|
Re: repainting hood body work needed
Quote:
Originally Posted by White04Mach
When my cousin filled my decklid holes on my junkyard decklid, he grinded the holes with a small 36 grit disk for a good bite and then put tape on the backside of the hole and used duraglass (basically bondo with fiberglass hairs in it) and filled the holes with it and let it dry. Then ground it back down with 36 grit (duraglass is very tough) and then smoothed it with a thin layer of bondo. Sanded smooth and primed the entire decklid and left it out in the sun to bake for a entire week so if any shrinkage occurs in the bondo/duraglass/primer it can be blocked out before paint.
|
thanks for the tip, i have the time since i don't have to drive the mach
i just think its going to be hard getting from under the hood, just really tight there,
ASh
__________________
2001 lazer red v6 Mustang coupe sold in Aug 2006
2004 screaming yellow 5.0 sc Mach 1 sold in Oct 2012
2013 grey 6 speed coupe GT Mustang Sold in Feb 2014
2013 RED Dodge Charger R/T Sold Nov 2014
2002 custom Blue 02 Auto Trans AM Sold June 2015
1998 Cobra Black Sold summer 2016
Current
2009 Ford F350 FX4 March 2017 (work truck)
2003 OW 5.0 Mach 1 Aug 2020
ASh
|