw them in dot to dot and 2 months down the road wonder if you'll pick up power by degreeing and advancing them. Mach828, this is a great write up the we all will learn to love you for this so we dont have to see a 96-98 cobra cam install thread again.lol

I'm going to try to degree my cams in a few months I'll try to get good write up with pics for that ad well.

06-24-2011, 06:17 PM	#45
Chances50 Registered User Join Date: Jun 2008 Location: Haskell, Ok Posts: 1,325	Re: Removing Valve Covers and Installing Cobra Cams - A Complete How To With Pics One thing that will save others time an money, you don't have to buy valve cover gaskets as long as the stock ones didn't get ripped in half coming out you can reuse them, also the cam bolts you can get from ford for $10 each and you can reuse the stock washers. I recommend just ordering the Cloyes gears if you can swing it, because if your like me you'll throw them in dot to dot and 2 months down the road wonder if you'll pick up power by degreeing and advancing them. Mach828, this is a great write up the we all will learn to love you for this so we dont have to see a 96-98 cobra cam install thread again.lol I'm going to try to degree my cams in a few months I'll try to get good write up with pics for that ad well.