It could also be that the hole maybe too small. Every Mach is different and depending on your location could have this effect. I would recommend enlarging the hole to 11/32s. I've had great success with it at that diameter.
Quote:
|
Originally Posted by GOTMONKEYS1
GREAT MOD. THANKS. I DO HAVE ONE PROBLEM. MAYBE SOMBODY OUT THERE HAS HAD THE SAME. I WENT WITH THE 9/32 SECOMD HOLE LIKE YOU REC. LOVE THE IDLE DROP AND THE (BURBLE). MY PROB. IS THAT I HAVE A HIGH IDLE(1100-1300RPM). EVERY KNOW AND THEN IT WILL CUASE A CKECK ENGINE LIGHT. I AM LUCKY ENOUGH TO BE ABLE TO SCAN MY OWN CAR AND THE CODE THAT POPS UP IS P0507-IDLE CTRL SYSTEM RPM HIGHER THAN EXPECTED. DID I DO SOMTHING WRONG OR IS THIS NORMAL FOR THIS MOD. UNFORTUNATLY I AM GOING TO TAKE THE PLATE OUT TILL I CAN FIND OUT WHAT IS WRONG. ANYBODY GOT ANY SOLUTIONS. THANK  |