Re: Power Window acting up
Your bushings inside the motor have flattened and are stuck. Take the motor out, open it up, remove the bushings, clean, grease up and when installing them flip the bushings. To prevent this from happening in the future, if you keep your car in the garage, roll up the window and just slightly tap the window button so pressure is not put on those bushings with the window in the full up position.
Did this to mine in 2009 and have never had a problem since. Also had this same issue in my daughters 04 GT and it still works like a champ. Or, buy a new motor. Sadly, you cannot buy that bushing anywhere, but that is the part they replace when they rebuild them.
good luck
__________________
Darrell
Black '04 Mach 1
Track Times (bone-stock w/drs):60 ft - 1.90 | 1/8 - 8.67
(100 shot,E85,4:10s,Street tire):60 ft - 1.67 | 1/8 - 7.88
New build - 750rwhp; not track tested (yet)
Mods: Build Log
Paint&Body
Tuned by Manny @ HPP
|