Quote:
Originally Posted by not a gt
Get a threaded rod instead of the 2 studs that come in the kit. By the time you get them in the timing cover they will be really short...I bottomed out into cover and cut the length about 1" PAST headunit bracket. Also run a tap FIRST in all the holes including alternator mounts and once you get them in, use red lock tite on them so they don't spin when you remove the headunit..align, align align, all cars are different doesn't take much for belt to jump a tooth.Also get ATI idler lined up, thread into peanut tight, rotate peanut to align with alt. bracket, remove then tighten down alt side then install idler with blower. See my thread for some other stuff and good luck.
|
^^^^^^This, the studs ATI sent me were WAY too short. Threaded rod 8mmx1.25.