Quote:
Originally Posted by liv2roc
I just broke two of mine saturday changing the spark plugs. I went to my local pullapart and got the complete harness off a big 4 door 4.6 Mercury monarch for $3
I got 8 of them and cut one up to see how it went together. you need a small flat screwdriver like use to repair eye glasses. remove some of the electrical tape from the wires next to the clip so you can pull one wire at a time. in the end of the clip use the screwdriver to ply the red plastic piece out the clip. now use the screwdrive and push it in the end of the clip like in picture and pull on the wire should come right out
|
thanks this was very helpful