|
Re: What oil filter?
Quote:
Originally Posted by ab_mach1
I've used the K&N many times over the years without a problem. Last fill, I went with a Mobil 1 (M1-210A) because I read an article on Consumer Reports about their quality compared to all the others and it was dubbed best. I didn't notice any difference, so I tried an Amsoil (EA011) the most recent fill and didn't notice a difference there either. I'll probably just go with the Motorcraft FL-820S this summer when I change the oil. I just want a consistent quality built filter and I feel like Amsoil, Mobil 1, and Motorcraft will meet that need compared to others out there.
|
unless you're doing an oil analysis after each change I don't think you're going to "see" a difference, especially not in a single change interval. It would be one of those things over the life of the vehicle wear may end up being accelerated or you have a filter failure and lose a motor.
__________________
03 dsg mach1 - MPR built 9.5:1 motor, D1, cams, ported intake, full exhaust, magnum t56, built rear, E85 etc...
'12 F150 FX2 Supercrew with Ecoboost daily beater
|